• International Journal of Contents
• /
• v.9 no.1
• /
• pp.33-37
• /
• 2013

BCH code is one of the most widely used error correcting code for the detection and correction of random errors in the modern digital communication systems. The conventional BCH encoder that is operated in bit-serial manner cannot adequate with the recent high speed appliances. Therefore, parallel encoding algorithms are always a necessity. In this paper, we introduced a new systolic array type BCH parallel encoder. To study the area and speed, several parallel factors of the systolic array encoder is compared. Furthermore, to prove the efficiency of the proposed algorithm using tree-type structure, the throughput and the area overhead was compared with its counterparts also. The proposed BCH encoder has a great flexibility in parallelization and the speed was increased by 40% than the original one. The results were implemented on synthesis and simulation on FPGA using VHDL.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.291-294
• /
• 1999

This paper presents a GaAs MESMET self oscillating mixer for high efficiency L-band frequency conversion with small chip area consumption. Main circuit topology is consist of cascoded two FET with resonating part. The circuit is designed as unstably nonlinear for limited frequency band. FET with drain shorted to source is used for frequency tuning element. Linear conversion gain of -18.83 ㏈ is achieved with 9mA and 4V consumption. Input 1㏈ compression point is more than 11㏈m. The chip area is 1.4$\times$1.4 mm.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.755-762
• /
• 2021

This study is a study for the utilization of marine information and communication technology of Masan port in order to play a pivotal role in the economy of Masan port as a base port for entering the southern coast area. It aims to examine the utilization of marine information technology to be pursued in the mid- to long-term based on the current status of Masan port and the ICT being applied.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.1
• /
• pp.26-30
• /
• 2021

K-city is an experimental area for developing self-driving cars. V2X communications such as WAVE, C-V2X and 5G are an essential technology for autonomous driving above level 4. In this paper, the research on the V2V communication environment was carried out through BSM receiving level analysis on the driving route in K-city. A stationary vehicle communicated with a test vehicle moving along urban area and suburban road in two different scenarios. The communication range and receiving levels obtained from this study will be used to develop and verify various safety scenarios using V2V communication within K-city in the future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.1014-1035
• /
• 2013

With recent advances in wireless communication and low-power miniaturized biomedical sensor and semiconductor technologies, wireless body area networks (WBAN) has become an integral part of the disaster aid system. Wearable vital sign sensors can track patients' status and location, thus enhancing disaster rescue efficiency. In the past few years, most of the literatures in the area of disaster aid system based on WBAN have focused on issues concerning wireless sensor design, sensor miniaturization, energy efficiency and communication protocols. In this paper, we will give an overview of disaster aid, discuss about the types of network communication as well as outline related issues. We will emphasize on analyzing six key issues in employing the disaster aid system. Finally, we will also highlight some of the challenges that still need to be addressed in the future in order to help the disaster aid system be truly and widely accepted by the public.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.280-281
• /
• 2023

Wireless communication in marine environments requires a significant amount of power for long-range communication, resulting in high energy consumption. Moreover, the numerous constraints in marine environments make it difficult to apply existing wireless communication technologies, necessitating the development of new technologies to address these issues. This paper investigates beam selection technology for marine environments, which reduces overall power consumption and minimizes interference between signals by selecting and transmitting necessary beams for communication in a specific area, enabling better quality communication. We validate the energy efficiency of the beam selection technology through simulations and compare it with existing wireless communication technologies. The results show that beam selection technology consumes less power and provides better communication quality than existing wireless communication technologies. Therefore, beam selection technology plays a critical role in establishing efficient communication systems in marine environments, and its application can improve communication quality over a broader area.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2007

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.102-109
• /
• 2014

The purpose of this study is to analyze collaborative relationship between members of a building construction organization. For the analysis of collaborative relationship, this researcher collected data by conducting a questionnaire survey with members of three large building construction organizations for apartment housing. The analyzed contents of collaborative relationship were the 'frequency of communication between organizational members' and their 'reliability'. According to the analysis of communication network, construction managers had low frequency of communication, whereas those responsible for each area, like construction deputy managers, had high frequency of communication. It indicates that middle managers are at the center of communication related to construction work in construction organizations. According to the analysis of reliability network, construction managers showed highest reliability, and employees at the top level in an organizational map also showed high reliability. Since they generally have a lot of experience, are some older of age, and assume responsibility for work, they are considered to receive reliability from other organizational members. This study proved that it was possible to numerically express reliability of organizational members, which is an abstract concept, and analyze it. Therefore, it is expected that the analysis result will highly be likely to be used in the area of construction management.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.73-76
• /
• 2005

The advanced information and communication technology gives vehicles another role of the third digital space, merging a physical space with a virtual space in a ubiquitous society. In the ubiquitous environment, the vehicle becomes a sensor node, which has a computing and communication capability in the digital space of wired and wireless network. An intelligent vehicle information system with a remote control and diagnosis is one of the future vehicle systems that we can expect in the ubiquitous environment. However, for the intelligent vehicle system, many issues such as vehicle mobility, in-vehicle communication, service platform and network convergence should be resolved. In this paper, an in-vehicle gateway is presented for an intelligent vehicle information system to make an access to heterogeneous networks. It gives an access to the server systems on the internet via CDMA-based hierarchical module architecture. Some experiments was made to find out how long it takes to communicate between a vehicle's intelligent information system and an external server in the various environment. The results show that the average response time amounts to 776ms at fixec place, 707ms at rural area and 910ms at urban area.