• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.119-120
• /
• 2006

The impedance spectroscopy is one of the effective ways to understand the electrical properties of organic light emitting diodes. The frequency-dependant properties of small molecule based OLEDs have been studied. The equivalent circuit of single-layer device is composed of contact resistance ($R_c$), bulk resistance ($R_p$) and bulk capacitance ($C_p$). The equivalent circuit of double layer device is composed of two parallel circuits connected in series, each of which is a parallel resistor and a capacitor. We have fabricated a double layer device indium-rio-oxide (ITO, anode), N,NV -diphenyl- N,NV -bis(3-methylphenyI)-1,1V -diphenyl-4,4V-diamine (TPD, hole-transporting layer), tris-(8-hydroxyquinoline) aluminum (Alq3, emitting layer), and aluminum (AI, cathode) and two single layer devices ([TO/ Alq3/ AI, ITO/TPD/AI).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.279-282
• /
• 2006

최근 무선통신 서비스에서 이동성을 추가하여 이동 네트워크 서비스를 제공하기 위해 사용하는 MIPv6, FMIPv6는 긴 핸드오프 지연시간으로 인한 통신 품질의 저하 및 제어/관리 메시지로 인하여 다량의 데이터 패킷 손실, 고비용등과 같은 단점을 가지고 있다. 특히, 각 단말에서 시행하는 주소의 생성 및 유일성 검사를 위한 DAD(Duplication Address Detection)는 핸드오프 지연시간의 가장 큰 영향을 미치는 요소로서 이에 대한 연구가 요구된다. 본 논문에서는 L2(Layer 2)의 재결합 절차 상 MR(Mobile Router)/AR(Access Router)에서 직접 유일성 검사를 마친 후 생성된 주소를 재결합 응답 프레임에 추가시켜 할당하는 Cross-Layer방식을 제안한다. 또한 할당된 주소관리와 생성된 주소의 유일성 검사를 위한 캐쉬도입을 고려하여 성능평가를 하였다. 제안된 방식은 기존 알고리즘들보다 전체 핸드오프 지연시간이 $30{\sim}80%$정도의 감소효과를 보이고 있으며, 비용관점에서도 약 56%의 절감효과를 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.816-818
• /
• 1998

In this paper, a highly reliable communication network for DCS (Distributed Control System) in nuclear power plant is designed. The structure and characteristics of DCS in nuclear power plant is briefly explained. The features needed for a communication network for DCS in nuclear power plant is described. According to the above features, a layer structure for the communication network is determined and each layer is designed in detail. Accuracy of the model was evaluated by computer simulation.

• 한국통신학회논문지
• /
• 제39B권2호
• /
• pp.133-141
• /
• 2014

최근 차량간 통신 프로토콜 표준인 WAVE를 이용한 다양한 서비스가 이루어지고 있으며, 안정적인 시스템 운영을 위해서 기존의 차량 내부 네트워크와의 원활한 연계를 위한 게이트웨이가 필요하다. 따라서, 본 논문에서는 차량 외부 통신의 대표적인 프로토콜인 WAVE와 차량 내부 네트워크의 대표적인 프로토콜인 CAN을 연동하기 위한 게이트웨이를 제안한다. 제안하는 게이트웨이는 OSEK 운영체제 기반으로 설계되었으며, 통신 계층, 메시지 변환 계층, 메시지 관리 계층으로 구성된다. 통신 계층은 CAN을 통해 차량 정보를 수신하거나, WAVE 모듈로부터 주행안전정보 요청 메시지를 수신, 주행안전정보를 송신한다. 그리고 메시지 관리 계층에서는 수신 메시지 저장, 메시지의 유효성에 대한 오류검사 기능을 수행한다. 게이트웨이에 대한 성능분석을 위해 두 가지의 테스트 시나리오를 구성하였다. 첫 번째는 차량간 통신을 이용한 안전서비스에서의 메시지 구조를 정의한 BSM의 주기적인 전송이 이루어질 경우에서의 성능 테스트이다. 두 번째는 노변장치가 주행안전정보를 요청하는 경우에 게이트웨이가 차량내부정보를 응답하는 경우이다. 테스트 결과로써, 게이트웨이 자체 처리시간은 각각 0.32ms, 0.46ms으로 안정적으로 동작함을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.168-172
• /
• 2010

The Network-based handover still has problems such as the transmission delays and the packet losses in the case of macro mobility, though technological advances have been made in the wireless and mobile communication. For end-to-end handover, the link bandwidth has been reduced in the wireless network due to its burst errors and congestion control. To overcome such problems, we propose a new scheme of the macro handover according to the protocol layer. The proposed macro handover is implemented on the network layer to partially substitute wired signaling for wireless signaling, to flexibly employ buffers, and on the transport layer to postpone its retransmission time. We have performed extensive simulation using ns-2 and the result shows that our proposed scheme outperforms the other existing schemes in terms of transmission delay, packet loss, and data transfer rate during the handovers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.160-162
• /
• 2006

In this paper, a heterogeneous home network is designed and implemented based on the PLC (power line communications) and the IEEE 802.15.4. This paper presents the need of the heterogeneous home network and the convergence sub-layer. The convergence sub-layer is designed and implemented on the Xelline power line communication modem with IEEE 802.15.4 communication module.

• 디지털산업정보학회논문지
• /
• 제16권1호
• /
• pp.11-19
• /
• 2020

IoT has been consistently used in various fields such as smart home, wearables, and healthcare. Since IoT devices are small terminals, relatively simple wireless communication protocols such as IEEE 802.15.4 and ISO 18000 series are used. In this paper, we designed the 802.15.4q 2.4 GHz TASK physical layer. Physical protocol data unit of TASK supports bit-level interleaving and shortened BCH encoding. It is spread by unique ternary sequences. There are four spreading factors to choose the data rate according to the communication channel environment. The TASK physical layer was designed using verilog-HDL and verified through the loop-back test of the transceiver. The designed TASK physical layer was implemented in a fpga and tested using MAXIM RFICs. The PER was about 0% at 10 dB SNR. It is expected to be used in small, low power IoT applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.422-423
• /
• 2007

In this work, Organic Light Emitting Diodes using LiF as a electron-injecting interfacial have been fabricated for efficiency enhancements. This interfacial layer is interposed between Al/$Alq_3$ layer. The brightness and specific character as current density are higher than those of the device without it. To find best thickness of LiF layer, we used some samples with various thickness. The LiF interposition at the Al/$Alq_3$ interface encouraged the electrons injection and balances the injection numbers of hole and electron in the emission layer.

• Journal of Information Processing Systems
• /
• 제14권6호
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.