• 제목/요약/키워드: Compatibility Condition

검색결과 240건 처리시간 0.023초

저압 화학 기상 증착법을 이용한 실리콘 표면 위의 텅스텐 박막의 증착 (Deposition of Tungsten Thin Film on Silicon Surface by Low Pressure Chemical Vapor Deposition Method)

  • 김성훈
    • 대한화학회지
    • /
    • 제38권7호
    • /
    • pp.473-479
    • /
    • 1994
  • 저압 화학 기상 증착법을 사용하여 $WF_6$의 환원반응으로 텅스텐 박막을 p형 실리콘 (100)표면위에 증착하였다. Cold-wall조건에서는 실리콘 기판과 $SiH_4$를 각각 이용하여 $WF_6$를 환원시켜 텅스텐 박막을 증착하였으며 hot-wall 조건에서는 $WF_6$$SiH_4$로 환원시켜 증착하였다. 박막의 결정구조는 어느 조건에서나 체심입방구조를 이루었으며, 증착조건에 따른 박막의 물리적 및 전기적 특성을 조사하였다. 증착된 박막을 온도 $800^{\circ}C$에서 열처리한 결과 hot-wall 조건의 박막이 $WSi_2$로 변화하였다. Hot-wall과 cold-wall조건에서의 박막을 분석한 결과 박막의 특성은 cold-wall조건이 우수하나 hot-wall조건에서는 열처리 방법에 의하여 실리콘 기판과 적합성이 우수한 것으로 알려진 $WSi_2$ 박막의 제조가 가능함을 알 수 있었다.

  • PDF

반복압출에 의한 LCP/PET 블렌드 조성에 따른 모폴로지 및 점탄성 거동 분석 (Analysis of Morphology and Viscoelastic Behavior of LCP/PET Blends by Repeated Extrusion)

  • 최용석;전한용
    • 폴리머
    • /
    • 제39권3호
    • /
    • pp.475-479
    • /
    • 2015
  • 모폴로지 분석을 통하여 반복압출에 의한 LCP(Vectra A950)와 PET 블렌드의 droplet 분산 상태를 확인하였다. 반복압출은 블렌드 조건별로 각각 2회, 3회 진행하였으며, 1회 압출 시료의 droplet 분산은 균일한 형태를 보였다. 하지만, 2회 및 3회 반복 압출 시료의 droplet 크기는 증가하였고 droplet이 시료의 중앙에 집중되는 현상을 확인할 수 있었다. 이러한 현상은 LCP/PET 블렌드의 상용성과 점탄성 거동에 기인한 것으로 생각된다. 끝으로 동일 방사조건에서 반복압출 LCP/PET 블렌드 chip을 방사하면 직경이 다른 섬유 제조가 가능할 것으로 생각된다.

섬유보강 콘크리트와 보통콘크리트로 합성된 이중 콘크리트 보의 휨 강도 (Flexural Strength of Dual Concrete Beams Composed of Fiber Reinforced Concrete and Normal Concrete)

  • 박대효;부준성;조백순
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.579-584
    • /
    • 2001
  • The reinforced concrete(RC) beam is developed cracks because the compression strength of concrete is strong but the tensile strength is weak. The structural strength and stiffness is decreased by reduction of tension resistance capacity of concrete due to the developed cracks. Using the fiber reinforced concrete that is increased the flexural strength and tensile strength at tensile part can enhance the strength and stiffness of concrete structure and decrease the tensile flexural cracks and deflection. Therefore, The reinforced concrete used the fiber reinforced concrete at tensile part ensure the safety and serviceability of the concrete structures. In this study, analytical model of a dual concrete beam that is composed of the normal strength concrete at compression part and the high tensile strength concrete at tensile part is developed by using the equilibrium condition of forces and compatibility condition of strains and is parted into elastic analytical model and ultimate analytical model. Three group of test beam that is formed of one reinforced concrete beam and two dual concrete beams for each steel reinforcement ratio is tested to examine the flexural behavior of dual concrete beams. The comparative study of total nine test beams is shown that the ultimate load of a dual concrete beams relative to the reinforced concrete beams have an increase in approximately 30%. In addition, the initial flexural rigidity, as used here, refer to the slope of load-deflection curves in elastic state is increased and the deflection is decreased.

  • PDF

일체형 주상용 몰드 변압기의 덕트에 따른 열해석 특성 연구 (The Thermal Analysis of Pole Mount Mold Transformer with One-body Molding by Duct Condition)

  • 조한구;이운용;박영두
    • 한국전기전자재료학회논문지
    • /
    • 제17권3호
    • /
    • pp.348-352
    • /
    • 2004
  • The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and ow loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

강원도 어도의 설치 현황 및 I형 아이스하버식 어도 적용성 연구 (Establishment present of fish-road in Kangwondo and Study to apply fish-road is ice harbor 1-type)

  • 최한규;최영수;전영수
    • 산업기술연구
    • /
    • 제26권B호
    • /
    • pp.63-71
    • /
    • 2006
  • The concerned object of the construction industry is environment. It is one of the main purposes of today's construction that human can live reasonably in nature. This study is about the fish-road connecting hydraulic structure in the river with nature. Chapter 2, starting with the general investigation about fish-road and helps comprehension for relatively general fish-road such as necessity, establishment purpose, history, study example, relating domestic law, design condition, consideration and form of fish-road. Chapter 3, containing the present condition of fish-road facilities in Gangwon-Do and thoughts of the problems and general countermeasures of existing fish-road. Chapter 4, Having Examined compatibility by amount of flowing water through hydraulic model test in the Ice harbor I-type model. chapter 5, Analyzation and arrangement to efficient establishment plan of fish-road and the result of the hydraulic model experiment to be beaconed a little in forward fish-road study. In the hydraulic model test result, when we suppose establishment of 1~3 in slope of 1/20, could know that applicable drought flow of the river is $0.06{\sim}3.0m^3/sec$ in case of Ice harbor I-type which transforming Ice harbor that was invented as studying project of the Ministry of Environment.

  • PDF

THE PREDICTION OF pH BY GIBBS FREE ENERGY MINIMIZATION IN THE SUMP SOLUTION UNDER LOCA CONDITION OF PWR

  • Yoon, Hyoungju
    • Nuclear Engineering and Technology
    • /
    • 제45권1호
    • /
    • pp.107-114
    • /
    • 2013
  • It is required that the pH of the sump solution should be above 7.0 to retain iodine in a liquid phase and be within the material compatibility constraints under LOCA condition of PWR. The pH of the sump solution can be determined by conventional chemical equilibrium constants or by the minimization of Gibbs free energy. The latter method developed as a computer code called SOLGASMIX-PV is more convenient than the former since various chemical components can be easily treated under LOCA conditions. In this study, SOLGASMIX-PV code was modified to accommodate the acidic and basic materials produced by radiolysis reactions and to calculate the pH of the sump solution. When the computed pH was compared with measured by the ORNL experiment to verify the reliability of the modified code, the error between two values was within 0.3 pH. Finally, two cases of calculation were performed for the SKN 3&4 and UCN 1&2. As results, pH of the sump solution for the SKN 3&4 was between 7.02 and 7.45, and for the UCN 1&2 plant between 8.07 and 9.41. Furthermore, it was found that the radiolysis reactions have insignificant effects on pH because the relative concentrations of HCl, $HNO_3$, and Cs are very low.

초대형 컨테이너선 구조 설계를 위한 비선형 파랑하중 생성 및 적용 (Generation & Application of Nonlinear Wave Loads for Structural Design of Very Large Containerships)

  • 정병훈;류홍렬;최병기
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2005년도 특별논문집
    • /
    • pp.15-21
    • /
    • 2005
  • In this paper, the procedure of generation and application of nonlinear wave loads for structural design of large container carrier was described. Ship motion and wave load was calculated by modified strip method. Pressure acting on wetted hull surface was calculated taking into account of relative hull motion to the wave. Design wave height was determined based on the most sensitive wave length considering rule vertical wave bending moment at head sea or fellowing sea condition. And the enforced heeling angie concept which was introduced by Germanischer Lloyd (GL) classification had been used to simulate high torsional moment in way of fore hold parts similar to actual sea going condition. Using wave load generated from this dynamic load calculation, FE analyses were performed. With this result, yielding, buckling, hatch diagonal deflection and fatigue strength of hatch corners were reviewed based on the requirement of GL classification. The results of FE analysis show good compatibility with GL classification.

  • PDF

일체형 주상용 몰드변압기의 덕트에 따른 열해석 특성 연구 (The Thermal Analysis of Pole Mount Mold Transformer with One-body Molding by Duct Condition)

  • 조한구;이운용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.1135-1138
    • /
    • 2003
  • The transformer is major equipment in power receiving and substation facilities. Necessary conditions required for the transformer are compactness, lightness, high reliability, economic advantages, and easy maintenance. The pole-mount transformer installed in distribution system is acting direct role in supply of electric power and it is electric power device should drive for long term. Most of modem transformer are oil-filled transformer and accident is happening considerable. The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. One body molding transformer needs some cooling method because heat radiation between each winding is difficult. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

  • PDF

Attenuation of quasi-Lamb waves in a hydroelastic system "elastic plate+compressible viscous fluid+rigid wall"

  • Akbarov, Surkay D.;Negin, Mesut
    • Structural Engineering and Mechanics
    • /
    • 제81권4호
    • /
    • pp.443-459
    • /
    • 2022
  • The paper studies the dispersion and attenuation of propagating waves in the "plate+compressible viscous fluid layer" system in the case where the fluid layer flow is restricted with a rigid wall, and in the case where the fluid layer has a free face. The motion of the plate is described by the exact equations of elastodynamics and the flow of the fluid by the linearized Navier-Stokes equations for compressible barotropic Newtonian viscous fluids. Analytical expressions are obtained for the amplitudes of the sought values, and the dispersion equation is derived using the corresponding boundary and compatibility conditions. To find the complex roots of the dispersion equation, an algorithm based on equating the modulus of the dispersion determinant to zero is developed. Numerical results on the dispersion and attenuation curves for various pairs of plate and fluid materials under different fluid layer face conditions are presented and discussed. Corresponding conclusions on the influence of the problem parameters on the dispersion and attenuation curves are made and, in particular, it is established that the change of the free face boundary condition with the impermeability condition can influence the dispersion and attenuation curves not only in the quantitative, but also in the qualitative sense.

철근콘크리트와 프리스트레스트 콘크리트 보의 시간의존적 거동해석 (Time Dependent Analysis of Reinforced and Prestressed Concrete Beams)

  • 곽호경
    • 대한토목학회논문집
    • /
    • 제14권1호
    • /
    • pp.1-12
    • /
    • 1994
  • 본 논문은 철근콘크리트와 프리스트레스트 콘크리트 보의 시간의존적 거동해석에 관한 내용으로 재령-보정 유효 탄생계수법에 토대를 두고 단면 내 힘의 평형관계와 변형의 Compatibility 조건을 사용한 반복해석을 통해 부재의 거동을 파악하였다. 콘크리트의 전 단면이 유효하고 부재가 선형 탄생체로 거동하며 강재의 효과는 단지 환산단면적 개념에 따라 해석시 강성만으로 보정되는 기존의 해석방법과는 달리 모든 재료가 고유의 성질을 유지할 수 있도록 함께 고려하며 균열의 영향도 동시에 고려함으로써 모든 하중조건에서 보다 정확한 결과를 얻을 수 있도록 하였다. 특히 예제해석을 통해 시간에 따른 각 재료의 응력 재분배, 장기처짐의 발생 등 시간의존적 거동에 영향을 미치는 여러 인자의 비교 검토와 균열의 영향분석을 하였으며 설계시 보다 정확하고 합리적으로 이들의 효과를 고려할 수 있도록 하였다.

  • PDF