• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.11-20
• /
• 2013

PURPOSES : This study is to develop a method to evaluate the compaction effects of asphalt binders using WMA additives and compare their compaction effects on two types of WMA additives, two types of testing temperatures, and three types of asphalt film thicknesses. METHODS : This study is based on laboratory experiments and rheological analysis of the experimental results. Testing materials are aggregate disks, asphalt, and WMA additives. The main testing method is the stress sweep test by using dynamic shear rheometer (DSR). In addition, the testing parameters obtained from the stress sweep results to evaluate lubrication effects are complex modulus and LVE-Limit. RESULTS : At both the first compaction condition ($110^{\circ}C$, 0.3mm) and second compaction condition ($80^{\circ}C$, 0.2mm) assumed, LEADCAP showed better compaction effects than Sasobit. CONCLUSIONS : The temperature $30^{\circ}C$ lower than general compaction temperatures can provide a better sensitivity for the evaluation of compaction effects. If a testing temperature and film thickness are grouped for the proper compaction conditions in the testing results, the compaction performance of each WMA additive can be more clearly discriminated in the grouped testing results matched with the grouped conditions.

• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.67-84
• /
• 2005

본 연구는 포화된 연약 점성토에 대한 보강효과를 분석하기 위하여 롤러 다짐장비를 사용하여 수행하였다. 시료는 12시간 수침으로 포화 상태를 만들었으며, 철재 롤러로 평면변형을 상태에서 5cm 층 두께로 4층의 다짐을 실시하였다. 보강효과를 분석하기 위하여 무보강 조건 및 부직포와 직포로 구성된 복합보강재를 사용한 보강조건으로 다짐 공시체를 제작하였다. 복합보강재의 배수효과와 인장 보강효과로 고함수비 점성토의 지지력을 증가시켜, 보강토에 대하여 큰 다짐하중을 가할 수 있게 되어 보다 큰 밀도를 효과적으로 얻을 수 있다. 또한 다짐 작업시 보강재에 의해 연직재하 하중에 대한 전단저항 반력의 감소에 의해 다짐효율을 증가시킨다. 공시체 저면에서의 최대 연직응력은 다짐두께가증가 할수록 감소하게 된다. 한편 보강재는 롤러의 연직하부의 지반강성을 증가시켜 응력집중현상이 발생한다. 이로인하여 공시체 저면에서 보다 높은 연직응력 수준을 유지하며 보다 효과적인 다짐 특성을 제공하게 된다. 시험결과로부터 연약점성토의 효과적인 다짐을 위해서는 보강재가 필수적으로 요구된다고 할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.11-14
• /
• 2004

The object of this study is vibrating compaction and curing method in the production process of Design concrete for precast concrete(Design-PC) product. From change of vibrating compaction time and pre-curing time. curing temperature which would be factors of product quality in Design-PC concrete production. and research of optimized steam curing condition from relations between curing condition and strength development. basic data of vibrating compaction time and concrete steam curing method for Design-PC will be presented.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.357-364
• /
• 2002

This paper describes the feasibility of compacting subgrade layer in thicker lifts than currently permitted as 20 cm. This project involved constructing and testing a full scale test section in highway. Soil stiffness in field was evaluated by a nondestructive testing method, called Geogage. Quality control tests and FE Analysis were also conducted. Typical dynamic compaction roller of 11ton weight is applied for full scale test and a Mohr-Coulomb model and Plane strain condition are used for FE Analysis. The results showed that compaction-induced stress and dissipated energy are mainly depend on depth of soil and it could be possible to increase thickness of a lift.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.82-95
• /
• 1989

This study was carried out for the stability analysis of earth dam by the variation of compaction density. The test samples were taken from five kinds of soil used for banking material and the degree of compaction for this samples were chosen 100, 95, 90, 85, and 80 percent. The stability problems were analysed by the settlement and camber( extra banking) of dam, strength parameter and dam slope, and coefficient of permeability and seapage flow through dam body. The results of the stability analysis of earth dam are as follows. 1. The more the fine particle increases and lower the compaction degree becomes, the lower the preconsolidation load becomes but the compression index becomes higher. 2. Sixty to eighty percent of settlement of dam occurs during the construction period and the settlement ratio after completion of dam is inversly proportional to the degree of compaction. 3. The camber of dam has heigher value in condition that it has more fine particle(N) and heigher dam height(H) with the relation of H= e(aN-bH-e). 4. The cohesion(C) decreases in proportion to compaction degree(D) and fine particle(N) with the relation of C= aD+ bN-c, but the internal friction angle is almost constant regardless of change of degree of compaction. 5. In fine soil, strength parameter from triaxial compression test is smaller than that from direct shear test but, they are almost same in coarse soil regardless of the test method. 6. The safety factor of the dam slope generally decreases in proportion to cohesion and degree of compaction but, in case of coarse soil, it is less related to the degree of compaction and is mainly afected by internal friction angle. 7. Soil permeability(K) decreases by the increases of the degree of compaction and fine particle with relation of K=e(a-bl)-cN) 8. The more compaction thickness is, the less vertical permeability (Kv) is but the more h6rzontal permeability (KH) is, and ratio of Kv versus KH is largest in range from 85 to 90 percent of degree of corn paction. 9. With the compaction more than 85 percent and coefficient of permeability less than ${\alpha}$X 10-$^3$cm/sec, the earth dam is generally safe from the piping action.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.289-292
• /
• 2003

CFRD face slab concrete has a much capability to occur crack due to drying shrinkage and vibrator compaction etc. Because crack of concrete induces structural problem and decrease durability of concrete, it is need to reduce crack of concrete. In the experimental study it was analyzed that the effect of curing of concrete and compaction on CFRD face slab concrete. As a results, it was found that control of construction condition into curing of concrete and compaction improved on construction efficiency of face slab concrete.

• 소성∙가공
• /
• 제7권2호
• /
• pp.114-126
• /
• 1998

A plasticity theory applicable to the powdered metal compaction is briefly summarized and its varia-tional form for the finite element analysis is described. The compaction processes of axisymmetric solid cylinder are simulated. For the analysis of the friction effect on compaction process the investigations were performed for different compact geometries. Efforts are focused on the transmitted pressure through the compact and density distributions within the compacts. Numerical results show that :(1) the friction coefficient could be selected simply from the transmitted force data by the single acting compaction test and the simulated results ; and (2) density variations within the compacts rely on the compact geometry such as height to diameter ration and the frictional condition between compact and dies.

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.859-864
• /
• 2006

For the pressure compaction process of the ceramic powder, the green density is very different with both the ceramic body shape and the processing conditions. The density difference cause non-uniform shrinkages and deformations, and make cracks in the sintered ceramics. In this paper, Material properties of the alumina powder mixed with binder and the friction coefficient between the powder and the tool set were determined through the simple compaction experiments: Also the powder flow characteristics were simulated and the green density was analyzed during the powder compaction process with Finite Element Method (FEM). The results show that the density distributions of the green body were improved at the optimized processing condition and both the possibility of the farming crack generation and rho deformation of the sintered Alumina body were reduced.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.163-171
• /
• 2001

콘크리트 구조물과 토공의 인접부인 구조물 뒷채움의 구조적 연속성을 위해서는 뒷채움 시공이 중요하다. 뒷채움부의 구조적 연속성을 증가시키기 위해서는 양질의 뒷채움재 사용과 대형 진동다짐장비에 의한 정밀다짐이 효과적이다. 그러나 정밀다짐시에 발생하는 과도한 토압에 의해 암거 구조물에 구조적 결함이 발생할 수 있다. 본 연구에서는 다짐재와 다짐방법을 변화시키면서 2개소의 암거를 건설하였다. 뒷채움재로는 선택층재와 노상토재를 사용하였다. 뒷채움 다짐시에 큰 다짐에너지를 얻기 위하여 대부분의 경우 총중량 11~12톤의 다짐롤러를 2000rpm 에서 2400rpm의 주파수로 적용하였다. 노상토를 사용하여 뒷채움 시공을 하는 경우에는 충격완화재를 설치하여 동적 수평하중에 미치는 영향을 분석하였다. 충격완화재로는 EPS재와 타이어 칩을 사용한 패널들을 사용하였으며, 뒷채움 시공시에 이들 충격완화재를 암거의 외벽체에 부탁하였다. 본 논문에서는 콘크리트 암거의 뒷채움 시공시에 발생하는 동적지응력 특성을 기술하였다. 계측 결과, 다짐하중에 의한 수직토압과 수평토압의 크기는 다짐재료, 다짐 측정깊이 및 다짐방법에 의존하고 있었다. 뒷채움 다짐시에는 정적토압계수 보다 큰 동적토압계수$(\DeltaK_{dyn}=\DeltaK\sigma_h\DeltaK\sigma_v)$를 나타내고 있어 동적토압에 의해 암거에 유해한 영향을 줄 수 있다. 충격완화재 EPS(t=10cm)와 고무계(t=5cm)는 암거 벽체에 작용하는 동적 수평토압을 경감시키는데 효과적인 것을 알았다.

• 아시안잔디학회지
• /
• 제11권3호
• /
• pp.205-210
• /
• 1997

The metal spikes evaluated in this study significantly affected more negative on the turf wear and ball speed of putting green than alternative plastic spikes. 1.The metal spikes caused the most amount of wear compared with plastic spikes, athletic shoes and mountain-climbing shoes. On the other hand, athletic shoes caused the least amount of wear. Plastic spikes caused wear more than athletic shoes, hut apparently wear less than metal spikes. The wear from metal spike repaired later than any other tread types. 2.The wear from all kinds of shoe treads in wetcondition green were higher than in dry-condition green and the wear from metal spikes was more severe compared with plastic spikes in both green condition. 3. Ball speed of heavy compaction area by metal spike was reduced about 9% compared with that of light compaction area, hecause metal spikes made many holes in the putting green surface. On the other hand, plastic spikes did not affect hall speed of heavy and light compaction area in the putting green. Key words: Metal spike, Plastic spike, Wear, Ball speed.