• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1752-1755
• /
• 2016

본 논문에서는 "축구 동영상"의 배경 분리 정확도 향상을 위한 "최적의" 수학적 모폴로지 연산자를 결정하기 위하여 정량적인 비교 평가 연구를 수행하였다. 이를 위해 본 논문에서는 여섯 가지 서로 다른 수학적 모폴로지 연산자를 동일한 실험 환경에서 비교 평가하였다. F-measure를 이용하여 평가한 결과 복구에 의한 닫기-복구에 의한 열기 연산자가 최적의 연산자임을 확인하였다. 본 논문에서 제시된 정량적 비교 평가 결과는 지능형 축구 동영상 분석 시스템 개발을 위해 배경 분리 기술을 이용하거나 축구 동영상에 특화된 배경 분리 기술을 연구하고자 하는 연구자 및 개발자들에게 실질적인 도움이 될 것으로 판단된다.

• Elastomers and Composites
• /
• 제38권1호
• /
• pp.27-37
• /
• 2003

This work presents a comparative study of the morphology and structure related properties of thermoplastic elastomer blends based on SEBS/PP/Oil and dynamically vulcanized EPDM/PP/Oil. A combination of ruthenium oxide staining and low voltage scanning electron microscopy (LVSEM) was found to be suitable for the study of morphology of these highly oil extended blends. h close analogy was found in the mechanical, thermal and rheological properties of the two systems made in an internal Brabender mixer and co-rotating turin screw extruder. The morphology of the blends, as made by the two techniques, was found to be significantly different. In the case of TPVs, the blonds made in the extruder had smaller EPDM domains and better tensile properties. In the case of SEBS, the blends made in the Brabender had more co-continuous phases and showed better tensile properties. Crystallization behavior of the isotactic polypropylene in the blends was found to be influenced by the type of rubber. Blends of SEBS/PP crystallized at a lower temperature than the TPVs. These differences were probably caused by differences in the nucleating ability of the two rubbers.

• 한국물환경학회지
• /
• 제33권3호
• /
• pp.302-310
• /
• 2017

The morphological characteristics of granules developing in anaerobic-anoxic (An-Ax) and anaerobic-aerobic (An-Ox) sequencing batch reactors (SBRs) were examined. The granules developed in the both SBRs after 200 days of laboratory operation. The average diameters of the granules were $2.2{\pm}1.7mm$ in the An-Ax SBR and $0.4{\pm}0.3mm$ in the An-Ox SBR. To determine the possible factors affecting morphology of granules a comparative analysis of various operating conditions from reference data indicated that the availability and type of electron acceptors is a key factor determining the granulation process and granular morphology.

• Journal of Plant Biology
• /
• 제36권2호
• /
• pp.141-149
• /
• 1993

Comparative morphology of winter buds of 16 species of gymnosperms which belong to six families and 13 genera was investigated. All the species examined except Taxaceae had bracts and ovuliferous scales in female buds, and the bract was fused with ovuliferous scale in various degrees. Comparison of the modern conifers with fossil ones in the position of ovule and structure of bract-scale complex suggested that Taxaceae should be placed in Coniferales, rather than treating as a distinct order. The disposition of bract surrounding the ovules of Cephalotaxus and Torreya indicated that the origin, of ovules had separate evolutionary line in spite of similar structure of female bud. The shape of microsporophyll in male bud was diverse among the species. The dehiscence of microsporangium was transverse in Abies and Tsuga, while longitudinal in other species. Descriptions and key to the species based on bud morphology were provided.

• 식물분류학회지
• /
• 제49권2호
• /
• pp.107-117
• /
• 2019

Viburnum in Korea includes ten species. The phylogenetic relationships and morphology of the genus Viburnum in general have been studied substantially for the past three decades. A clear understanding of the systematic relationships and an assessment of the level of morphological variation of these plants distributed in Korea are lacking. This study investigated the morphology of these species using herbarium specimens and fresh materials obtained during fieldwork to examine the morphological variation level for a better understanding of each species in the genus. A comparative analysis showed that the species of Viburnum in Korea are easily distinguishable based on various characters of the bud, leaf, extrafloral nectary, inflorescence, corolla, fruit, and stone.

• 한국자원식물학회지
• /
• 제8권3호
• /
• pp.223-235
• /
• 1995

조사된 금강초롱꽃과(科) 근연 분류군 4속 9분류군에 대하여 외부형태학적 형질을 재검토하고 해부학적 형질을 통하여 종간 분류 및 금강초롱꽃속(屬)이 특산속으로서 구별이 가능한가를 알아보았다. 연구결과, 외부형태에 있어서는 뿌리의 모양, 잎의 형태, 엽병의 날개 유무, 화관의 형태, 꽃받침의 형태, 엽병의 날개 유무, 화관의 형태, 꽃받침의 형태, 화서의 형태, 주두의 형태 등이 식별 형질로서 가치가 인정되었으며 해부학적 형질에서는 횡단면의 내부구조 보다는 표피의 돌출정도와 돌출 수가 종간 구별을 위한 형질로 생각되어진다. 이번 조사를 통하여 금강초롱꽃속(屬)은 외부형태 및 해부학적 형질에서 유사 분류군들과 잘 구분되어 특산속으로서 잘 지지되었으며 기존의 학자들(Fedorov, 1957; Nakai, 1952; Hong, 1983)에 의해 분류형질로 인식되어온 엽서와 화서의 형태, 화관의 형질 들이 이번 연구에서도 속, 종을 구별하는데 매우 유용한 형질로 나타났다.

• Journal of Plant Biology
• /
• 제34권3호
• /
• pp.229-238
• /
• 1991

The main objective of this study was to clarify the taxonomic status and the speciation mechanism of Viola albida complex in Korea. The complex includes three very closely related taxa, taxonomic ranks of which are much in dispute. These taxa in the complex are sympatric in distribution, and they are very similar in most morphological characteristics. Comparative morphological analyses revealed that they can be distinguished on the basis of leaf shape, although they show complicated patterns of variation in leaf shape. The variation of leaf shape in each taxon appeared to be maintained through developmental process, and extensive cleistogamy and vegetative reproduction in these taxa are suggested as the mechanisms maintaining the variation. Genetic variation in this complex was monomorphic in all 14 loci examined. Palynological study also showed that these taxa have the same pollen morphology. These results strongly suggested that they should be recognized as varieties of V. albida; var, albida, var. chaerophylloides, and var. takahashii. The results also suggested that some individuals that can be assigned to var. takahashii might be hybrids between var. albida and var. chaerophylloides.

• 한국응용곤충학회지
• /
• 제31권2호
• /
• pp.153-169
• /
• 1992

본 연구는 바구미과(Curculionidae)의 노랑무늬솔바구미(Pissodes nitidus), 노랑점검바구미(Pissodes obscurus), 흰점박이바구미(Shirahoshizo insidiosus), 밤바구미(Curculio sikkimensis), 버들바구미(Cryptorhynchus lapathi) 그리고 거위벌레과(Attelabidae)의 거위벌레(Apderus jekeli), 단풍나무거위벌레(Byctiscus puberulus regalis), 투리거위벌레(Euops splendidus), 복숭아거위벌레(Rhynchites heros) 그리고 왕바구미과(Rhynchophoridae)의 왕바구미(Sipalinus gigas) 유충의 형태학적 특성을 관찰하였다.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.205-217
• /
• 2014

Purpose: This study will examine the differences among the college dental morphology textbooks in light of their contents and learning objectives through which we will propose an optimal way of consolidating those differences found. Methods: Five college textbooks adopted in the dental related departments were selected by random and the overview and subdivisions of contents were compared and closely analysed with regards to the learning objectives. Results: Firstly, all of the dental morphology textbooks cover the learning objectives of the dental morphology subject, especially in the area of the overview of dental morphology, the permanent tooth, deciduous tooth. Only the dentistry textbooks explain the learning objective of the occlusion. Secondly, differences in content were found in the area of component tissue and around tissue, dental formula of deciduous teeth, spinous process, buccal pit, enamel projection, curve symbol, tip of cusp position of proximal surface of permanent mandibular canines, buccal cusp position of permanent mandibular second premolars. Conclusion: It is imperative to delineate some meaningful and critical differences in contents among the dental morphology textbooks and reflect this to each and every textbook to be published as a supplementary information guide or index.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.305-316
• /
• 2015

The study of grinding behavior characteristics on the metal powders has recently gained scientific interest due to their useful applications to enhance advanced nano materials and components. This could significantly improve the property of new mechatronics integrated materials and components. So, a new evaluation method for standardizing grinding equipment and a comparative study for the grinding experiment during the grinding process with various grinding mills were investigated. The series of grinding experiments were carried out by a traditional ball mill, stirred ball mill, and planetary ball mill with various experimental conditions. The relationship between the standardization of equipment and experimental results showed very significant conclusions. Furthermore, the comparative study on the grinding experiment, which investigated changes in particle size, particle morphology, and crystal structure of materials with changes in experimental conditions for grinding equipment, found that the value of particle size distribution is related to the various experimental conditions as a revolution speed of grinding mill and media size.