• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1621-1628
• /
• 2016

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.470-473
• /
• 2018

고차변조방식을 사용하는 광대역 시스템은 무선채널환경의 변화뿐만 아니라 baseband 신호가 RF 장비를 통과하면서 발생할 수 있는 평탄도(Ripple) 특성 변화에 민감하다. 따라서 평탄도 특성 변화를 최소화 할 수 있는 설계와 RF 튜닝이 필요하지만 시스템 구현이 어렵고 많은 시간이 소요된다. 본 논문에서는 baseband 신호가 RF 송수신 장비를 거치면서 왜곡되는 고정적인 평탄도 특성을 분석하여 보상 필터의 계수(Coefficient) 값을 추출하고 수신부에서 보상 필터로 보상을 하는 기능을 256TCM(Trellis Coded Modulation) 방식으로 구현하였다. 또한 시스템에 적용하여 시험한 결과 RF 송수신 장비의 평탄도 특성이 좋지 않은 주파수대역에서 디지털 보상필터를 적용하여 SNR 및 수신감도의 개선이 있음을 확인하였다.

• 자원환경지질
• /
• 제51권1호
• /
• pp.39-48
• /
• 2018

밀도가 다른 4개의 실험공에서 2007년부터 2011년까지 수행한 이격보정 실험 자료를 이용하여 가장 효과적인 보정 차트를 알기 위해 연구를 수행하였다. 먼저 선원의 불규칙적인 붕괴특성을 파악하고 비이상적인 감마반응을 잘라내는 방법으로 이격보정 자료의 효과를 높였다. 수정된 이격보정 자료로부터 검출기 조합별, 시추공 밀도별, 이격보정 기법별 효과를 분석하였다. 그 결과 통상적으로 사용해 온 LSD-SSD 조합보다 LSD-MSD 조합이 이격보정에 더 적합하며, 지하수위면 하부에 위치한 토양층이나 풍화대의 이격보정에서는 큰 오차를 피하면서 이격보정이 가능한 것으로 나타났다. 일반 이격보정에 비해 밀도형 이격보정에서 오차의 규모가 전반적으로 높게 나타났으나 지하수면 하부에 있는 풍화대나 토양층을 대상으로 하는 이격보정에서는 충분히 밀도형 이격보정이 효과적인 것으로 나타났다.

• 한국통신학회논문지
• /
• 제30권7A호
• /
• pp.542-549
• /
• 2005

In this paper, the optimal pump light power of optical phase conjugator (OPC) and the compensation characteristics of distorted WDM channel signals are numerically investigated, when the OPC with highly-nonlinear dispersion shifted fiber (HNL-DSF) not be placed at the mid-way of total transmission length. The total dispersion of former half section and latter half section is assumed to be same each other in this approach. It is confirmed that, in WDM transmission systems with OPC deviated from the mid-way, the pump light power for best compensation must be flexible selected depending on the OPC position. This optimal pump light power is gradually increased as the OPC is gradually closer to the receiver. Consequently, it is possible to establish the compensation system independent on the OPC position by setting optimal pump light power connected with the OPC position.

• 소성∙가공
• /
• 제16권1호
• /
• pp.15-19
• /
• 2007

This paper presents an integrated machining error compensation method based on captured images of tool deflection shapes in flat end-milling processes. This approach allows us to avoid modeling machining characteristics (cutting forces, tool deflections and machining errors etc.) and accumulating calculation errors induced by several simulations. For this, a high-speed camera captured images of real deformed tool shapes which were cutting under given machining conditions. Using image processes and a machining error model, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool paths. This corrected tool path can effectively reduce machining errors in the flat end-milling process. Experiments are carried out to validate the approaches proposed in this paper. The proposed error compensation method can be effectively implemented in a real machining situation, producing much smaller errors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.283-283
• /
• 2000

In this paper, we deals with a decentralized control scheme with input compensation form for gantry crane systems. By considering the gantry crane's characteristics, the system is decentralized into two subsystems such as the travelling and sway subsystem, and the hoisting subsystem. For decentralizing the system, a simple algorithm is proposed using observability canonical form. The decentralized subsystems include unknown input which coupled with other subsystems and actuator failures. These unknown input and actuator failures are estimated by using PI observation techniques and those estimated values are used to construct an input compensation form. Lastly, the proposed decentralized control scheme far the gantry crane systems is verified by crane simulation.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.281-287
• /
• 2001

In this paper, we deal with a decentralized control scheme with input compensation form for gantry crane systems. By considering the gantry cranes characteristics, the system is decentralized into two subsystems, the travelling and swaying subsystem and the hoisting subsystem. For decentralizing the system, a simple algorithm is proposed using the observability canonical form. The decentralized subsystems include unknown inputs that one coupled with other subsystems and actuator failures. These unknown input and actuator failures are estimated by using PI observation techniques. And those estimated values are used to construct an input compensation form. Finally, the proposed decentralized control scheme for the gantry crane systems is verified by crane simulation.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.484-492
• /
• 2000

본 논문에서는 고조파전류 보상기능을 갖는 전압 보상기에 관한 연구를 수행하고 그 보상 특성을 해석하였다. 제안된 보상시스템은 하이브리드형 능동전력필터에서와 같이 LC로 구성되어 전력선에 병렬로 연결되는 수동필터와 직렬 변압기를 사용하여 전력선에 직렬로 연결되는 PWM 컨버터를 동시에 사용하는 회로구조를 갖는다. 제안된 보상시스템을 통해 다이오드 정류기와 같은 비선형 부하로 인해 발생되는 고조파 전류의 보상 및 전원 이상 현상으로 발생되는 전원측 이상 전압의 보상을 모두 수행한다. 단상 등가회로를 통해 보상시스템의 동작 원리를 설명하고 d-q 동기좌표계 축 상에서 보상시스템의 모든 제어를 수행하는 제어 알고리즘의 개발을 수행하였으며 실험을 통해 제안된 보상시스템의 보상특성을 확인하였다.

• 동서간호학연구지
• /
• 제21권1호
• /
• pp.61-68
• /
• 2015

Purpose: This study was conducted to analyze the annual trends and characteristics of work-related mental disorders including suicide among Korean workers. Methods: Employing the Industrial Accident Compensation Insurance (IACI) data collected by the Korea Worker's Compensation & Welfare Service, we analyzed total work-related mental disorders and suicide cases (n=455) claimed to IACI from 2008 to 2012. We paid a special attention to workers' socioeconomic status and occupational characteristics. Results: The number of injured workers and industrial accident rate decreased during the study period, whereas the case of work-related mental disorders showed significant increase. Mental disorders cases were more prevalent in workers who were male, aged the 40s, and engaged in finance, as well as with 1-5 years of working duration than their respective counterparts. Increasing trend of suicide cases was statistically significant by the Cochran-Mantel-Haenszel test (p=.002). Conclusion: This study suggests that work-related mental disorder management strategy and system should be established.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권1호
• /
• pp.27-33
• /
• 1999

Compact fluorescent lamps are very sensitive to the variation of ambient temperature. This paper investigates the temperature characteristics of a 15[W] compact fluorescent lamp, and compensates the variation of light output by frequency control of its electronic ballast. Circuit parameters for the inverter of the electronic ballast are obtained by analyzing the R-L-C equivalent circuit for the inverter and the lamp. The optimum ratio of the two capacitance($C_1$/$C_2$), which are connected with the lamp in series and in parallel, respectively, is determined which consideration of the temperature variation within a range of 10~35[$^{\circ}C$]. As a result a value of 10 for the ratio is obtained at an operating frequency of 57[kHz], and with this value the frequency control works well for temperature compensation. Its validity is verified by investigating light output stabilization characteristics resulting from frequency control of the lamp at various temperatures.