• 제목/요약/키워드: Comparison of coordinates

검색결과 184건 처리시간 0.026초

복합레진의 광중합 전·후와 shade guide의 색차 비교 (COLOR DIFFERENCES BETWEEN RESIN COMPOSITES BEFORE- AND AFTER-POLYMERIZATION, AND SHADE GUIDES)

  • 전이주;조성식;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제24권2호
    • /
    • pp.299-309
    • /
    • 1999
  • The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

  • PDF

두경부 암환자 치료 시 CT On-rail System을 이용한 이하선의 위치 보정 및 선량 평가 (Evaluation of Dose and Position Compensation of Parotid Gland Using CT On-rail System in Head-and-Neck Cancer)

  • 장형준;임충근;천금성;정일선;김회남
    • 대한방사선치료학회지
    • /
    • 제20권2호
    • /
    • pp.83-89
    • /
    • 2008
  • 목 적: 두경부 암 환자 치료 시 표적 및 주변 장기(Target 및 Structure)를 확인하는 방법으로 MVCBCT, KVCBCT, CT On-rail System, Ultrasound 등이 이용된다. 이 중 MVCBCT의 경우는 뼈를 이용한 표적 및 주변 장기의 확인에는 유용하나, 연부조직으로 구성된 표적 및 주변 장기의 확인에는 어려움이 있다. 이에 본 연구에서는 CT On-rail System을 이용하여 두경부 암 환자의 이하선의 움직임에 대한 파악과 체적의 변화에 따른 선량의 변화를 연구해 보고자 한다. 대상 및 방법: 본원에서 두경부 암으로 치료받는 환자 5명을 대상으로 하였다. 선택된 환자는 시멘스사 ARTISTE CT Vision (CT On-rail System)을 이용하여 주당 3회씩 CT 스캔을 시행하였다. CT 스캔 후 이하선의 움직임을 치료 계획시의 영상과 비교하여 이동된 좌표를 얻었으며, 이하선의 체적을 확인하기 위하여 획득한 CT영상을 치료계획 시스템(RTP System)에 전송하여 변화된 체적에 따른 선량분포의 차이를 확인하였다. 결 과: 이하선의 움직임에 의한 표적 좌표의 변화는 X: -0.4~0.4 cm, Y: -0.4~0.3 cm, Z: -0.3~0.3 cm이었다. GTV의 체적은 평균 7.11%/week로 감소되었으며 이하선의 체적과 선량의 변화는 평균적으로 좌측 이하선의 체적은 평균 4.81%/week, 우측 이하선의 체적은 2.91%/week, 선량은 좌측 이하선의 선량은 3.66%/week, 우측 이하선 선량은 2.01%/week 감소하였다. 결 론: CT On-rail System에서 얻어진 영상을 이용하여 표적 및 주변 장기를 확인한 결과 MVCBCT를 이용한 영상에 비해 연부조직의 관찰에 우수함을 알 수 있었다. 또한, 획득한 영상으로 재 치료계획(Replanning)을 한 후 선량의 재분포를 획득한 결과 단순한 움직임의 보정뿐 아니라 체적의 변화를 고려한 정확한 선량분포를 얻을 수 있었으며, 이렇게 보정된 선량의 전달은 Adaptive Targeting Radiotherapy가 가능할 수 있다고 사료된다. 향후 선량의 전달까지 걸리는 시간을 단축할 수 있는 Real Time Adaptive Targeting Radiotherapy가 구축되어야 할 것으로 사료된다.

  • PDF

일반두부방사선계측사진과 디지털방사선계측사진의 계측점 식별의 오차 및 재현성에 관한 비교 연구 (The comparison of landmark identification errors and reproducibility between conventional lateral cephalometric radiography and digital lateral cephalometric radiography)

  • 이양구;양원식;장영일
    • 대한치과교정학회지
    • /
    • 제32권2호통권91호
    • /
    • pp.79-89
    • /
    • 2002
  • 본 연구의 목적은 일반두부방사선계측사진과 디지털두부방사선계측사진의 계측점 식별의 오차를 구하여 각각의 영상에서 오차의 특징을 살펴보고 재현성을 비교 평가하는 것이다. 연구 대상은 서울대학교병원 치과진료부 교정과에 내원한 교정 환자 중 18세에서 29세 사이의 성인 환자 중에서 일반두부방사선계측사진군과 디지털두부방사선계측사진군 각각 15명씩 30명을 무작위로 선택하여 연구 대상으로 하였으며 남녀의 구별이나 두개 안면 구조의 형태는 고려하지 않았다. 계측점은 동일인이 시간차를 두고 식별 하였다. 식별 후 각 계측점은 좌표 (x, y)로 표시하였으며, 처음 계측점을 식별한 두부방사선계측사진군을 T1으로, 1 주 후 동일 계측점을 재식별한 두부방사선계측사진군을 T2로, 1 달 후 동일계측점을 재식별한 두부방사선계측사진군을 T3로 분류하였다. 오차의 평균과 표준편차는 x좌표, y좌표로 구분하여 계산하였다. 초기 식별 1주 후 재식별시 오차는 T2-T1(x), T2-T1(y)로, 초기 측정 1달 후 재시별시 오차는 T3-T1(x), T3-T1(y)로 표시하였으며 일반두부방사선계측사진과 디지털두부방사선계측사진으로 각각 나누었다. 재현성의 평가를 위한 오차간의 통계학적인 검정은 independent t-test를 사용하였으며 다음과 같은 결론을 얻었다. 1. 디지털두부방사선계측사진이 일반두부방사선계측사진보다 일반적으로 오차의 평균 및 표준편차가 작았다. 2. 일반두부방사선계측사진의 오차와 디지털두부방사선계측사진의 오차가 통계학적으로 유의성 있는 차이를 보인 항목은 드물었다. 3.상의 향상을 통한 오차의 개선은 한계가 있었으며 상이 향상되더라도 각 계측점의 오차 의 경향은 크게 변하지 않았다.

Multiple arc FSRT와 Conformal FSRT의 DVH 비교 (The Comparison of DVH between Multiple arc FSRT and Conformal FSRT)

  • 김기환;김준상;장지영;김재성;김성호;송창준;박민규;존문준
    • Radiation Oncology Journal
    • /
    • 제17권3호
    • /
    • pp.261-267
    • /
    • 1999
  • 목적 : Multiple arc FSRT (fractionated stereotactic radiotherapy)와 conformal FSRT의 치료계획에 있어서 종양의 모양과 DVH (dose volume histogram)를 비교하여 두 기법간의 유용성에 대하여 논하고자 한다. 대상 및 방법 : 16명의 뇌종양 환자들을 대상으로 1997년 8월부터 1998년 12월까지 충남대학교병원 치료방사선과에서 112회의 FSRT를 실시하였다. 치료 전 모의치료에서 얻은 AP(Anterior-posterior), Lateral 필름상의 금속표지자의 좌표값을 ISOLOC프로그램에 입력하여 얻은 기준점과의 오차를 확인한 후 치료계획을 하였다. 치료계획은 종양용적과 종양표면적를 계산한 후 if (Irregular factor)를 고려하여 multiple arc FSRT 혹은 conformal FSRT를 선택하였다. Multiple arc FSRT는 종양의 IF값이 1-1.2인 경우에 고려하였고, conformal FSRT는 IF값이 1.3 이상인 경우에 고려한 후 종양용적에 대하여 처방선량 이상의 선량에 대한 DVH곡선에 의한 면적이 최소이면서 처방선량 이하의 선량에 대한 DVH곡선에 의한 면적이 최대가 되도록 하는 치료계획을 선택하여 평가하였다. 결과 : 치료전 모의치료에서 시행한 금속표지자의 좌표값을 ISOLOC프로그램에 입력하여 얻은 기준점과의 오차는 1 mm 이내였다. Huitlple arc FSRT는 누적DVH상에서 처방선량의 90, 91, 92, $93\%$에서 전체 종양용적을 포함하고 있었으며 평균값은 $90.6\%$이었고, conformal FSRT 는 누적DVH상에서 처방선량의 81, 85, 86, 87, $91\%$에서 전체 종양용적을 포함하고 있었으며 평균값은 $8\%$이었다. 두 방식 모두 결정장기들에는 최대선량의 $5\%$이하의 적은 선량이 조사되었다. 결론 : Multiple arc FSRT와 conformal FSRT를 IF를 기준으로 치료 계획하여 구형의 종양에 multiple arc FSRT를 시행하였으며, 불규칙한 모양의 종양에는 conformal FSRT를 시행하여 종양의 모양에 관계없이 적절한 FSRT치료계획을 수립할 수 있었다.

  • PDF