• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.180-182
• /
• 2008

제논램프를 점등시키기 위해서는 램프방전 초기에 수십kV의 고전압펄스를 발생시켜주어야 한다. 고전압펄스의 생성은 주로 transformer의 전자기유도작용을 이용한다. 지금까지는 주로 1개의 고주파 transformer를 이용하여 고전압펄스를 발생시키는 회로가 구성되어 왔다. 이 경우 회로가 단순해지는 이점이 있지만 transformer의 부피가 커지게 되어 상대적으로 보드에서 많은 공간을 차지하게 되는 단점이 있다. 따라서 본 논문에서는 기존의 단점을 해결하고자 고주파 transformer 1개를 사용하는 대신 소형의 고주파 transformer 2개를 2단계 step-up 회로로 구성하였다. 제안된 회로의 구성과 동작에 대하여 분석하였고 실험을 통해 제안된 회로가 유용함을 검증하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.123-129
• /
• 2009

In this study, SMPS to drive LED traffic signal light for the railroad and airport was designed and its electrical characteristics was measured. The output voltage, output current and its power efficiencies to the input voltage 8~12VAC and 8~16VDC were 6VDC, 1.85ADC and >70%, respectively. Also the power factors of the SMPS were above 0.75 in the AC input voltage range.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.83-91
• /
• 2008

To design the light control system using the PLC(Power Line Communication) with the ballasts of MH(Metal Halide) lamps, we analyzed the noise effect on the power line by the electronic ballast. For the power line characteristics are changed by the loads, the ballast have to be designed to be suitable to the PLC. Therefore, this paper proposed the optimal ballast and designed two kinds of PLM(Power Line Modem) which one is ASK type and the other is FSK type. Two type of PLM have used the manchester codes or DS/SS code. Experimental results have shown that the FSK type modem by the DS/SS coding technique have the best characteristics.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1665-1666
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display)는 표시장치로서 실용화된 후 많은 상품에 적용중이다. 그러나, LCD는 자체 발광능력이 없으므로 그후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU는 내부 광원으로 밝기가 균일한 평면광을 만들어 LCD 화면을 균일하게 면조사하는 역할을 한다. LCD가 적용되는 분야중 Note PC에는 광원으로 CCFL(Cold Cathode Fluorescent Lamp)가 적용되어 왔지만, 최근 고휘도, 박형화, 저소비 전력을 달성하기 위해 CCFL로는 한계가 있어 LED(Light Emitting Diode)를 적용한 BLU를 제작하기 위한 연구가 진행되고 있다. 본 연구에서는 점광원인 LED 적용한 LED에 있어서 요구되는 휘도 균일성을 향상시키기 위해서는 LED광원이 적용된 BLU의 외관 품질 향상을 위한 도광판 입광부 구조 최적화를 광추적 Simulation을 통해 예측하고 향상시킬 수 있는 구조를 제안한다. Simulation결과, 외관품질 개선을 위해 도광판 입광면에 130도의 Serration과 휘도를 향상하기 위해 도광판 밑면에 렌즈 형상의 바 구조를 도출해 적용한 결과 외관품질향상과 휘도향상을 얻었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.1-6
• /
• 2011

LED(Light Emitting Diode) components have advantages of longer lifetime, lower power consumption and easy-to-control, compare to normal lamp and fluorescent light, according to the development of recent technologies. Thus, lots of illuminations which utilize LED components could be used. Recently, Visible Light Communication(VLC) which is a part of communication technologies, utilizing high speed response characteristic of LED components, started receiving public attention. In case of VLC, there is no need of frequency allocation due to no use of radio, but also no interference exists during data transmission, much different in ISM((Industrial Scientific Medical band). This is the reason why a lot of research results about VLC are becoming issued. In this paper, a survey of feasibility for using VLC utilizing an original LED illumination for underwater applications has been done and a primitive possibility of its application has been examined.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2014

Recently, Light Emitting Diode(LED) light is changing the light equipment, which was considered just as a power-controlled device in home-network, into a IT convergence device by combining illumination function with wireless communication. As a result, Visible Light Communication(VLC) becomes a more practical solution to ubiquitous networks due to the more spread of LED light. One of representative applications using VLC is a VLC-based indoor navigation system which can provide high-accuracy indoor localization. In this paper, we model and implement a VLC based-indoor navigation system in which a fluorescent light type of LED lamp, which is normally used in large buildings, and smart devices, which are usually used by users, are utilized as main components for indoor navigation. Subsequently, it is expected that the paper can contribute to make VLC applications be more active.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.730-739
• /
• 2013

More than 30% of energy in Korea was spent in lighting part and then the consumption level and $CO_2$ emission will be increase from now. In this like situation, control-system construction for street-lamp of a smart grid-based that it has important meaning. Nowadays as a result, as an trying to utilize using Power-line-network communication modem and application a terminal in industrial fields, in this paper, we are want to implement the Power-line-network communication control system of PC-based. Therefore it will be use varied communication test-equipment and tools through the system. For experimentation, using the MODEM was able to use Planet production of based on the ZIC protocol and then the application program use the LabView. The result is primarily focused on equipments control by the PLC, and that we are able to perform each test with PLC equipment for experiment it.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.20-25
• /
• 2014

There are several severe problems for LED device, the next generation's economy green lighting: as the temperature increases, the lamp efficiency decreases; if the temperature is over $80^{\circ}C$, the lifetime of lighting decreases; Red Shift phenomenon that wavelength of spectrum line moves toward long wavelength occurs; and optical power decreases as $T_j$ increases. Thus, Heat sink design that can minimize the heat of LED device is currently in progress. While the thermal resistance of COB Type LED was reduced by direct coupling of LED chip to the board, residential 13.5W requires Heat sink in order resolve heat issue. This study designed Heat Sink suitable for residential 13.5W COB LED down-light and selected the optimum Fin thickness through flow simulation that packaged the designed Heat Sink and 13.5W COB. And finally it analyzed and evaluated the thermal modes using contacting thermometer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.137-143
• /
• 2017

Facilities for pedestrian safety of the visually impaired are scarce on the walkway and crosswalk. Braille blocks are installed on the walkways and RF controlled signal lights and sound generators are installed on the crosswalk at the main intersection for the visually impaired. An RF remote control system using one frequency has a problem of simultaneously operating nearby signal lamps and sound generators at an intersection. In this paper, we develop the smart cane that uses a beacon to identify the signal lamp and sound generators installed on the crosswalk at intersections and to operate the signal lamps and sound generators in the direction of the walk by IR communication. The developed smart cane is able to provide the pedestrian navigation for the blind by interworking with mobile apps through Bluetooth communication.