• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.88-93
• /
• 2017

Due to the requirement of the development of the precision manufacturing industry, the accuracy of machine tools has become a key issue in this field. A critical factor that affects the accuracy of machine tools is the feed system, which is generally driven by a ball screw. Basically, to improve the performance of the feed drive system, which will be thermally extended lengthwise by continuous usage, a thermal error compensation system that is highly dependent on the feedback temperature or positioning data is employed in the machine tool system. Due to the overdependence on measuring technology, the cost of the compensation system and low productivity level are inevitable problems in the machine tool industry. This paper presents a novel feed drive thermal error compensation system method that could compensate for thermal error without positioning or temperature feedback. Regarding this thermal error compensation system, the heat generation of components, principal of compensation, thermal model, mathematic model, and calculation method are discussed. As a result, the test data confirm the correctness of the developed feed drive thermal error compensation system very well.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.437-446
• /
• 2006

Laser vision inspection systems are becoming popular for automated inspection of manufactured components. The performance of such systems can be enhanced by improving accuracy of the hardware and robustness of the software used in the system. This paper presents a new approach for enhancing the capability of a laser vision system by applying hardware compensation and using efficient analysis software. A 3D geometrical model is developed to study and compensate for possible distortions in installation of gantry robot on which the vision system is mounted. Appropriate compensation is applied to the inspection data obtained from the laser vision system based on the parameters in 3D model. The present laser vision system is used for dimensional inspection of car chassis sub frame and lower arm assembly module. An algorithm based on simplex search techniques is used for analyzing the compensated inspection data. The details of 3D model, parameters used for compensation and the measurement data obtained from the system are presented in this paper. The details of search algorithm used for analyzing the measurement data and the results obtained are also presented in the paper. It is observed from the results that, by applying compensation and using appropriate algorithms for analyzing, the error in evaluation of the inspection data can be significantly minimized, thus reducing the risk of rejecting good parts.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.479-484
• /
• 2004

It is the present situation that the relevant data with the compensation and payment is filed and managed in the form of document or Excell. In case of the large volume dam construction, the management of the data about the sinking areas is conducted inefficiently in view of time management and economy through using the administrative manpower and data formating manpower. There is also problem about where and how to keep the data owing to the enormous data. As a result of the raised questions, through constructing the system which is linked with the location information and property information which is relevant to the compensation to increase the applying value of the information about the compensation and apply document management system to the geographic information system, the management system through computerizing for searching the uncompensated areas in appropriate areas and compensation information in the compensated areas is projected. Through constructing geographic information system, it is expected to create various information effects, using the function of the necessary area search for the boundary survey, actual condition survey, uncompensated area search, and re-compensated area search.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.247-254
• /
• 2013

In this paper, dynamic response analysis of a heave compensation system is performed for offshore drilling operations based on multibody dynamics. With this simulation, the efficiency of the heave compensation system can be virtually confirmed before it is applied to drilling operations. The heave compensation system installed on a semi-submersible platform consists of a passive and an active heave compensator. The passive and active heave compensator are composed of several bodies that are connected to each other with various types of joints. Therefore, to carry out the dynamic response analysis, the dynamics kernel was developed based on mutibody dynamics. To construct the equations of motion of the multibody system and to determine the unknown accelerations and constraint forces, the recursive Newton-Euler formulation was adapted. Functions of the developed dynamics kernel were verified by comparing them with other commercial dynamics kernels. The hydrostatic force with nonlinear effects, the linearized hydrodynamic force, and the pneumatic and hydraulic control forces were considered as the external forces that act on the platform of the semi-submersible rig and the heave compensation system. The dynamic simulation of the heave compensation system of the semi-submersible rig, which is available for drilling operations with a 3,600m water depth, was carried out. From the results of the simulation, the efficiency of the heave compensation system were evaluated before they were applied to the offshore drilling operations. Moreover, the calculated constraint forces could serve as reference data for the design of the mechanical system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.914-920
• /
• 2003

In this paper, we deal with two drift compensation algorithms of acceleration sensor for measuring the galloping on power transmission line. Firstly, the block diagram of galloping measurement system is given and a galloping model is presented. Secondly, two compensation algorithms, a simple compensation and a period compensation, are proposed. A simple compensation algorithm uses the drifts of velocity and distance at fixed periods, so it is useful for constant drift case. Next, a period compensation algorithm can compensate a periodic drift. This algorithm uses the previous measured data and compensated data for constant period, where the period is obtained by FFT method. Lastly, the effectiveness of proposed algorithms is verified by comparing between two algorithms in simulation, and its characteristics and the drift error bound are shown, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.763-769
• /
• 2009

A series voltage compensation(SVC) system is a power-electronics controller that can protect sensitive loads from disturbance in the supply system. Especially, voltage sags are considered the dominant disturbances affecting the power quality. This paper dealt with a system of off-line type voltage sag compensation by using a bi-directional DC/DC converter of environmentally friendly ultra-capacitor. This capacitor is attached to the DC link of SVC through the high-efficiency DC/DC converter in order to compensate the DC link voltage drop during short-term power interruption as voltage sags. Therefore, in this paper, a DC/DC converter to control high-efficiency energy of ultra-capacitor and voltage sag detection algorithm of off-line type SVC systems are newly introduced. According to the results of experimental of prototype system, it is verified that the proposed system has effectiveness of voltage sag compensation using an ultra-capacitor.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.210-213
• /
• 2002

This paper addresses the design and implementation of compensation of rain attenuation for Ka-band satellite communication system complied with DVB-RCS[2]. A structure of rain fade compensation scheme in the Ka-band satellite communication system is presented. Rain fade compensation scheme in this paper is mainly applied into return-link, which is the path through which user terminal transmit the data tn hub system providing a service. Symbol rate and code rate of channel code are used as variable transmission parameter for rain fade compensation. For estimation of channel environment, SNR of the user terminal which is measured by demodulator of hub system is used. Rain fade compensation scheme in the paper changes the symbol rate and/or code rate according to the measured SNR so that it can compensate the attenuation of the signal.

• Journal of Agricultural Extension & Community Development
• /
• v.18 no.3
• /
• pp.351-384
• /
• 2011

The purpose of this study is to look at the case of the German compensation system for farmers' accidents and to build a basic scheme in our country's compensation system for farmers' accidents. When you view examples of Germany, the social insurance scheme for farmers accidents in korea should be design as an independent institution from the existing industrial accident insurance, and it comes to relationships with other social insurance system, preferably with complementary personalities. A general rule of the compensation system applies to all farmers in principle but the coverage limits part-time farmers. Financial burden consists of the mix of insurance premium and state aid. The type and level of benefits is similar to the current industrial accident insurance, which give priority to places on economic security for keeping farmworks, such as cost for using temporary farmers, rather than income loss. In terms of financial system, pay-as-you-go system would be better because of immediate payment with the introduction of the compensation system. The compensation system might be managed and administrated by the existing nationwide organization. Of course, for operating of system review and further research on the technical details such as premium issues and funding problems of government support, the exact classification of the target coverage, premiums based on estimated income for the farmers' estimation, the exact statistical data on the accumulation of agricultural disaster is needed.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.569-580
• /
• 2020

The identification of delays and delay compensation are critical problems in real-time hybrid simulations (RTHS). Conventional delay compensation methods are mostly based on the assumption of a constant delay. However, the system delay may vary during tests owing to the nonlinearity of the loading system and/or the behavioral variations of the specimen. To address this issue, this study presents an adaptive delay compensation method based on a discrete model of the loading system. In particular, the parameters of this discrete model are identified and updated online with the least-squares method to represent a servo hydraulic loading system. Furthermore, based on this model, the system delays are compensated for by generating system commands using the desired displacements, achieved displacements, and previous displacement commands. This method is more general than the existing compensation methods because it can predict commands based on multiple displacement categories. Moreover, this method is straightforward and suitable for implementation on digital signal processing boards because it relies solely on the displacements rather than on velocity and/or acceleration data. The virtual and real RTHS results show that the studied method exhibits satisfactory estimation smoothness and compensation accuracy. Furthermore, considering the measurement noise, the low-order parameter models of this method are more favorable than that the high-order parameter models.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.126-136
• /
• 1992

In this paper, a simple structured feedback compensation scheme for a electro-hydraulic servo system to keep the response characteristics unchanged regardless of the load variation is proposed. In electro-hydraulic servo system, servovalve is most important control element. But the relation between input corrent and output flowrate of the servovalve has properties as follows; firstly, in spite of constant input current, output flowrate decreases as load pressure increases, secondly, according to frequency response of typical servovalve, the characteristics of gain and phase shift is something like 2'nd order system. Load pressure feedback compensation method has been applied to eliminate the first influence, the second influence has been improved by phase lead compensation method. As a result of above compensation methods, regardless of variation load condition, spring and inertia load, the compensation scheme has been verified to be effective within the range of frequency less than 25Hz by static response and dynamic response in time domain and frequency domain through experiments.