• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.584-590
• /
• 2016

This paper proposed "Priority Scheduling and MultiPath Routing Protocol (RRPS) for preventing communication disruption in the urban environment" to minimize the disconnection or disruption of V2I and V2V communication in the urban environment where communication is frequently disconnected according to density. The flow of the RRPS is explained as follows. RSU Request Priority Scheduling (RRPS) is used to apply the priority of the request message prior to reaching the end line by using the Start Line and End Line, which are the management areas of the RSU). This paper also proposed MPRP (Multi Path Routing Protocol) design to set up the multipath to the destination. As a result, the proposed RRPS improves the processing efficiency of V2I by applying priority scheduling to the message of the vehicle requesting the information in the RSU, and can prevent the communication disconnection. Thereby, it is improved the transmission success probability.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.242-248
• /
• 2017

Recently, Population has been concentrated in cities due to rapid economic growth. As a result, urban buildings are becoming more dense, high-rise, and diversified. The shape of these urban buildings increases the risk of fire, accidents and crime. The narrow living space has the characteristic of the unchanged floor. In case of a fire, the living space of the narrow residence is large in the damage because the smoke diffusion rate is fast. The radio wave transmittance and transmission distance of wireless communication used in fire fighting operations vary depending on the type of building materials and buildings. Therefore, this paper analyzes the building materials and structural characteristics of the narrow residential space for efficient fire fighting operations. We have developed a communication environment solution for a narrow residential space for the optimal fire fighting operation through the measurement of the radio wave transmittance and the transmission distance of the wireless communication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5571-5578
• /
• 2015

In this paper, we analyzed Alamouti based the MIMO-OFDM system in an underwater vertical communication channels. These in consideration both the transmission loss the multipath loss which is suitable for underwater environment are necessary method to improve the efficiency and communication performance in underwater communication. This paper is modeled in an environment that caused the error, considered each simulated the multi-path loss, transmission loss, the Doppler spread in order to implement a practical communication environment and simulated through the MIMO-OFDM system of Alamouti STBC method. The MIMO-OFDM system 2Tx-2Rx of Alamouti STBC scheme in underwater vertical communication system is obtained about 3~5 dB gain as compare with its 2Tx-1Rx scheme with reference $10^{-3}$ BER.

• The Research Journal of the Costume Culture
• /
• v.28 no.5
• /
• pp.705-718
• /
• 2020

The goal of this study was to develop a haptic communication system that can convey the tactile sensation of fashion materials in a virtual environment. In addition, the effectiveness and how realistically the virtual fabric image of this system delivers the tactile sensation of actual fabric was verified. First, a literature review was conducted through which the tactile attributes of fashion materials were defined that would be implemented in the haptic communication system. Then, a questionnaire for evaluating the tactile attributes of fashion materials was developed. Next, a haptic communication system was designed to convey fashion image experiences in a virtual environment, from which a haptic rendering model was suggested. The effectiveness of the haptic communication system was evaluated by verifying user experiences with questions developed through a user evaluation experiment. The validity of the evaluation questions pertaining to the tactile attributes and the effects of the haptic communication system were verified. Factor analysis was conducted to verify the evaluation of the tactile sense attributes of the fashion material, which identified density, thickness, and elasticity of the material as key factors. As a result of comparisons between the tactile sense through haptic characteristics and through touching, it was observed that regarding density and thickness, tactile sense experience led to greater perceived reality, while this was not the case for elasticity.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.747-752
• /
• 2011

Wireless technology has enabled farmers monitor and control protected production environment more efficiently. Utilization of USN (Ubiquitous Sensor Network) devices also brought benefits due to reduced wiring and central data handling requirements. However, wireless communication loses signal under unfavorable conditions (e.g., blocked signal path, low signal intensity). In this paper, performance of commercial wireless communication devices were evaluated for application to protected crop production. Two different models of wireless communication devices were tested. Sensors used in the study were weather units installed outside and top of a greenhouse (wind velocity and direction, precipitation, temperature and humidity), inside ambient condition units (temperature, humidity, $CO_2$, and light intensity), and irrigation status units (irrigation flow and pressure, and soil water content). Performance of wireless communication was evaluated with and without crop. For a 2.4 GHz device, communication distance was decreased by about 10% when crops were present between the transmitting and receiving antennas installed on the ground, and the best performance was obtained when the antennas were installed 2 m above the crop canopy. When tested in a greenhouse, center of a greenhouse was chosen as the location of receiving antenna. The results would provide information useful for implementation of wireless environment monitoring system for protected crop production using USN devices.

• Perspectives in Nursing Science
• /
• v.10 no.1
• /
• pp.12-23
• /
• 2013

Purpose: This study was conducted to investigate ICU nurses' perceptions of communication difficulties, the importance of and satisfaction with communication with doctors, other nurses, patients, and family, as well as to explore communication barrier with patient families. Methods: Investigators developed a 15-item communication perception questionnaire and 58-item communication barrier questionnaire. Communication barrier included 4 domains: nurses, family, environment, and patient condition. A total of 151 ICU nurses with a minimum of one year of ICU experience participated. Results: ICU patients ($3.38{\pm}0.73$) were the most difficult group to communicate with, followed by family ($3.32{\pm}0.72$), senior nurses ($3.25{\pm}0.74$), doctors ($3.21{\pm}0.68$), and nurse colleagues ($2.64{\pm}0.73$). Doctors ($4.61{\pm}0.53$) were the most important group to communicate with, followed by nurse colleagues ($4.52{\pm}0.54$), patients ($4.49{\pm}0.58$), senior nurses ($4.44{\pm}0.55$), and family ($4.43{\pm}0.61$). Satisfaction with communication was the highest with colleague nurses ($3.60{\pm}0.68$), then senior nurses ($3.37{\pm}0.74$), family ($3.18{\pm}0.71$), patients ($3.09{\pm}0.75$), and doctors ($3.06{\pm}0.83$).The total score of the communication barrier was $2.83{\pm}0.52$, where each domain was scored as follows: patient condition $3.13{\pm}0.74$, nurses $2.83{\pm}0.60$, environment $2.81{\pm}0.66$, and family $2.76{\pm}0.57$. The ICU nurses reported that communication was difficult due to 'sudden deterioration in the patient's condition', 'being too busy', 'a noisy environment', and 'information not being shared between family members.' Significant differences were noted by age, clinical experience, and marital status of nurse respondents. Conclusion: The findings indicated that development of a protocol on communication between nurses and doctors as well as development of an educational program on communication skills are necessary.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.285-297
• /
• 2014

This paper presents the results of an investigation into bi-directional communication in spectrum sharing-based cognitive radio (Bi-CR) systems. A Bi-CR system can increase the spectral efficiency significantly by sharing the spectrum and through the bi-directional use of spatial resources for two-way communication. On the other hand, the primary user experiences more interference from the secondary users in a Bi-CR system. Satisfying the interference constraint by simply reducing the transmission power results in performance degradation for secondary users. In addition, secondary users also experience self-interference from echo channels due to full duplexing. These imperfections may weaken the potential benefits of the Bi-CR system. Therefore, a new way to overcome these defects in the Bi-CR system is needed. To address this need, this paper proposes some novel power allocation schemes for the Bi-CR system. This contribution is based on two major analytic environments, i.e., noise-limited and interference-limited environments, for providing useful analysis. This paper first proposes an optimal power allocation (OPA) scheme in a noise-limited environment and then analyzes the achievable sum rates. This OPA scheme has an effect in the noise-limited environment. In addition, a power allocation scheme for the Bi-CR system in an interference-limited environment was also investigated. The numerical results showed that the proposed schemes can achieve the full duplexing gain available from the bi-directional use of spatial resources.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.1198-1212
• /
• 2013

Network virtualization enables autonomous and heterogeneous Virtual Networks (VNs) to co-exist on a shared physical substrate. In a Network Virtualization Environment (NVE), the fact that individual VNs are underpinned by diverse naming mechanisms brings about an obvious challenge for transparent communication across multiple VN domains due to the complexity of uniquely identifying users. Existing solutions were mainly proposed compatible to Internet paradigm with little consideration of their applications in a virtualized environment. This calls for a scalable and efficient naming framework to enable consistent communication across a large user population (fixed or mobile) hosted by multiple VNs. This paper highlights the underlying technical requirements and presents a scalable Global Naming Framework (GNF), which (1) enables transparent communication across multiple VNs owned by the same or different SPs; (2) supports communication in the presence of dynamics induced from both VN and end users; and (3) greatly reduces the network operational complexity (space and time). The suggested approach is assessed through extensive simulation experiments for a range of network scenarios. The numerical result clearly verifies its effectiveness and scalability which enables its application in a large-scale NVE without significant deployment and management hurdles.