• 한국정보시스템학회지:정보시스템연구
• /
• 제28권4호
• /
• pp.49-64
• /
• 2019

Purpose The purpose of this paper is to observe the relative priorities of importances among IT services for Smart tourism as well as the relative priorities of importances among ways for developing the IT Services. Design/methodology/approach AHP analysis model was designed with 3 layers in order to recognize the relative importances priorities of IT services and the ways developing the IT services in Smart tourism. The factors in the top layer consist of Pre-trip IT services, During-trip IT services and Post-trip IT services. The lower factors in second layer of the Pre-trip IT services consists of Tourism information search, Online reservation and Price comparison. The lower factors of the During-trip IT services consists of Context recognition, Virtual Reality and Drone Application. The lower factors of the Post-trip IT services consists of Interactive Sharing and Tagging. The factor of third layer, the ways of developing the IT services consist of Company leading, University leading and Industry-University Collaboration. The structural questionnaire based on the AHP analysis model was designed and used to survey experts in IT and tourism areas. The collected data by the question investigation was analyzed by AHP analysis technique. Findings The importance priority of During-trip IT service was highest among in the three type IT services of tourism life cycle. The importance priority of Price comparison service was highest among IT services for Pre-trip. The importance priority of the Context recognition service was highest among IT services for During-trip. The Interactive sharing service was highest among IT services for Post-trip. It would be confirmed for the IT service development ways of Company leading to be suitable for most of the It services, such as Tourism information search, Online reservation, Price comparison, Context recognition, Virtual reality, Drone application, Interactive sharing.

• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.194-201
• /
• 2017

EFD-CFD 비교 워크샵 case 1의 모델로 한국항공우주연구원에서 개발된 KARI-11-180 익형이 선정되었다. 익형 풍동시험은 $0.6m{\times}3.0m$ 모델을 사용하여 KARI LSWT에서 최대 레이놀즈수 3.0E6까지 수행되었다. 익형 형상 및 Cl, Cd 그리고 Cp를 포함한 시험자료가 2015년 KSAS 춘계학술대회에서 공개되었으며, KFLOW, FLUENT 및 STAR-CCM+를 사용한 전산유체해석결과가 2015년 KSAS 추계학술대회에서 공개되었다. 본 논문에는 2015년 발표된 시험 및 전산해석결과를 요약하여 수록하였으며, 시험결과를 포함한 전산해석 결과들 간의 비료결과도 요약수록 하였다.

• Smart Structures and Systems
• /
• 제26권4호
• /
• pp.403-418
• /
• 2020

In recent years, the use of Fiber Reinforced Polymers (FRPs) as one of the most common ways to increase the strength of concrete samples, has been introduced. Evaluation of the final strength of these specimens is performed with different experimental methods. In this research, due to the variety of models, the low accuracy and impact of different parameters, the use of new intelligence methods is considered. Therefore, using artificial intelligent-based models, a new solution for evaluating the bond strength of FRP is presented in this paper. 150 experimental samples were collected from previous studies, and then two new hybrid models of Imperialist Competitive Algorithm (ICA)-Artificial Neural Network (ANN) and Artificial Bee Colony (ABC)-ANN were developed. These models were evaluated using different performance indices and then, a comparison was made between the developed models. The results showed that the ICA-ANN model's ability to predict the bond strength of FRP is higher than the ABC-ANN model. Finally, to demonstrate the capabilities of this new model, a comparison was made between the five experimental models and the results were presented for all data. This comparison showed that the new model could offer better performance. It is concluded that the proposed hybrid models can be utilized in the field of this study as a suitable substitute for empirical models.

• Geomechanics and Engineering
• /
• 제27권5호
• /
• pp.447-463
• /
• 2021

Caisson-type structures are widely used as quay walls in coastal areas. In Korea, for a long time, many caisson-type quay walls have been constructed with a low front water depth. These facilities can no longer meet the requirements of current development. This study developed a new technology for deepening existing caisson-type quay walls using grouting and rubble mound excavation to economically reuse them. With this technology, quay walls could be renovated by injecting grout into the rubble mound beneath the front toe of the caisson to secure its structure. Subsequently, a portion of the rubble mound was excavated to increase the front water depth. This paper reports the results of an investigation of the seismic behavior of a renovated quay wall in comparison to that of an existing quay wall using centrifuge tests and numerical simulations. Two centrifuge model tests at a scale of 1/120 were conducted on the quay walls before and after renovation. During the experiments, the displacements, accelerations, and earth pressures were measured under five consecutive earthquake input motions with increasing magnitudes. In addition, systematic numerical analyses of the centrifuge model tests were also conducted with the PLAXIS 2D finite element (FE) program using a nonlinear elastoplastic constitutive model. The displacements of the caisson, response accelerations, deformed shape of the quay wall, and earth pressures were investigated in detail based on a comparison of the numerical and experimental results. The results demonstrated that the motion of the caisson changed after renovation, and its displacement decreased significantly. The comparison between the FE models and centrifuge test results showed good agreement. This indicated that renovation was technically feasible, and it could be considered to study further by testbed before applying in practice.

• 한국CDE학회논문집
• /
• 제21권1호
• /
• pp.78-89
• /
• 2016

When a plant owner requests plant 3D CAD models in the format that a shipbuilding company does not use, the shipyard manually re-models plant 3D CAD models according to the owner's requirement. Therefore, it is important to develop a technology to compare the re-modeled plant 3D CAD models with original ones and to quantitatively evaluate similarity between two models. In the previous study, we developed a graphic user interface (GUI)-based comparison system where a user evaluates similarity between original and re-modeled plant 3D CAD models for piping design at the level of unit. However, an offshore plant consists of thousands of units and thus a system which compares several plant 3D CAD models at unit-level without human intervention is necessary. For this, we developed a new batch model comparison system which automatically evaluates similarity of several unit-level plant 3D CAD models using an extensible markup language (XML) file storing file location and name data about a set of plant 3D CAD models. This paper suggests system configuration of a batch-mode-based comparison system and discusses its core functions. For the verification of the developed system, comparison experiments for offshore plant 3D piping CAD models using the system were performed. From the experiments, we confirmed that similarities for several plant 3D CAD models at unit-level were evaluated without human intervention.

• 한국해안해양공학회지
• /
• 제19권2호
• /
• pp.162-169
• /
• 2007

본 연구는 갑문 개방시 유출부의 흐름 현상을 수리모형실헐 결과와 3차원 수치모형실험을 비교 분석하는데 역점을 두고 있다. 대상 갑문은 군장(군산-장항)국가산업단지내의 솔리천에서 유입되는 홍수량 $218m^3/s$을 배제하기 위해서 설계된 배수갑문이다. 수치실험에 사용된 모형은 상용 전산유체역학 프로그램인 ANSYS CFX-10의 ${\kappa}-{\epsilon}$ 난류모형이다. CFX-10의 장점은 난류 흐름에 대해 현상을 양호하게 시뮬레이션 할 수 있으며 특히 물과 공기 접촉면(two phase interface)인 경계층에서 흐름 분리현상을 비교적 뚜렷하게 해석할 수 있다. 수치실험에서 해석된 유속 및 수면의 흐름 형태는 수리모형실험과 유사하게 나타났다.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.117-130
• /
• 1989

In this study, an implicit one-dimensional model, DWRM(Dynamic Wave Routing Model) was developed by using the four-point weighted difference method. By applying the developed model to the Keum River, the parameters were calibrated and the model applicability was tested through the comparison between observed and computed water levels. In addition, the effects of the construction of an estuary dam to the flood wave were estimated as a result of the model application. The results of the study can be summarized as follows; 1. The roughness coefficients were evaluated by comparison between observed and computed water level at Jindu, Gyuam and Ganggyeung station in 1985. The Root Mean Squares for water level differences between observed and computed values were 0.10, 0.11, 0. 29m and the differences of peak flood levels were 0.07, 0.02, 0. 07m at each station. Since the evaluated roughness coefficients were within the range of 0.029-0.041 showing the realistic value for the general condition of rivers, it can be concluded that the calibration has been completed. 2. By the application of model using the calibrated roughness coefficients, the R. M. S. for water level differences were 0.16, 0.24, 0. 24m and the differences of peak flood level were 0.17, 0.13,0.08 m at each station. The arrival time of peak flood at each station and the stage-discharge relationship at Gongju station agreed well with the observed values. Therefore, it was concluded that the model could be applied to the Keum River. 3. The model was applied under conditions before and after the construction of the estuary dam. The 50-year frequency flood which had 7, 800m$^3$/sec of peak flood was used as the upstream condition, and the spring tide and the neap tide were used as the downstream condition. As the results of the application, no change of the peak flood level was showed in the upper reaches of 19.2km upstream from the estuary dam. For areas near 9.6km upstream from the estuary dam, the change of the peak flood level under the condition before and after the construction was 0. 2m. However considering the assumptions for the boundary conditions of downstream, the change of peak flood level would be decreased.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.129-136
• /
• 2006

그리드 컴퓨팅은 단일 컴퓨터로는 해결할 수 없는 대용량의 작업을 처리하기 위해 제안되었다. 그리드 컴퓨팅은 지리적으로 분산된 이기종 자원들을 상호 연결하여 대용량의 작업들을 처리하는 새로운 차세대 컴퓨팅이다. 그런데, 분산된 이기종의 자원들을 모을 때에 많은 어려운 문제들이 발생한다. 특히, 자원들의 신뢰성을 보장하는 것은 가장 심각한 문제 중에 하나이다. 그래서 우리는 그리드 자원의 신뢰성을 측정하여 자원을 할당하는 그리드 자원 신뢰성 측정 스케줄링 모델을 제안한다. 우리는 자원의 상태 정보를 기반으로 하여 자원 신뢰성을 측정하고, DEVSJAVA 모델링과 시뮬레이션 환경에서 그리드 시뮬레이션 모델에 그리드 자원 신뢰성 측정 방법을 적용하였다. 그리고, 이 논문은 스케줄링 모델들의 Utilization, Job loss, Throughput 그리고 Average Turn-around Time 같은 파라미터들을 측정하였고, 자원 신뢰성 측정을 이용한 그리드 자원 신뢰성 측정 스케줄링 모델의 실험 결과들을 기존의 스케줄링 모델들(랜덤 스케줄링 모델, 라운드 로빈 스케줄링 모델)과 비교하였다. 이 실험 결과들은 자원 신뢰성 측정 스케줄링 모델이 랜덤 스케줄링 모델과 라운드 로빈 스케줄링 모델에 비해 효율적인 자원 할당과 안정적인 작업 처리를 제공한다는 것을 보여준다.

• 한국사회복지학
• /
• 제38권
• /
• pp.33-67
• /
• 1999

This study is the second phase of the author's larger attempt to investigate the factors affecting housewives' caregiving behavior to their elderly parents-in-law. Specifically, it revises and expands the previous model (1998) and develops a new one by rectifying the three major problems inherent in the previous study: (1) misspecification error; (2) non-equivalent comparison of results between the father-in-law model and mother-in-law model that stems from the inclusion of heterogeneous group of caregivers; (3) measurement problems for the two endogenous variables of eldercare attitude and behavior. To do this, the current study proposes a more comprehensive model by additionally incorporating other salient exogenous variables, renders the comparison of results between the father-in-law and mother-in-law models equivalent by including only homogeneous group of caregivers (i. e., only those housewives whose parents-in-law are both alive), and introduces standardized measurement scales for the endogenous variables. Estimation of the model in terms of maximum likelihood procedures in LISREL8 attests to a better overall performance over the previous model when judged from several criteria such as coefficient of determination, model fit statistics, proportion of significant causal paths, and measurement properties of reliability and validity for the variables. Interpretation of the findings suggests several salient theoretical implications that concern such crucial issues as the inconsistency between eldercare attitude and behavior, patterns of association among the subdimensions of eldercare, and the difference in the antecedents explaining attitude as opposed to behavior of eldercare. In particular, the finding that indicates almost no differences in the determinants between the father-in-law and mother-in-law models suggests a strong case to argue that caregiving behavior to fathers-in-law and mothers-in-law, respectively, is likely to be a uniform phenomenon sharing virtual1y the same antecedents, and that a unified single model is sufficient to account for caregiving behavior to both parties.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.147-147
• /
• 2019

The Numerical Weather Prediction (NWP) models determine the future state of the weather by forcing current weather conditions into the atmospheric models. The NWP models approximate mathematically the physical dynamics by nonlinear differential equations; however these approximations include uncertainties. The errors of the NWP estimations can be related to the initial and boundary conditions and model parameterization. Development in the meteorological forecast models did not solve the issues related to the inevitable biases. In spite of the efforts to incorporate all sources of uncertainty into the forecast, and regardless of the methodologies applied to generate the forecast ensembles, they are still subject to errors and systematic biases. The statistical post-processing increases the accuracy of the forecast data by decreasing the errors. Error prediction of the NWP models which is updating the NWP model outputs or model output statistics is one of the ways to improve the model forecast. The regression methods (including linear, polynomial and scaling regression) are applied to the present study to improve the real time forecast skill. Such post-processing consists of two main steps. Firstly, regression is built between forecast and measurement, available during a certain training period, and secondly, the regression is applied to new forecasts. In this study, the WRF real-time forecast data, in comparison with the observed data, had systematic biases; the errors related to the NWP model forecasts were reflected in the underestimation of the meteorological data forecast by the WRF model. The promising results will indicate that the post-processing techniques applied in this study improved the meteorological forecast data provided by WRF model. A comparison between various bias correction methods will show the strength and weakness of the each methods.