• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.207-208
• /
• 2007

In this paper, the tilted image sequence, which is obtained the transmission electron microscopy (TEM) for a 3D reconstruction, is aligned based on the fiducial marker method. A direct correlation method is also conducted between adjacent tilted images for the performance comparison. Using real TEM tilted images, we can successfully perform the alignment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.515-517
• /
• 2007

In this study we attempted to estimate damage scope such as bridges destruction, farmland deformation, forest damage, etc occurred by typhoon using two digital aerial images for future high-resolution Kompsat-3 applications. The process procedures are followings: First, image registration between time-different aerial images was implemented. In this process one image was geometrically corrected by image-to-image registration. Second, image classification was done according to 4 classes. Finally through the comparison of classified two images the area of damage by flood and storm was approximately calculated. These results showed that it is possible to estimate the damage scale relatively rapidly using high-resolution images.

• 한국지역지리학회지
• /
• 제5권1호
• /
• pp.137-150
• /
• 1999

우리나라에서 위성자료를 이용한 토지이용에 관한 연구는 현황분석이 중심이고, 토지이용 변화에 관한 연구는 분석기법에 대한 적실성 평가 없이 특정기법이 적용되어 왔다. 본 연구는 도시지역의 토지이용 변화 검색에 많이 활용되고 있는 다섯 가지 토지이용 변화 검색기법을 선정하여 대구광역시 북구를 사례로 각 검색기법의 정확도를 비교 분석하였다. 핵심데이터는 1994년과 1997년에 촬영한 Landsat TM영상과 항공사진이다. 위성자료를 이용한 토지이용 변화검색에는 pre-classification comparison method가 post-classification comparison method보다 효과적이었다. Pre-classification comparison methods 중에서는 image differencing method가, 특히 임계치 1.0에서의 image differencing method의 DIF2 변화이미지의 경우가 가장 정확도가 높게 나타났다.

• Imaging Science in Dentistry
• /
• 제51권3호
• /
• pp.279-290
• /
• 2021

Purpose: Using images in the facial image comparison process poses a challenge for forensic experts due to limitations such as the presence of facial expressions. The aims of this study were to analyze how morphometric changes in the face during a spontaneous smile influence the facial image comparison process and to evaluate the reproducibility of measurements obtained by digital stereophotogrammetry in these situations. Materials and Methods: Three examiners used digital stereophotogrammetry to obtain 3-dimensional images of the faces of 10 female participants(aged between 23 and 45 years). Photographs of the participants' faces were captured with their faces at rest (group 1) and with a spontaneous smile (group 2), resulting in a total of 60 3-dimensional images. The digital stereophotogrammetry device obtained the images with a 3.5-ms capture time, which prevented undesirable movements of the participants. Linear measurements between facial landmarks were made, in units of millimeters, and the data were subjected to multivariate and univariate statistical analyses using Pirouette^® version 4.5 (InfoMetrix Inc., Woodinville, WA, USA) and Microsoft Excel^® (Microsoft Corp., Redmond, WA, USA), respectively. Results: The measurements that most strongly influenced the separation of the groups were related to the labial/buccal region. In general, the data showed low standard deviations, which differed by less than 10% from the measured mean values, demonstrating that the digital stereophotogrammetry technique was reproducible. Conclusion: The impact of spontaneous smiles on the facial image comparison process should be considered, and digital stereophotogrammetry provided good reproducibility.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• 복식
• /
• 제53권5호
• /
• pp.1-12
• /
• 2003

This paper proposes a system for measuring the 3D human bodies using the multiple 2D images. The system establishes the multiple image input circumstance from the digital camera for image measurement. The algorithm considering perspective projection leads us to estimate the 3D human bodies from the multiple 2D images such as frontal. side and rear views. The results of the image measurement is compared those of the direct measurement and the 3D scanner for the total 40 items (12 heights, 15 widths and 13 depths). Three persons measure the 40 items using the three measurement methods. In comparison of the results obtained among the measurement methods and the persons, the results between the image measurement and the 3D scanner are very similar. However, the errors for the direct measurement are relatively larger than those between the image measurement and the 3D scanner. For example, the maximum errors between the image measurement and the 3D scanner are 0.41cm in height, 0.39cm in width and 0.95cm in depth. The errors are acceptable in body measurement. Performance of the image measurement is superior to the direct. because the algorithm estimates the 3D positions using the perspective projection. In above comparison, the image measurement is expected as a new method for measuring the 3D body, since it has the various advantages of the direct measurement and 3D scanner in performance for measurement as well as in the devices, cost, Portability and man power.

• 한국컴퓨터정보학회논문지
• /
• 제17권4호
• /
• pp.31-39
• /
• 2012

우천시 도로에 내린 비로 인해 도로 표면에 수막현상이 일어나서 맑은 날의 도로 보다 제동력이 떨어져 빗길 사고가 빈번하게 발생한다. 이러한 빗길의 주의정보를 포함한 안전운전을 위해 운전자에게 도로 상황 안내판에 도로의 상황 및 기후정보를 제공하고 있다. 그러나 이러한 안내 정보는 국부적이고 세부적인 도로상태 정보를 제공하지 못하고 범용적이다. 이에 본 논문에서는 도로에 설치되어 있는 CCVT의 영상을 활용하여 도로 표면의 영상을 비교하여 안전운전을 저해하는 요소를 영상으로 판별하는 메커니즘을 제안한다. 영상 비교는 평상시 맑은 날의 도로 영상을 원본 영상으로 활용하여 우천시 발생하는 도로의 상태를 상황별로 나누어 판별하여 조기에 운전자에게 주의 정보를 제공하여 안전운전을 할 수 있도록 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권8호
• /
• pp.2552-2570
• /
• 2022

Underwater images usually have various problems, such as the color cast of underwater images due to the attenuation of different lights in water, the darkness of image caused by the lack of light underwater, and the haze effect of underwater images because of the scattering of light. To address the above problems, the channel attention mechanism, strengthen-operate-subtract (SOS) boosting mechanism and gated fusion module are introduced in our paper, based on which, an underwater image recovery network is proposed. First, for the color cast problem of underwater images, the channel attention mechanism is incorporated in our model, which can well alleviate the color cast of underwater images. Second, as for the darkness of underwater images, the similarity between the target underwater image after dehazing and color correcting, and the image output by our model is used as the loss function, so as to increase the brightness of the underwater image. Finally, we employ the SOS boosting module to eliminate the haze effect of underwater images. Moreover, experiments were carried out to evaluate the performance of our model. The qualitative analysis results show that our method can be applied to effectively recover the underwater images, which outperformed most methods for comparison according to various criteria in the quantitative analysis.

• 천문학회보
• /
• 제37권2호
• /
• pp.99.2-99.2
• /
• 2012

We updated the far-ultraviolet (FUV) spectral images of the entire Vela supernova remnant (SNR) using newly processed FIMS/SPEAR data. In the present study, we compare the newly produced FUV images with the X-ray and $H{\alpha}$ images, and examine how the Vela SNR evolves and interacts with the ambient medium on a global scale. The comparison with X-ray images has revealed a FUV filamentary feature corresponding with the boundary of the northeast-southwest asymmetry of the X-ray shell. The relatively low O IV] ${\lambda}1404$ to O III] ${\lambda}{\lambda}1661$, 1666 ratio estimated on the FUV filament is compatible with the previous proposal that the observed asymmetry of the Vela SNR could be due to the ${\gamma}2$ Velorum stellar wind bubble (SWB). The southwest FUV features surrounding a faint extended X-ray region are characterized as the region where the Vela SNR is interacting slightly stronger with ambient mediums within the dim X-ray southwest section. From a comparison with the $H{\alpha}$ image, we identify a ring-like $H{\alpha}$ feature overlapped with an extended hot X-ray feature of similar size and two local peaks of C IV ${\lambda}{\lambda}1548$, 1551 emission. Their morphologies are consistent with the expected shape when the $H{\alpha}$ ring is in direct contact with the near or far side of the Vela SNR. We suggest that the B3V-type star HD 76161 found at the center of the $H{\alpha}$ ring would be the exciting source of the H II region.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.172-178
• /
• 2021

Purpose: This study aimed to develop a deep learning architecture combining two task models to generate synthetic computed tomography (sCT) images from low-tesla magnetic resonance (MR) images to improve metallic marker visibility. Methods: Twenty-three patients with cervical cancer treated with intracavitary radiotherapy (ICR) were retrospectively enrolled, and images were acquired using both a computed tomography (CT) scanner and a low-tesla MR machine. The CT images were aligned to the corresponding MR images using a deformable registration, and the metallic dummy source markers were delineated using threshold-based segmentation followed by manual modification. The deformed CT (dCT), MR, and segmentation mask pairs were used for training and testing. The sCT generation model has a cascaded three-dimensional (3D) U-Net-based architecture that converts MR images to CT images and segments the metallic marker. The performance of the model was evaluated with intensity-based comparison metrics. Results: The proposed model with segmentation loss outperformed the 3D U-Net in terms of errors between the sCT and dCT. The structural similarity score difference was not significant. Conclusions: Our study shows the two-task-based deep learning models for generating the sCT images using low-tesla MR images for 3D ICR. This approach will be useful to the MR-only workflow in high-dose-rate brachytherapy.