• 건축역사연구
• /
• 제12권2호
• /
• pp.21-39
• /
• 2003

After a digital modelling method has been introduced into architectural design in 1990s, a radical change was taken place in generating architectural form and space. Many architects have a view that digital modelling method is the most Important invention in the visual presentation since the moment that architect Philippo Brunelleschi experimented initially the linear perspective. Therefore, in this study, comparing between perspectiva artificialis and digital modelling method, we clarify 1) the relationship of architectural design and presentation method, 2) the practical and philosophical background inherent in digital modelling method which played key role in developing non-representational architecture, 3) and the principles of non-representational architecture like diagram, folding, and trace.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.898-901
• /
• 2005

We propose a novel pixel structure using bootstrapped voltage programming for amorphoussilicon TFT backplane of AM-OLED (Active Matrix-Organic Light Emitting Diode) displays. The proposed structure is composed of two TFTs and one capacitor. It operates at low drive voltage ($0{\sim}5V$) which can reduce power consumption comparing with the conventional pixel circuit structure using same OLED material. Also, it can easily control dark level and use commercial mobile LCD ICs. In this paper, we describe the operating principle and the characteristics of the proposed pixel structure and verify the performance by SPICE simulation comparing with the conventional pixel structure.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권4호
• /
• pp.216-223
• /
• 2006

In this paper, a methodology for the efficiency improvement of the photovoltaic system without adding some elements or increasing the cost comparing with the conventional system is discussed. It is suggested the optimal photovoltaic module configuration through its performance analysis, and also the suitable maximum power point tracking (MPPT) voltage considered the system cost and the efficiency of the converter. The high efficiency photovoltaic system by using the parallel power transfer (PPT) based MPPT converter is proposed and analyzed theoretically comparing with the conventional Buck type MPPT converter. Finally, it is designed and implemented the proposed photovoltaic system for supplying DC 48V by using the PPT based MPPT converter. And the effect of the efficiency improvement and the usefulness of the proposed system is proved through some preliminary simulation and experiment results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.110-113
• /
• 1993

The MOSFET synchronous rectification in the Active-Clamp Forward converter is presented. The Active-Clamp Forward converter has little dead time during the off time of the main switch and it is suitable for the MOSFET synchronous rectification comparing to the other Forward converter topologics. Using the MOSFET synchronous rectification on the Active-Clamp Forward converter with 3.3[V] output and 500[kHz] switching frequency, the improvement of efficiency is achieved comparing with the conventional Schottky barrier diode rectification.

• 음성과학
• /
• 제12권1호
• /
• pp.65-74
• /
• 2005

The aim of this paper is to suggest an index of coarticulation, proportional undershoot values, given the observation that absolute undershoot within a language tends to be proportional to target-locus difference. The target-locus proportionality predicts that a large difference between the consonant locus and the vowel target will result in a large amount of vowel undershoot, while a small difference a small amount of vowel undershoot. It turns out that the proportional undershoot is a potentially more appropriate way of comparing degree of undershoot across languages. However, even though the proportional undershoot measurement may provide a useful index comparing the overall coarticulation degree in a CV token for cross-linguistic data, it is concluded that it may potentially wrongly predict the cases of transfer or error as a progress in learning.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.78-88
• /
• 1992

To improve the characteristics of sub$\mu$m short channel MOSFET device, a new device having the convex structure is proposed. This device has 3-dimensionally expandable channel length according to the vertical etched silicon height. For the purpose of comparing the DC and AC characteristics, planar device is also fabricated. Comparing the channel length, the convex device with 0.4$\mu$m silicon height is larger about 0.56$\mu$m in NMOS and 0.78$\mu$m in PMOS than planar devices. DC characteristics, such as threshold voltage, operational current, substrate current and breakdown voltage are compared together with AC characteristics using the ring oscillator inverter delay. Also process and device simulation are performed and the differences between convex and pranaldevice are also compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.419-424
• /
• 2001

The purpose of this study is comparing cold expansion method with interference fit. Cold expansion method and interference fit of fastener hole is using in the aerospace industry. These treatment lead to an improvement of fatigue life to the compressive residual stresses developed on the hole surface. But Research is nothing to about difference effect of between cold expansion method and interference fit. So In this paper, It is shown that Comparing cold expansion method with interference fit. and It is further shown that residual stress distribution according to plate thickness.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.809-818
• /
• 1997

An efficient non-recursive formulation of dynamic force analysis has been developed for serially connected multibody systems. Although derivation of equations of motion is based on a recursive dynamic formulation with joint relative coordinates, in the proposed formulation, dynamic forces such as joint reaction forces and driving force are computed non-recursively for specified joints. The efficiency of the proposed formulation has been proved by the operational count and the CPU time measure, comparing with that of the conventional recursive Newton-Euler formulation. A simulation of 7-DOF RRC robot arm has been carried out to validate solutions of reaction forces by comparing with those from a commercial dynamic analysis program DADS.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.396-400
• /
• 2003

This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design condidering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verifiedthe test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirmn approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective method in thermal-appropriate design..

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.722-728
• /
• 2001

Applying a general coupled lateral and torsional vibration finite element model of gear pair element this paper intends to look into in detail the coupled lateral and torsional vibration characteristics in a turbo-chiller rotor bearing system, having a bull-pinion speed increasing gear. Investigations have been carried out systematically by comparing the uncoupled and coupled analyses natural vibration frequencies and their mode shapes upon varying the gear mesh stiffness, and also by comparing the strain energies of lateral and torsional vibration modes. Results have shown that some modes may have coupled lateral and torsional mode characteristics as the gear mesh stiffness increases over a certain value, and moreover that their associated dominant modes may be different from their initial modes, i.e., the dominant mode changes from an initial torsional one to a lateral one or from an initial lateral one to a torsional one.