• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.385-385
• /
• 2012

A two terminal N+/P/N+ junction device to replace the conventional selective transistor was studied as a bilateral switching device for spin transfer torque (STT) MRAM based on 3D device simulation. An N+/P/N+ junction structure with $30{\times}30nm$ area requires bi-directional current flow enough to write a data by a drain induced barrier lowering (DIBL) under a reverse bias at N+/P (or P/N+ junction), and high current on/off ratio of 106. The SiGe materials are widely used in hetero-junction bipolar transistors, bipolar compensation metal-oxide semiconductors (BiCMOS) since the band gap of SiGe materials can be controlled by changing the fraction and the strain epilayers, and the drift mobility is increased with the increasing Ge content. In this work, N+/P/N+ SiGe material based junction provides that drive current is increased from 40 to $130{\mu}A$ by increased Ge content from 10~80%. When Ge content is about 20%, the drive current density of SiGe device substantially increased to 2~3 times better than Si-based junction device in case of 28 nm P length, which is sufficient current to operation of STT-MRAM.

• 아태비즈니스연구
• /
• 제3권2호
• /
• pp.23-33
• /
• 2012

Sustainable competitive advantage depends on formulation and implementation of appropriate human resource management (HRM) strategies and deployment of their competencies effectively in dynamic and complex environment. Competencies deployment is an approach to make decisions on the intentions and plans of organization concerning employment relationship and its recruitment, training, development, performance appraisal, reward and employee relations policies and practice. The improvement of organizational effectiveness is an overall objective of people management in organizations. In light of these, this study explores the present practices of HRM like: HR departments, HR policies and strategies, HR planning, recruitment selection and placement, training and development, performance appraisal, compensation and benefit, employee relations and communications. Based on the survey in 204 Nepalese organizations as a unit of analysis, the study concludes that HR practices in few organizations have action program for minorities, ethnic group, older employees and people with disabilities. Due to centralized organizational structure, most of HR decisions are taken into central office and line managers being involved highly in planning and implementing HR policies. In a nutshell, though HRM practices are not developed like developed countries, Nepalese organizations are realizing the significance of people management at work and changing their practices in the present dynamic environment.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.89-94
• /
• 2017

본 논문은 마크-젠더 변조기를 사용하여 광 신호를 생성하는 광 듀오바이너리 송신기들의 전송 특성을 이론적으로 분석하였다. 특히 단일 모드 광섬유를 통하여 분산 보상 방법에 대한 고려 없이 1550nm 파장에서 25Gbps 광 듀오바이너리 신호를 전송하는 여러 가지 형태의 송신기들에 대한 성능을 평가하였다. 각 송신기의 특성에 따라 광 듀오바이너리 신호 생성 방법이 다르기 때문에 광 파워 스펙트럼과 광 신호의 눈 열림에 특징이 있었으며 이로 인하여 전송 거리에 따른 분산 내성도 차이를 보였다. 모의실험 결과와 송신기 구조의 복잡성 및 제한 조건을 고려하여 25Gbps 전송에 적합한 송신기를 확인 할 수 있었다.

• 한국전자파학회논문지
• /
• 제8권6호
• /
• pp.581-588
• /
• 1997

시변 페이딩 이동무선채널은 전송 선호의 전폭, 주파수 그리고 위상까지 랜덤하게 왜곡시키며 시간적으로 변하는 스펙트럼 null 을 가진다. 이러한 채널에 대해 위상왜곡에 민감한 성질과 느린 수렴속도를 가지는 기존의 등화기는 열악한 에러 성능을 나타낸다. 이 논문에서는, 단순하면서도 빠른 수렴속도의 Data - Recycling 알고리듬 을 위상왜곡에 강한 Fractionally Spaced 동화기(FSE) 구조에 적용하였으며 시변 이동통신 페이딩 채널에 대 해 다른 기존의 둥화기들과 비교하여 그 성능을 평가하였다. 그 결과 Data-Recycling FSE는 시변 이동통신채널의 특성을 빠르게 추적하는 능력과 위상왜곡에 대한 효과적인 보상능력으로 상당한 BER 성능개선을 나타내었다.

• 한국지능시스템학회논문지
• /
• 제20권5호
• /
• pp.652-658
• /
• 2010

본 논문에서는 밸런싱 메커니즘의 두 바퀴 형태의 이동로봇(Two Wheeled Mobile Robot:TWMR)을 구현하고 제어한다. TWMR은 역진자 시스템과 이동로봇을 합친 모바일 역진자 구조로 기존의 막대 형태의 진자대신 두 팔 달린 로봇 형태를 나타낸다. 각도와 위치에 대한 동시제어에 있어 외란에 대한 강건성을 부여하기 위해 RBF 신경회로망 제어 방식을 사용한다. 신경회로망 제어 방식으로는 입력보상 방식(RCT)을 사용하여 제어기의 성능을 실험을 통해 검증한다. 또한 원격으로 제어가능하게 하도록 시스템을 구현하여 실험하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.67-69
• /
• 2007

PMSM (Permanent Magnet Synchronous Motor) current control is a most inner loop of electromechanical driving systems and it plays a foundation role in the hierarchy's control loop of several mechanical machine systems. In this paper, a simple RMRAC control scheme for the PMSM is proposed in the synchronous frame. In the synchronous current model, the input signal is composed of as a calculated voltage by adaptive laws and system disturbances. The gains of feed-forward and feed-back controller are estimated by the proposed e-modification methods respectively, where the disturbances are assumed as filtered current tracking errors. After the estimation of the disturbances from the tracking errors, the corresponding voltage is fed forward to control input to compensate for the disturbances. The proposed method is robust to high frequency disturbances and has a fast dynamic response to time varying reference current trajectory. It also shows a good real-time performance duo to it's simplicity of control structure. Through the simulations considering several cases of external disturbances and experimental results, efficiency of the proposed method is verified

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1195-1199
• /
• 1998

In this paper a design method of robust power system stabilizers is proposed by means of robust linear quadratic regulator design technique under power system's operating condition change, which is caused by inner structure uncertainties and disturbances into a power system. It is assumed that the uncertainties present in the system are modeled as one equivalent signal. In this connections an optimal LQR control input for disturbance rejection, the output feedback gain for eliminating the disturbance are calculated. In this case. PSS input signal is obtained on the basis of weighted ${\Delta}P_e$ and $\Delta\omega$. In order to stabilize the overall control of system. Pole placement algorithm is applied in addition. making the poles of the closed loop system to move into a stable region in the complex plane. Some simulations have been conducted to verify the feasibility of the proposed control method on a machine to infinite bus power system. From the simulation results validation of the proposed method could be achieved by comparisons with the conventional PSS with phase lag-lead compensation.

• 한국통신학회논문지
• /
• 제30권4A호
• /
• pp.320-327
• /
• 2005

본 논문에서는 뒷면도체를 부동도체로 갖는 CPW 방향성 결합기에서 방향성 향상을 위한 뒷면도체의 변형에 관하여 논하였다. 이때 뒷면도체는 dumbbell 모양의 일반화된 구조와 그 변형구조로 가운데 부분이 완전히 제거된 경우도 가지며, 결합도의 감소를 막기 위한 보완구조로 접지면에서 T자형으로 확장된 슬롯을 함께 사용하였다. T자형 슬롯을 갖고 뒷면도체의 변형을 통한 방향성의 개선방법은 결합도의 큰 감소 없이 방향성 개선을 이룰 수 있다. 1 GHz에서 설계된 T자형 슬롯과 뒷면도체를 갖는 CPW 방향성 결합기는 full-wave analysis를 사용한 EM solver의 계산 결과 및 측정 결과를 통하여 큰 결합특성의 감소 없이 높은 방향성 특성을 가짐을 확인하였다.

• ETRI Journal
• /
• 제34권3호
• /
• pp.379-387
• /
• 2012

In this paper, an error compensation technique for a dead reckoning (DR) system using a magnetic compass module is proposed. The magnetic compass-based azimuth may include a bias that varies with location due to the surrounding magnetic sources. In this paper, the DR system is integrated with a Global Positioning System (GPS) receiver using a finite impulse response (FIR) filter to reduce errors. This filter can estimate the varying bias more effectively than the conventional Kalman filter, which has an infinite impulse response structure. Moreover, the conventional receding horizon Kalman FIR (RHKF) filter is modified for application in nonlinear systems and to compensate the drawbacks of the RHKF filter. The modified RHKF filter is a novel RHKF filter scheme for nonlinear dynamics. The inverse covariance form of the linearized Kalman filter is combined with a receding horizon FIR strategy. This filter is then combined with an extended Kalman filter to enhance the convergence characteristics of the FIR filter. Also, the receding interval is extended to reduce the computational burden. The performance of the proposed DR/GPS integrated system using the modified RHKF filter is evaluated through simulation.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.70-82
• /
• 1993

In this paper, employing the 3-dimensional discrete cosine transform (DCT) for the utilization of the temporal correlation, an adaptive motion sequence coding technique is proposed. The energy distribution in a 3-D DCT block, due to the nonstationary nature of the image data, varies along the veritical, horizontal and temporal directions. Thus, aiming an adaptive system to local variations, adaptive procedures, such as the 3-D classification, the classified linear scanning technique and the VLC table selection scheme, have been implemented in our approach. Also, a hybrid structure which adaptively combines inter-frame coding is presented, and it is found that the adaptive hybrid frame coding technique shows a significant performance gain for a moving sequence which contains a relatively small moving area. Through an intensive computer simulation, it is demonstrated that, the performance of the proposed 3-D transform coding technique shows a close relation with the temporal variation of the sequence to be code. And the proposed technique has the advantages of skipping the computationally complex motion compensation procedure and improving the performance over the 2-D motion compensated transform coding technique for rates in the range of 0.5 ~ 1.0 bpp.