• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.5-14
• /
• 2008

Shear characteristics of quarry blasted rocks were compared using large scale direct shear tests and triaxial tests. For comparison purpose, similar test conditions were simulated as much as possible and three types of relative density (50%, 70%, 90%) were employed for the test. Results indicate that stress-strain behavior shows the same trend for two tests, but the measured shear strengths differ for the different test ms and depends on the relative density. At low relative density, the internal friction angles from direct shear test are smaller than those from triaxial tests. However, at high relative density, this phenomenon is reversed.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.377-400
• /
• 2022

The aim of this work is a numerical comparison (FEM) between lattice pyramidal-core panel and honeycomb core panel for different core thicknesses. By evaluating the mid-span deflection, the shear rigidity and the shear modulus for both core types and different core thicknesses, it is possible to define which core type has got the best mechanical behaviour for each thickness and the evolution of that behaviour as far as the thickness increases. Since a specific base geometry has been used for the lattice pyramidal core, the comparison gives us the opportunity to investigate the unit cell strut angle giving the higher mechanical properties. The presented work considers a detailed FEM modelling of a standard 3-point bending test (ASTM C393/C393M Standard Practice). Detailed FEM modelling addresses to detailed discretization of cores by means of beam elements for lattice core and shell elements for honeycomb core. Facings, instead, have been modelled by using shell elements for both sandwich panels. On lattice core structure, elements of core and facings are directly connected, to better simulate the additive manufacturing process. Otherwise, an MPC-based constraint between facings and core has been used for honeycomb core structure. Both sandwich panels are entirely built of Aluminium alloy. Prior to compare the two models, the FEM sandwich panel model with lattice pyramidal core needs to be validated with 3-point bending test experimental results, in order to ensure a good reliability of the FEM approach and of the comparison. Furthermore, the analytical validation has been performed according to Allen's theory. The FEM analysis is linear static with an increasing midspan load ranging from 50N up to 500N.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.893-901
• /
• 2008

The disconfirmation paradigm is the earliest researched and the most deeply researched of all the paradigms in marketing. Disconfirmation paradigm deals with the influence of expectation, perceived product performance, and the discord between the two on consumer satisfaction. The GAP-Model is based on the disconfirmation paradigm that tries to understand the effect of the gap between before purchase expectations and after purchase perceptions of the product performance on dependent variables such as customer satisfaction. The purpose of this research is to test whether regression coefficients of a P-Model(performance only model), an E-Model(expectation only model) and GAP(P-E)-Model are equivalent in explaining service value and loyalty. The Chow's F-Test is used to test the excellence of the 3 models. As a result of comparison and analysis, P-Model showed more excellence of service value and loyalty than E-Model or GAP-Model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.648-654
• /
• 2007

This paper presents the result of a comparison study to evaluate the performance of several semi-active control algorithms for use with large-scale MR damper applied to a building structure under seismic excitation using real-time hybrid test method. Recently, a variety of semi-active control algorithm studies are developed and generally evaluated the performance by using numerical analysis. In this paper real-time hybrid test method was applied to performance evaluating of semi-active control algorithms including a clipped optimal algorithm and the modulated homogeneous friction algorithm.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.177-186
• /
• 2012

This paper presents a comparison of the failure mechanism for high power converted white LEDs(3W) with the commercially available YAG:Ce and silicate phosphor. We carry out the normal aging life test for 10,000 hours, the high temperature aging test for 8,000 hours, the high temperature and humidity aging test for 8,000 hours and the current aging testing for 5,000 hours. The optical and electrical parameters of LEDs were monitored, such as lumen, correlated color temperature (CCT), chromaticity coordinates(x, y), thermal resistance, I -V curve and spectrum intensity. The stress induced a luminous flux decay on LED in all experiments and causes a failure. So we try to find out what's a main failure mechanism for a high power LED.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.4
• /
• pp.275-279
• /
• 2016

Dengue fever is a vector borne disease caused by a dengue virus. It is an RNA virus of the family flaviviridae, with different serotypes. Herein, we report our attempt to carry out a sensitivity comparison of immunodiagnostic assays for dengue fever in dengue positive patients. Blood samples from 189 volunteers were collected. To determine the sensitivity of the NS1 test, two different types of tests-immunochromatographic tri-line test and rapid dengue test (RDT)-as well as IgM and IgG capture ELISA were performed. The result of RDT has shown that 59.7% of volunteers were IgM positive and 50.2% were IgG positive. Conversely, the results from capture ELISA shows 79.8% and 59.7% for IgM and IgG, respectively. The sensitivity of the capture ELISA test for IgM and IgG was higher than that of immunochromatographic tri-line rapid test, but the specificity was lower. Therefore, to confirm dengue fever, we recommend performing more detailed, investigative tests since a single test may not be sufficient.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.73-88
• /
• 2014

Various studies on the critical flow models for sub-cooled and/or saturated water were reviewed, especially on Fauske, Moody, and Henry for basic theoretical models; Zaloudek for insight into physical phenomena for a critical flow in an orifice type flow path; Sozzi & Sutherland for a critical flow test of saturated and sub-cooled water at high pressure for orifice and nozzles; and a Marviken test on a full-scale critical flow test. In addition, critical flow tests of sub-cooled water for the break simulators in integral effect test (IET) facilities were also investigated, and a hybrid concept using Moody's and Fauske's models was considered by the authors. In the comparison of the models for the selected test data, discussions of the effect of the diameters, predictions of the critical flow models, and design aspects of break simulator for SBLOCA scenarios in the IET facilities were presented. In the effect of diameter on the critical flow rate with respect to all dimensional scales, it was concluded that the effect of diameter was found irrespective of diameter sizes. In addition, the diameter effect on slip ratio affecting the critical flow rate was suggested. From a comparison of the critical flow models and selected test data, the Henry-Fauske model of the MARS-KS code was found to be the best model predicting the critical flow rate for the selected test data under study.

• Journal of Korean Biological Nursing Science
• /
• v.12 no.3
• /
• pp.157-165
• /
• 2010

Purpose: The purpose of this study was to examine the effects of recreation combined exercise program on body composition, physical fitness and depression in elderly women in rural district over a three-month follow-up period. Methods: Recreation combined exercise program (RCEP) was composed of resistance exercise, walking and recreation activity twice a week. The subjects were 52 divided in to experimental group (n=28) and control group (n=24). Arm curl, chair stand, 2 min step test, back scratch, chair sit and reach were measured as pre- or post-test data. Also, Depression was expressed using geriatric depression scale as pre- or post-test data. $X^2$ test, paired t-test and t-test were performed using SAS program. Results: Arm curl (p=.023), 2 minute step test (p<.001), back scratch (p=.004) and chair sit and reach (p=.024) showed the significant difference in the comparison between groups. Depression showed the significant difference in the comparison between groups (p=.008). Conclusion: These findings indicated the RCEP has positive influence upon increasing the physical fitness and improving the depression level. In conclusion, the regular RCEP will contribute to the improving physical and psychologic aspect in elderly women over the long period.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.995-996
• /
• 2012

• Proceedings of the Korean Society of Rheology Conference
• /
• 2001.09a
• /
• pp.159.2-159
• /
• 2001