• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2004

We have performed computer simulation and experiment to obtain electro-optic characteristics of reflective hybrid aligned nematic (R-HAN) cell driven by fringe field, in which the cell consists of polarizer, optical compensation film, LC layer and reflector. Conventional R-HAN cell driven by fringe field using only the LC layer shows high wavelength dispersion at dark-state and thus viewing angle characteristic is strongly wavelength-dependent. In order to improve this demerit, we added one optical compensation film to conventional R-HAN cell. The display with optimized cell parameters shows low wavelength dispersion at dark-state and exhibits a wide viewing angle without the occurrence of grey scale inversion over a wide range of viewing angles and the contrast ratio greater than 5 over exists about 120$^{\circ}$ in vortical direction and 160$^{\circ}$in horizontal direction. Experimental results show good agreements with theoretical results and fast response time.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.3-8
• /
• 2000

We have developed a high performance vertical alignment TFT-LCD (Thin Film Transistor Liquid Crystal Display), that shows a high light transmittance, and wide viewing angle characteristics with an unusually high contrast ratio. In order to optimize the electro-optical properties we have studied the effect of cell parameters, multi-domain structure and retardation film compensation. With the optimized cell parameters and process conditions, we have achieved a 24" wide UXGA TFTLCD monitor (16:10 aspect ratio 1920X1200) showing a contrast ratio of over 500:1, panel transmittance near 4.5%, response time near 25 ms, and viewing angle higher than 80 degree in all directions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.683-686
• /
• 2006

Accompanied by the demand of thin type TV, the application of the TFT LCD display device is more and more extensive. The key material which influences the optical performance of the TFT LCD is optical film. Due to the rapid development of the big size TFT LCD for the recent years, the supply has been unable to meet the demand for its relative material. Therefore, we bring up a alternate choice-the hybrid compensation film which could not only show well optical performance, but also lessen the quantity of usage in TAC in order to make the optical film free of shortage.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.545-551
• /
• 1996

Water-vapor transmission rate and water-vapor permeability of carrageenan-based edible film with three different thicknesses of 0.05, 0.08 and 0.11 mm were measured to investigate the potential applicability of the films to powder foods at five different temperatures (20, 25, 30. 35 and $4^{\circ}C$) and three different relative humidities (50. 70 and 90% RH). Water-vapor transmission rate of the carrageenan-based film was gound to be 2.3 times higher than that of polyethylene (PE) film and water-vapor permeability of the film was 45-230 times higher than that of PE film. Water-ydpor permeability of the film seemed to increase linearly with the film thicknees like other hydrophilic edible films. Water-vapor transmission rate were found to be dependent on the temperature. Activation energies of the water-vapor transmission rate of the film were found to be between 7.898 and 12.8702 kj/mol depending on the film thickness. The water-vapor transmission rate of the film showed the typical kinetic compensation effect between activation energies and preexponential factors. which was proved by the linear increase in the value of logarithms of preecponential factor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.294-295
• /
• 2006

Field sequential liquid crystal display (FSLCD) has advantages such as a high transmittance due to no use of color filter and high color reproductivity because of LED backlight for a luminance source. However, to realize FSLCD response time of the LCD must be below 5ms. In this paper, we have chosen electrically controlled birefringence (ECB) mode for this application and studied film compensation to improve the operating voltage and viewing angle and to achieve a fast response time optimizing the condition of the discotic film and TAC film, operating voltage decreases to 5V, and viewing angle range is $160^{\circ}$ at horizontal and vertical direction, respectively and $120^{\circ}$ in diagonal direction. (contrast ratio > 10:1) and optimized cell exhibits a fast response time of 4ms in most grey levels.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.16-22
• /
• 2012

In this paper, we present spiral pattern which suits for optical simulator to calibrate fisheye lens and compensate geometric distortion. Using spiral pattern, we present calibration without mathematical modeling in advance. Proposed spiral pattern used to input image of optical simulator. Using fisheye lens image, we calibrate a fisheye lens by matching geometrically moved dots to corresponding original dots which leads not to need mathematical modeling. Proposed algorithm calibrates using dot matching which matches spiral pattern image dot to distorted image dot. And this algorithm does not need modeling in advance so it is effective. Proposed algorithm is enabled at processing of pattern recognition which has to get the exact information using fisheye lens for digital zooming. And this makes possible at compensation of geometric distortion and calibration of fisheye lens image applying in various image processing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.991-994
• /
• 2005

We have successfully commercialized a novel optical compensation film, OCB-WV film, for OCB-LCD-TVs which has fast response time and wide viewing angle. The OCB-WV film consists of a 45degree-aligned discotic layer and a high Rth biaxial TAC film, which is suited for a roll-to-roll polarizer manufacturing process. This OCB-WV has brought out the excellent features that OCB intrinsically has, making nextgeneration fast-response LCD-TVs possible and free from image blurring in conjunction with an impulsive driving scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.809-813
• /
• 2006

We have studied the optical properties of the biaxial film such as fast axis, retardance and the change of polarization state between crossed polarizer using dual rotating retarder polarimeter. We have developed a novel simulation model, which could explain well the experimental results, and found that it could be used to optimize the compensation film in LCD for improving wide-viewing property.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.4
• /
• pp.7-9
• /
• 2003

Viewing angle characteristics of a nematic liquid crystal (NLC) using a in-plane driven (IPD) vertical alignment (VA) cell without a negative compensation film on a homeotropic alignment layer were studied. Good voltage-transmittance (V - T) curves were obtained using the rubbing aligned IPD- VA cell. However, instability and low transmittances of V - T characteristics in photo aligned IPD- VA cell was measured. The EO performance of a rubbingaligned IPD- VA cell without a negative compensation film was wider than that of photoaligned IPD- VA cell and conventional VA cell. Also, the fabrication processes using the rubbing aligned IPD- VA cell mode be carried out with only one-sided rubbing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.9-10
• /
• 2000

The wide viewing angle and fast response time characteristics of negative dielectric anisotropy nematic liquid crystal (NLC) using a novel vertical-alignment (VA) - 1/4 ${\pi}$ cell mode on a homeotropic alignment layer were investigated. Good voltage-transmittance curves and low driving voltage using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film were obtained. The iso-viewing angle characteristics of NLC using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film can be achieved. The fast response time of 24.4 ms in NLC was successfully measured. The iso-viewing angle, fast response time, and low driving voltage characteristics using the novel VA - 1/4 ${\pi}$ cell mode can be achieved.