• Title/Summary/Keyword: Compensation standards

Search Result 162, Processing Time 0.029 seconds

Analysis of the Hebei Spirit Oil Spill Incident and its Aftermath (허베이 스피리트호 유류오염사고와 그 영향에 관한 분석)

  • Lee, Juhyun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.5
    • /
    • pp.455-461
    • /
    • 2017
  • The Hebei Spirit oil spill incident occurred in December 7, 2007 and caused approximately $12,547k{\ell}$ of crude oil spillage along 370km off the west coast of Korea. Due to the astronomical and irrecoverable damage to the marine ecosystems and the overall living standards of the residents, the oil spill incident has been notoriously named as the "worst oil spill incident" occurred in Korea. Nevertheless, though almost a decade has passed since the tragic incident in Korea, it appears that compensation and recovery efforts seem not close to satisfaction and the local residents are still struggling with various negative impacts incurred by the incident because of critical cleavage among the interests of the relevant parties to the incident. In this paper, the analysis of Hebei Spirit oil spill incident regarding two aspects was carried out; First, meticulously analyze the practical and statistical data of the incident to precisely examine the fundamental causes for its occurrence to further prevent the reoccurrence of such disastrous incident; and the second, comprehensively inspect reasons for the protracted and inefficient damage recovery and victim-oriented compensation. To be specific, this study observed the levels of compensation against damages from the incident, and the adequacy of it in terms of ultimately and inclusively addressing financial, social and ecological aspects based primarily upon the legal verdicts, and statistical and empirical surveys.

Application Specific Processor Design for H.264 Decoder with a Configurable Embedded Processor

  • Han, Jin-Ho;Lee, Mi-Young;Bae, Young-Hwan;Cho, Han-Jin
    • ETRI Journal
    • /
    • v.27 no.5
    • /
    • pp.491-496
    • /
    • 2005
  • An application specific processor for an H.264 decoder with a configurable embedded processor is designed in this research. The motion compensation, inverse integer transform, inverse quantization, and entropy decoding algorithm of H.264 decoder software are optimized. We improved the performance of the processor with instruction-level hardware optimization, which is tailored to configurable embedded processor architecture. The optimized instructions for video processing can be used in other video compression standards such as MPEG 1, 2, and 4. A significant performance improvement is achieved with high flexibility. Experimental results show that we could achieve 300% performance for the H.264 baseline profile level 2 decoder.

  • PDF

Indian Railways: Recent Trends in Control Accidents and Safety Measures for Passengers

  • Kumar, Katta Ashok
    • East Asian Journal of Business Economics (EAJBE)
    • /
    • v.2 no.4
    • /
    • pp.48-55
    • /
    • 2014
  • Indian railways has been regularly in the news albeit for the wrong reasons. The frequency with which train accidents have been taking place has led to serious doubts in the public mind about the safety of rail travel and also the health of the network. Against this background, an attempt is made in this paper to assess the trends in railway accidents for the period from 2000-01 to 2009-10. The paper also highlighted the various measures taken by IR to prevent accidents to ensure safety to the public.

A Study on the Harmonic Analysis of an Electronic Ballast (전자식 안정기의 고조파 저감 대책)

  • Choi, Hong-Kyu;Hong, Sun-Suk;Oh, Jung-Suk;Yoo, Tae-Kun
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2004.11a
    • /
    • pp.121-127
    • /
    • 2004
  • Electric ballast is widely used to turn on the fluorescent. Electric ballast measure occurrence of harmonic through the actual measurement and it is simulated by modeling equivalent circuit for harmonic analysis. The purpose of this paper is to give an equivalent circuit modeling methodology for the harmonic currents generated by single-phase personal computer loads to evaluate a commercially available series resonant filter for the harmonic currents compensation based on the IEC std 61000-3-2 and IEEE 519 standards for limiting harmonic distortion.

  • PDF

Real Time Implementation of Active Power Filters for Harmonic Suppression and Reactive Power Compensation using dSPACE DS1104

  • Kumar, Seethapathy;Umamaheswari, B.
    • Journal of Electrical Engineering and Technology
    • /
    • v.3 no.3
    • /
    • pp.373-378
    • /
    • 2008
  • In this paper, an Active Power Filter (APF) is implemented using a dSPACE DS1104 processor to compensate harmonics and reactive power produced by nonlinear load. The reference source current is computed based on the measurement of harmonics in the supply voltage and load current. A hysteresis based current controller has been implemented in a DSP processor for injecting the compensating current into the power system, so that APF allows suppression of the harmonics and reactive power component of load current, resulting in a supply current that is purely sinusoidal. Simulation and experimental results of the proposed APF to meet the IEEE-519 standards are presented.

On the Control of Re-Structured Electric Power Systems

  • Feliachi Ali
    • International Journal of Control, Automation, and Systems
    • /
    • v.3 no.spc2
    • /
    • pp.363-375
    • /
    • 2005
  • The paper describes some of the challenges that face the control of nonlinear interconnected power systems. The challenges include the selection of appropriate control and information structures that could range from a completely decentralized to a fully centralized structure. Once a structure is proven to be feasible, the effectiveness of control signals needs to be assessed. Analytical tools are derived for this purpose in the first part of the paper, and they are illustrated with a case study that involves the design of a damping decentralized controller using a Thyristor Controlled Series Compensation device. The second part of the paper deals with the load following and tracking problem through automatic generation control for a system that has been re-structured or deregulated. This problem can be solved using a completely decentralized scheme. It is solved here using fuzzy rules and with an emphasis on compliance with NERC's standards and reduction of wear and tear of the equipment. It is illustrated with a test system that has three interconnected control areas. Finally, comments on the economics of control and the author's vision are presented.

Analysis of regulatory action for environmental protection in International Commerce (국제교역에 있어 환경보호를 위한 규제조치의 내용 분석)

  • Lee, Jae-Young
    • International Commerce and Information Review
    • /
    • v.11 no.1
    • /
    • pp.379-403
    • /
    • 2009
  • The Purpose of this study is to research the problems of trade restriction for an environment protection. Environmental regulation relate to trade are Convention on International Trade in Endangered Species of Wild Fauna & Flora, Montreal Protocol on Substances that Deplete the Ozone Layer, Kyoto Protocol to the UN Framework Convention on Climate Change, Basel Convention on the Control of Transboundary Movements of Hazardous Wastes & Their Disposal, Cartagena Protocol on Biosafty and WTO Agreement. Regulatory action for environmental protection has economics instrument, command & control, liablity, damage compensation, voluntary agreement. In the case of our country, impact of regulatory action for environmental protection is low. Because is recognized position of developing country yet. For in the balance rules of trade and enviroment, First must satisfy WTO's basic principles and principle of quantitative restrictions prohibition, Second, operation of protection action must reasonable and objective standards Third, must satisfy GATT article 20 (b) clause and (g) protestation each essential factor To grow for environment advanced country, we should do i) using of FTA ii) international cooperation strengthening for developing country position iii) construction of environment information network

  • PDF

Measurement and Compensation of Nonlinearity in Homodyne Interferometer (Homodyne 간섭계에서의 비선형성 측정과 보정)

  • Kim, Jong-Yun;Eom, Tae-Bong;Jeong, Kyu-Won;Choi, Tae-Young;Lee, Keon-Hee
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.18 no.9
    • /
    • pp.171-178
    • /
    • 2001
  • The nonlinearity of a laser interferometer usually ranges from sub-nanometer to several manometers. This nonlinearity, which has periodic characteristics, limits the accuracy of the interferometer at the sub-nanometer level. The nonlinearity error of the one-frequency homodyne interferometer with quadrature fringe detection results from a number of factors including polarization mixing by imperfect optical elements, unequal gain of photo detectors, lack of quadrature between two signals and misalignment. In this paper, we described a method for measuring and compensating the nonlinearity of homodyne interferometer using the elliptical fitting technique with least-square method. Experimental results demonstrate that $^\pm$3.5 nm nonlinearity can be reduced to $^\pm$0.2 nm level.

  • PDF

A Study on the Hormonic Analysis of on Electronic Ballast (전자식 안정기의 고조파 저감 대책)

  • Hong, Soon-Seuk;Oh, Jung-Suk;Yoo, Tae-Kun
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.19 no.2
    • /
    • pp.35-41
    • /
    • 2005
  • Electric ballast is widely used to turn on the fluorescent. Electric ballast measure occurrence of harmonic through the actual measurement and it is simulated by modeling equivalent circuit for harmonic analysis. The purpose of this paper is to give an equivalent circuit modeling methodology for the harmonic currents generated by single-phase loads to evaluate a commercially available series resonant filter for the harmonic currents compensation based on the IEC 61000-3-2 and IEEE Std 519-1992 standards for limiting harmonic distortion.

The study on the characteristics of operating limit of low voltage electric machine under the effects of voltage quality (순간전압품질이 저압 전기기기 운전한계에 미치는 특성연구)

  • Park, In-Deok;Jeong, Sung-Won;Gim, Jae-Hyeon;Lee, Geun-Joon
    • Proceedings of the KIPE Conference
    • /
    • 2007.07a
    • /
    • pp.95-97
    • /
    • 2007
  • This paper studies on operating limit curve of low voltage electric machinery with respect to source voltage variation or sag. Also, it discusses electric machine and compensation equipment design methodology based on voltage quality effect assessment technology. Voltage quality standards, such as SEMI47, CBEMA, ITIC curve are regarded to examine the relation between time constants of load and sagging time of sag generator, the load(low voltage electric machinery) study. Voltage sag characteristics of loads, time constant and sag relation voltage-time operating limits are tested and verified.

  • PDF