• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.876-878
• /
• 2008

The standards of acceptable limit and compensation is one of the most important things in environmental noise and vibration disputes resolution. In this paper, review on the present acceptable limit level and compensation standard in National Environmental Dispute Resolution Commission is introduced. Discordance of standards between in the regulation law and in the dispute resolution commission and it's improvement are discussed. Abnormal reasoning for compensation standards is pointed out from a author's private view.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.67-79
• /
• 1996

This paper presents a composite luminance signal processing system for NTSC, PAL and SECAM standards. Eaxh of the three standards employs its own specifications of subcarmier bandwidth and luminance signal waveform. The proposed system, compatible to the specifications of the three standard and B/W TV, implements variable freqneucy characteristics by controlling filter coefficients. The major features of the system are a luminance/chroma separation unit and an aperture compensation unit. The luminance/chroma separation unit employes a notch filter selection a trap freqneyc to atenuate unwanted color signals in luminance signal bands. The aperture compensation unit comprises two subunits, to provide clear color definition for each of the three standards: a primary compensation circuit and a variable compensation circuits. The proposed system yields a 40 dB gain from the chroma/luminance separation and a 10 dB gain from the aperture compensation unit.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권1호
• /
• pp.25-31
• /
• 2015

In this paper, we described the timing-offset comparison results between various daily jump compensation methods for GPS carrier phase (CP) measurement data. For the performance comparison, we used about 70 days GPS measurement data obtained from two GPS geodetic receivers which share the reference 1 PPS and RF signals and closely located in each other within a few meters. From the experiment results, the followings were observed. First, daily jumps existed in CP measurements depend on not only the environment but also the receiver which will make a full compensation be very hard or impossible. Second, clock bias can be occurred in the case of using a simple compensation with accumulation of daily jumps but it could be used in a short-period frequency comparison campaign (less than about 7 days) despite of its drawback.

• 산학경영연구
• /
• 제22권1호
• /
• pp.27-44
• /
• 2009

This paper compares the accounting standards for stock option of Japan and Korea. Especially, tire setting process of accounting standards for stock option, accounting methods and disclosures for stock option in two countries are analyzed. The results provide that two countries shaw different characteristics in accounting standards for stock option. First, in Japan, acquired services are reported as compensation costs and capital adjustments. On the other hand, in Korea, in case of cash-settled share- based payment transactions, acquired services are reported as compensation costs and capital adjustments, but in case of equity-settled share- based payment transactions, acquired services are reported as compensation costs and debt. Second, when tire stock option rights are abandoned, they are reported as extraordinary items in Japan and are reported as other surplus in Korea. Third, though both countries do not choose specific stock option pricing model, Japan prefers Black-Sholes Model and Korea regards binomial model as proper model.

• 센서학회지
• /
• 제13권6호
• /
• pp.405-410
• /
• 2004

Compensation wires for Pt/Pd thermocouple was manufactured using Cu/Ni alloys. Their thermoelectric voltage has been tested from room temperature to about $150^{\circ}C$. Alloys of $Cu_{95.5}Ni_{4.5}$ and $Cu_{89.5}Ni_{10.5}$ introduced only small emf differences to Pt/Pd thermocouples, indicating a real possibility of industrial use. Above $1000^{\circ}C$, the temperature difference was expected to he small as ${\pm}0.5^{\circ}C$, and the difference would be minimized by adjusting the Ni content with a small amount.

• Journal of Radiation Protection and Research
• /
• 제9권1호
• /
• pp.11-18
• /
• 1984

Well type 전리함과 미세전류 측정희로를 사용하여 표준 감마선 전리함 장치를 개발하였다. 미세전류는 automatic Townsend balance with stepwise compensation방법을 사용하여 측정하였다. $^{226}Ra$을 기준 선원으로 택하여 감마 방출핵종인 $^{241}Am,\;^{133}Ba,\;^{60}Co,\;^{134}Cs,\;^{137}Cs^{22}Na$에 대한 비교 교정인자를 산출하였으며, 감마에너지의 함수로서 검출 효율 곡선을 구하였다.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.61-72
• /
• 2010

Judgment of cerebral and cardiovascular diseases arising out of duty follows the legal judgment method for the purpose of investigation of medical causes based on the Industrial Accident Compensation Insurance Act, with the characteristics of the occurrence as personal factors etc. act as risk factors while work-related ones as triggers, in the case of disease due to occupational cases, as whether it arose out of duty must be judged including even the individual's personal risk factors, there are limitations securing fairness even with existing laws, regulations and guidelines. This study was carried out to suggest basic data for the preparation of standardized guidances for diseases arising out of duty by reviewing the standards for the acknowledgment of cerebral and cardiovascular diseases due to occupational cases, and it has a significance in that it suggests target diseases that may be judged as cerebral and cardiovascular diseases, legal criteria for the acknowledgment and standards for the judgment of cerebral and cardiovascular diseases arising out of duty.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.658-664
• /
• 2015

Lens designers generally refer to flat image fields and attempt to minimize the field curvature. Present-day CMOS image sensors for mobile phone cameras, however, are not flat, but curved. Sometimes it is necessary to generate an intentional field curvature according to the degree and direction of the CMOS image-sensor’s curvature. This paper presents the degree of curvature of a CMOS image sensor measured using an interferometer, and proposes an effective compensation method that minimizes the net field curvature through optimizing the air gap between lens elements, which is demonstrated using simulations and experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.95-97
• /
• 2018

The power quality of Single Phase Grid-Connected Inverters (GCIs) has received much attention with the increasing number of Distributed Generation (DG) systems. However, the performance of single phase GCIs get degraded due to several factors such as the grid voltage harmonics, the dead time effect, and the turn ON/OFF of the switches, which causes the harmonics at the output of GCIs. Therefore, it is not easy to satisfy the harmonic standards such as IEEE 519 and P1547 without the help of harmonic compensator. To meet the harmonic standards a certain kind of harmonic controller needs to be added to the current control loop to effectively mitigate the low order harmonics. In this paper, the harmonic compensation is performed using a novel robust harmonic compensation method based on Digital Lock-in Amplifier (DLA). In the proposed technique, DLAs are used to extract the amplitude and phase information of the harmonics from the output current and compensate it by using a simple PI controller in the feedforward manner. In order to show the superior performance of the proposed harmonic compensation technique, it is compared with those of conventional harmonic compensation methods in terms of the effectiveness of harmonic elimination, complexity, and implementation. The validity of the proposed harmonic compensation techniques for the single phase GCIs is verified through the experimental results with a 5kW single phase GCI. Index Terms -Single Phase Grid Connected Inverter (SPGCI), Harmonic Compensation Method, Total Harmonic Distortion (THD) and Harmonic Standard.

• 대한안전경영과학회지
• /
• 제24권2호
• /
• pp.77-85
• /
• 2022

This study tried to suggest a systematic improvement plan to prepare a civil safety insurance operation and management system by reviewing the operation and management status of civil safety insurance, which is operated and managed by each local government autonomously. In this study, the problems of the current civil safety insurance were analyzed by dividing them into the lack of systematic management of insurance items, overlapping coverage between insurance items, and deviations in compensation limits. As a systematic improvement plan, it was suggested to secure the systemic management of guarantee items, standardize compensation standards, prepare an integrated operation and management system, and provide financial support for local governments with poor financial independence. Since the problems and improvement plans for the civil safety insurance analyzed as described above are formed by exchanging and receiving a complex mutual influence, the institutional improvement plan for the operation and management system of the civil safety insurance is not only a specific part of the study, but also comprehensively current citizens. Based on the results derived from the analysis of safety insurance, it is concluded that alternatives must be found.