• 한국통신학회논문지
• /
• 제30권5C호
• /
• pp.364-370
• /
• 2005

얼굴 인식에서는 입력 영상에서 얼굴을 검출한 후에 데이터베이스의 영상과 위치와 크기를 일치시키는 등록 과정이 필요하다. 본 논문에서는 영상의 등록 과정에서 발생하는 얼굴영상의 이동, 회전, 혹은 크기의 차이를 eigenspace에서 보정하는 알고리즘을 제안하였다. 이를 위하여 얼굴 영상의 수직, 수평 이동, 회전, 크기 변환 등의 등록오차를 선형보간 행렬로 근사하였다. 각 변환행렬을 사용하여 등록오차에 따른 미분계수를 eigenspace에서 구하면 subpixel 단위의 등록 오차를 보정할 수 있다. 제안된 방법은 공간 영역에서 오차를 보정하는 것보다 계산량이 훨씬 더 적다. 오차 보정 후 얼굴 인식률이 크게 향상되는 것을 실험으로 확인하였다.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.470-477
• /
• 1990

Singh's multi-level method is extended to the optimal tracking control of a large interconnected dynamical system which has coupled states and coupled inputs. The steady-state tracking error and a convergence condition for the extended multi-level method are derived analytically and the results show that the steady-state tracking error and a convergence rate have to be compromised. Also, a new multi-level method which is advantageous over the Singh's method in steady-state tracking error and computational burden is proposed by introducing nominal inputs into the performance index. The resulting feedback gain matrix and the compensation vector are optimal for all initial conditions so that eventual on-line computation is minimal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.4227-4240
• /
• 2019

In this paper, we present our proposed magnetic induction based wireless communication system. The proposed system is designed to perform communication as well as distance measurement in underground environments. In order to improve the communication quality, we propose and implement the adaptive channel compensation technique. Based on the fact that the channel may be fast time-varying, we keep track of the channel status each time the data is received and accordingly compensate the channel coefficient for any change in the channel status. By using the proposed compensation technique, the developed platform can reliably communicate over distances of 10m while the packet error rate is being maintained under 5%. We also implement the distance measurement block that is useful for various applications that should promptly estimate the location of nearby nodes in communication. The distance between two nodes in communication is estimated by generating a table describing pairs of the magnetic signal strength and the corresponding distance. The experiment result shows that the platform can estimate the distance of a node located within 10m range with the measurement error less than 50cm.

• 한국전자통신학회논문지
• /
• 제5권5호
• /
• pp.465-470
• /
• 2010

본 논문에서는 MPEG2 부호화기내에서 삽입된 워터마크(watermark)의 비트 검출율에 따라 워터마크의 삽입 세기를 적응적으로 조절하는 방법을 제안한다. MPEG2 부호화내에서 워터마크를 삽입하고, 움직임 보상을 위해 복호화한 프레임에서 추출한 워터마크의 BER(bit error rate) 값에 따라 워터마크 세기를 적응적으로 조절한다. 워터마크의 각 비트는 주파수 확산방식을 사용하여 삽입한다. 워터마크 검출은 MPEG2 복호화시에 주파수 영역에서 실시간으로 검출한다. 실험 결과, PSNR(peak signal to noise ratio)은 고정적인 워터마크 세기를 적용한 경우 31.5dB, 가변적 워터마크 세기를 적용한 경우 33.0dB이다. 평균 BER은 0.126으로 허용 한계치 0.2보다 작다.

• ETRI Journal
• /
• 제31권1호
• /
• pp.21-30
• /
• 2009

In low bit-rate video transmission, the payload of a single packet can often contain a whole coded frame due to the high compression ratio in both spatial and temporal domains of most modern video coders. Thus, the loss of a single packet not only causes the loss of a whole frame, but also produces error propagation into subsequent frames. In this paper, we propose a novel whole frame error concealment algorithm which reconstructs the first of the subsequent frames instead of the current lost frame to suppress the effects of error propagation. In the proposed algorithm, we impose a constraint which uses side match distortion (SMD) and overlapped region difference (ORD) to estimate motion vectors between the target reconstructed frame and its reference frame. SMD measures the spatial smoothness connection between a block and its neighboring blocks. ORD is defined as the difference between the correlated pixels which are predicted from one reference pixel. Experimental results show that the proposed algorithm effectively suppresses error propagation and significantly outperforms other conventional techniques in terms of both peak signal-to-noise ratio performance and subjective visual quality.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1393-1396
• /
• 2002

무선 ATM(Asynchronous Transfer Mode) 망을 기본으로 하여 ATM망에서 사용하는 서비스 종류인 CBR(Constant Bit Rate), rtVBR(Real-Time Variable Bit Rate), nrtVBR(Non-Real-Time Variable Bit Rate), ABR(Available Bit Rate), UBR(Unspecified Bit Rate)에 따른 플로우를 우선 각 서비스 흐름에 따라서 공평하게 패킷 스케줄링 한다. 그리고 각 서비스 종류에 따라 대역이나 지연에 따라 모든 사용자의 다양한 서비스 트래픽에 공평하게 서비스하는 구조를 갖는다. 아울러 무선 통신망 채널에 에러가 발생할 경우를 고려하여 각 서비스 트래픽에 대한 QoS(Quality of Service)를 보장해주는 무선 ATM 통신망에서 동작하는 스케줄링 알고리즘을 제안하여 시뮬레이션과을 통해 기존의 방법과 성능을 비교하여 기존의 유선 통신망 스케줄링 알고리즘과 달리 무선망의 에러에 대한 각 트래픽의 에러에 대한 성능 향상에 대해 알아본다.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.45-51
• /
• 1999

Thermal expansion of the ball screw can directly affect the accuracy of positioning along the travel axis in the semi-closed loop type CNC Lathe. In this paper, use of MACRO variables can make the thermal displacement of the ball screw estimated. Also, the estimated displacements of the ball screw are controlled by calculating the interval of pitch error rate in the Numerical Control(NC). Under the constant operating conditions, the thermal expansion of the ball screw was measured to confirm the effectiveness of the compensation method in the CNC Lathe. By using this method the results show that the thermal displacement of the ball screw could be reduced to 20% compared with ordinary method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.31-36
• /
• 1997

Thermal expansion of the ball screw in semi-closed loop type CNC Lathe directly affects the position precision along the travel axis. In this paper, the thermal displacement of the ball screw is estimated by using macro variables. The estimated displacements of the ball screw are managed by calculating the interval of pitch error rate in the NC. The thermal behaviour of the ball screw of the CNC Lathe, under the constant operating conditions, was measured to examine the effectiveness of this compensation method. The results showed that thermal displacement of the ball screw could be maintained its accuracy better than 6${\mu}{\textrm}{m}$ while applying this method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.473-476
• /
• 2008

A simple voltage compensation pixel circuit for AMOLED is produced using low temperature polycrystalline silicon (LTPS) technology. Its operation is verified by AIM-SPICE. Simulation results show that the pixel circuit has high immunity to variation of LTPS-TFT and reduces the drop in luminance due to the degradation of the OLED.