• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.4227-4240
• /
• 2019

In this paper, we present our proposed magnetic induction based wireless communication system. The proposed system is designed to perform communication as well as distance measurement in underground environments. In order to improve the communication quality, we propose and implement the adaptive channel compensation technique. Based on the fact that the channel may be fast time-varying, we keep track of the channel status each time the data is received and accordingly compensate the channel coefficient for any change in the channel status. By using the proposed compensation technique, the developed platform can reliably communicate over distances of 10m while the packet error rate is being maintained under 5%. We also implement the distance measurement block that is useful for various applications that should promptly estimate the location of nearby nodes in communication. The distance between two nodes in communication is estimated by generating a table describing pairs of the magnetic signal strength and the corresponding distance. The experiment result shows that the platform can estimate the distance of a node located within 10m range with the measurement error less than 50cm.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.93-102
• /
• 2017

Wireless MEMS sensors have common features such as wireless communication, data measurement, embedded processing, battery-based self-power, and low cost, and increased measurement effectiveness. Wireless MEMS sensors enable efficient SHM without interfering with location because there is no requirement for triboelectric noise and cumbersome cables. However, there is little research on the communication distance with sensors and data. For instance, existing researches have limited communication distance experiments in civil engineering bridges. It is also necessary to investigate the characteristics of dynamic behavior and the communication distance of architectural structures with different wireless transmission/reception environments. Therefore, in a building structure with walls and slabs instead of open spaces, MEMS sensors and data loggers were used as distance experiments where communication disturbance between the vertical slab and the horizontal wall could actually be communicated.

• Journal of Information Processing Systems
• /
• 제16권5호
• /
• pp.1158-1168
• /
• 2020

The distance vector-hop wireless sensor node location method is one of typical range-free location methods. In distance vector-hop location method, if a wireless node A can directly communicate with wireless sensor network nodes B and C at its communication range, the hop count from wireless sensor nodes A to B is considered to be the same as that form wireless sensor nodes A to C. However, the real distance between wireless sensor nodes A and B may be dissimilar to that between wireless sensor nodes A and C. Therefore, there may be a discrepancy between the real distance and the estimated hop count distance, and this will affect wireless sensor node location error of distance vector-hop method. To overcome this problem, it proposes a wireless sensor network node location method by modifying the method of distance estimation in the distance vector-hop method. Firstly, we set three different communication powers for each node. Different hop counts correspond to different communication powers; and so this makes the corresponding relationship between the real distance and hop count more accurate, and also reduces the distance error between the real and estimated distance in wireless sensor network. Secondly, distance difference between the estimated distance between wireless sensor network anchor nodes and their corresponding real distance is computed. The average value of distance errors that is computed in the second step is used to modify the estimated distance from the wireless sensor network anchor node to the unknown sensor node. The improved node location method has smaller node location error than the distance vector-hop algorithm and other improved location methods, which is proved by simulations.

• International Journal of Contents
• /
• 제12권1호
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• International Journal of Contents
• /
• 제10권4호
• /
• pp.69-74
• /
• 2014

General location aware systems are only applied to indoor and outdoor environments using more than three transmitters to estimate a fixed object location. Those kinds of systems have environmental restrictions that require an already established infrastructure. To solve this problem, an Object Location Estimation (OLE) algorithm based on PTP (Point To Point) communication has been proposed. However, the problem with this method is that deduction of performance parameters is not enough and location estimation is very difficult because of unknown restriction conditions. From experimental tests in this research, we determined that the performance parameters for restriction conditions are a maximum transmission distance of CSS communication and an optimum moving distance interval between personal locations. In this paper, a system applied OLE algorithm based on PTP communication is implemented using a CSS (Chirp Spread Spectrum) communication module. A maximum transmission distance for CSS communication and an optimum moving distance interval between personal locations are then deducted and studied to estimate a fixed object location for generalization.

• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.45-49
• /
• 2012

VDL(VHF Data Link) Mode E uses TDMA(Time Division Multiple Access) based aeronautical communication technologies for airborne environments. In the VDL Mode E, aircraft uses RR(Reservation Requests) slot to request data slot. However, RR needs a long guard time, since aircraft communication spans a considerable distance. The more number of aircrafts causes a larger amount of guard times which can make a throughput decreased. In this paper, we propose an enhanced MAC to reduce the guard time by using the distance information of aircraft. The ground station sends management data including time stamp. And then all aircraft can measure their distance from the ground station.

• 교육시설
• /
• 제3권1호
• /
• pp.19-30
• /
• 1996

Integrated Services Digital Networks (ISDNs) and Broadband ISDN provide high speed data transmission capabilities and therefore, it is now possible to communicate with multimedia information including graphic, motion image, data and audio. Among several new services utilizing multimedia communication networks, distance education service which aims to overcome time and space restrictions between teachers and learners is now heavily focused in many countries. In this paper, several factors which affect to the effectiveness of distance education are surveyed and facilities for organizing distance education classrooms which utilize high speed multimedia communication network are studied in detail. Also, some points are suggested for organizing successful distance equation system based on the multimedia communication technology.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2196-2202
• /
• 2018

The conventional power system allowed only downstream power flow. Therefore, even if a fault occurs, only the forward current flow is considered. However, with the interest in distributed generation (DG), DGs such as Photovoltaic (PV), Wind Turbine (WT) are being connected to a power system. DGs have many advantages, but they also have disadvantage such as generation of reverse flow. Reverse flow can severely disrupt existing protection systems that only consider downstream power flow. The major problems that may arise from reverse power flow are blinding protection and sympathetic tripping. In order to solve such problems, the methods of installing a directional relay or a fault current limiter is proposed. However, this method is inconceivable because of the economics shortage. Therefore, in this paper, a distance relay installed in existing power system is used to solve the protection problem. Modeling of distance relay has been carried out using ElectroMagnetic Transients Program (EMTP), and it has been verified through simulations that the above problems can be solved by a distance relay.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권1호
• /
• pp.20-26
• /
• 2015

It is very difficult to design an underwater communication system because of multipath, Doppler effects, noise, and attenuation. These factors lead to errors in the communication performance and maximum propagation distance. In this study, we calculate the distance that can be realized using the direct-sequence code division multiple access (DS-CDMA) technique with direct-sequence spread spectrum (DSSS) in an underwater communication system considering only the attenuation and noise. We also compare the estimated and calculated propagation distances obtained for several different scenarios.

• 디지털융복합연구
• /
• 제10권3호
• /
• pp.265-271
• /
• 2012

본 논문에서는 무선 랜 방식을 적용한 서비스 로봇의 이동성을 위한 통신거리 성능평가 방법을 제안한다. 서비스 로봇은 서비스의 분류에 따라 모바일 통신 시스템의 기능을 갖추고 있고, ISM밴드(2.4GHz와 5.8GHz)의 무선랜(IEEE802.11a/b/g/n) 통신 방식을 선호하고 있다. 이러한 서비스 로봇의 이동성에 대한 무선 데이터 열화 성능을 평가하기 위해서 실질 필드 환경에서 거리감쇄 상관기법을 활용한 기준 벡터를 측정하여 제시하였다. 성능평가 방법은 기준 벡터의 Path Loss를 Azimuth 301W 장비에 대입하고, 시험 시료의 전송속도 및 송수신되는 처리량은 Chariot로 측정한다. 제안한 측정방법은 모바일 스마트 디바이스와 서비스 로봇의 이동성을 위한 무선 랜 통신거리 확보에 필요한 성능평가 방법이다. 또한 모바일 스마트 디바이스 업체들이 무선 랜 이동성 통신거리 성능평가를 위한 평가 방법으로 활용 할 수 있다.