• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.235-239
• /
• 2012

This paper presents frequency response compensation technique, and a self-oscillation circuit for capacitive microresonator with the compensation technique using programmable capacitor array, to compensate for the frequency response distorted by parasitic capacitances, and to obtain stable oscillation condition. The parasitic capacitances between the actuation input port and capacitive output port distort the frequency response of the microresonator. The distorted non-ideal frequency response can be compensated using two programmable capacitor arrays, which are connected between anti-phased actuation input port and capacitive output port. The simulation model includes the whole microresonator system, which consists of mechanical structure, transimpedance amplifier with automatic gain control, actuation driver and compensation circuit. The compensation operation and oscillation output of the system is verified with the simulation results.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.191-194
• /
• 2001

In this paper, we propose a series active power filter control method to compensate current harmonics and unbalanced source voltage. The system is composed of series active power filter and shunt passive filer that are tuned 5th and 7th harmonics. In this conventional system, series active power filter complements drawbacks of the shunt passive filter, namely improves harmonic compensation characteristics, and compensates unbalanced source voltage. In the proposed algorithm, compensation voltage for harmonic reduction is calculated by performance function, and compensation voltage for unbalanced source voltage is calculated in based on a synchronous reference frame. So, ultimate compensation voltage is sum of those two compensation voltages. By computer simulation, we verify the excellency of proposed method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.101-107
• /
• 2009

This paper deal with development of on-line type voltage sag compensation system using supercapacitor EDLC to solve the voltage sag problems which are considered to be dominant disturbances affecting the power quality. With the wide use of semiconductor devices in electrical equipment, modem-type loads are becoming increasingly sensitive to the voltage sags and the disturbances prove to be costly to industries. Supercapacitor EDLC is employed to compensate dynamically for the voltage sag of system with sensitive loads. This capacitor has higher energy density than the electrolytic capacitor. Also, this capacitor has a lot of advantage such as no maintenance, longer life cycle and faster charge-discharge time than the battery system. Therefore, in this paper, the energy design scheme of supercapacitor and the configuration technique of on-line type voltage sag compensation systems are newly introduced. According to the results of experimental of prototype 5[kVA] system, it is verified that the developed system has effectiveness of voltage sag compensation by using a supercapacitor EDLC.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.719-728
• /
• 2013

A novel hybrid active power filter (NHAPF) that can be adopted in high-voltage systems is proposed in this paper. The topological structure and filtering principle of the compensating system is provided and analyzed, respectively. Different controlling strategies are also presented to select the suitable strategy for the compensation system. Based on the selected strategy, the harmonic suppression function is used to analyze the influence of system parameters on the compensating system with MATLAB. Moreover, parameters in the injection branch are designed and analyzed. The performance of the proposed NHAPF in harmonic suppression and reactive power compensation is simulated with PSim. Thereafter, the overall control method is proposed. Simulation analysis and real experiments show that the proposed NHAPF exhibits good harmonic suppression and reactive power compensation. The proposed compensated system is based on the three-phase four-switch inverter, which is inexpensive, and the control method is verified for validity and effectiveness.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.199-208
• /
• 2012

This paper proposes a quasi Z-source DVR(Dynamic Voltage Restorer) system with a series connection of the output terminals, to compensate the voltage variations in the 6.6[kV]/60[Hz] power distribution system. The conventional DVR using one quasi Z-source AC-AC converter has the advantage which it can compensate the voltage variations without the need for the additional energy storage device such as a battery, but it is impossible to compensate for the 50[%] under voltage sags. To solve this problem, a DVR system using two quasi Z-source AC-AC converters with the series connection of the output terminals is proposed. By controlling the duty ratio D in the buck-boost mode, the proposed system can control the compensation voltage. For case verification of the proposed system, PSIM simulation is achieved. As a result, in case that the voltage sags-swells occur 10[%], 20[%], 60[%] in power distribution system, and, in case that the 50[%] under voltage sags-swells continuously occur, all case could compensate by the proposed system. Especially, the compensated voltage THD was examined under the condition of the 10[%]~50[%] voltage sags and the 20[${\Omega}$]~100[${\Omega}$] load changes. The compensated voltage THD was worse for the higher load resistances and more severe voltage sags. Finally, In case of the voltage swells compensation, the compensation factor has approached nearly 1 regardless of the load resistance changes, while the compensation factor of voltage sags was related to the load variations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.199-206
• /
• 2017

Environmental noise can degrade the performance of speech recognition system. This paper presents a procedure for performing cepstrum based feature compensation to make recognition system robust to noise. The approach is based on direct compensation of spectral tilt to remove effects of additive noise. The noise compensation scheme operates in the cepstral domain by means of calculating spectral tilt of the log power spectrum. Spectral compensation is applied in combination with SNR-dependent cepstral mean compensation. Experimental results, in the presence of white Gaussian noise, subway noise and car noise, show that the proposed compensation method achieves substantial improvements in recognition accuracy at various SNR's.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.72-79
• /
• 2003

We proposed a noble algorithm using DOP (degree of polarization) not only as feedback signal but alto as feed-forward signal for the compensation of higher-order PMD effect. In the proposed algorithm, DOP after the first-order PMD compensation is considered as the indicator of the amount of residual higher-order PMD. This algorithm has the merit that DOF (degree of freedom) of the system can be limited to the level of the first-order PMD compensation system. Owing to the limited DOF, the reliability of the system can be enhanced and the complexity of the implementation can be degraded. For the analysis of the algorithm, we simulated the 10Gbps NRZ transmission system and obtained the result that the system outage probability can be reduced as much as three times with respect to the only first-order PMD compensation case.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.114-122
• /
• 2014

Sensor fusion is the one of the main research topics. It offers the highly reliable estimation of vehicle movement by processing and mixing several sensor outputs. But unfortunately, every sensor has drift which degrades the performance of sensor. It means a single degraded sensor output may affect whole sensor fusion system. Drift in most research is ideally assumed to be zero because it's usually a nonlinear model and has sample variation. Plus, it's very difficult for the acceleration to separate drift from the output signal since it contains many contributors such as vehicle acceleration, slope angle, pitch angle, surface condition and so on. In this paper, modified spline interpolation is introduced as a dynamic temperature compensation method covering sample variation. Using the last known output and the first initial output is suggested to build and update compensation factor. When the system has more compensation data, the system will have better performance of compensated output because of the regression compensation model. The performance of the dynamic temperature compensation system is evaluated by measuring offset drift between with and without the compensation.

• Journal of Arbitration Studies
• /
• v.28 no.4
• /
• pp.43-59
• /
• 2018

This study aims to review various efforts required by medical institutions to prevent medical accidents in advance and to suggest the necessity of introducing liability insurance for medical accidents based on cases abroad and compulsory professional indemnity insurance at home. Over the past five years between 2013 and 2017, the number of inquiries regarding medical accidents and medical disputes has increased by 11.1 percent from 36,099 to 54,929, and the number of mediation and arbitration for medical disputes has increased by 14.3 percent from 1,304 to 2,225. Since some medical accidents even cause social problems, a compulsory insurance system for the liability of medical institutions for damages need to be introduced to promptly compensate the victims of medical accidents and to ensure compensation by medical personnel. In Korea, a system is in place to provide compensation for a client who suffers an accidental damage after receiving professional services, regardless of whether or not the professional service provider can provide compensation. In major foreign countries, a medical liability system is in place that is applied either by the principle of liability with fault, or the principle of liability without fault. In this study, the cases of compulsory insurance and semi-compulsory insurance in the US and Japan to which the principle of liability with fault is applied, as well as the case of New Zealand to which the principle of liability without fault is applied, were examined. It is necessary to urgently introduce the compulsory insurance system for the liability of compensation to prevent medical disputes and to compensate for the life and physical damages of the victims of medical accidents in domestic medical institutions. Doing so is expected to ensure fair compensation for the victims of medical malpractice and compensation by medical personnel, thereby improving medical practice.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.243-251
• /
• 2020

The purpose of the study is to explore the relationship between the type of reporting weaknesses in the Internal Accounting Control System and executive compensation, and then analyze whether such relevance varies depending on the characteristics of governance structure. The analysis data used 6,343 KOSPI&KOSDAQ companies excluding the financial industry from 2011 to 2016. As a results of the study, First, executive compensation decreased in companies reporting the weaknesses of CL. Second, this relevance was further strengthened according to the governance structure. This study confirms that information on the operation results of system is an important factor in determining manager compensation. It implies that it is necessary to study reasonable compensation policies and governance structures suitable for companies. If an internal control system that affects executive compensation is added, the basis for stronger support of the research results can be prepared.