• Journal of Magnetics
• /
• 제12권2호
• /
• pp.84-88
• /
• 2007

A micropump with spiral-type magnetic micromachine was fabricated. When a rotating magnetic field was applied, the machine rotated and pumped a surrounding liquid. We experimentally examined the basic properties of this pump. We found that the pressure and the flow rate could be controlled by the rotating frequency, and this pump could work under wide range kinematic viscosity. In addition, we proposed a disposable pump system using the machine. When a plate installed a fluid channel and the machine was set on a stage for generating a rotating magnetic field, the machine worked as the pump.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.102-109
• /
• 1998

In this paper, we propose a method of cooperative control based on immune system in distributed autonomous robotic system(DARS). Immune system is living body's self-protection and self-maintenance system. Thus these features can be applied to decision making of optimal swarm behavior in dynamically changing environment.For the purpose of applying immune system to DARS, a robot is regarded as a B lymphocyte(B cell), each environmental condition as an antigen, and a behavior strategy as an antibody respectively. The executing process of proposed method is as follows. When the environmental codintion changes, a robot select an appropriate beharior stategy. And its behavior stategy is stimulated and suppressed by other robot using communiation. Finally much stimulated strategy is adopted as a swarm behavior strategy. This control scheme is based on clonal selection and idotopic network hypothesis. And it is used for decision making of optimal swarm stragegy.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1833-1841
• /
• 1996

Recently, by emerging of the ALE techniques that make it possible to providereliable communications link automatically, high frequency communiation is newly used as emergency communication and back-up for satellite communications. ALE signal is transmitted in burst, and the received signal is subject to distortions by detrimental multipath fading channels. In the case of that channel, the performance of ALE system is highly dependent upon that of synchronization techniques. In this paper, M-ary FSK signals are detected by a bank of bandpass filter, which is implemented using recusive DFT(Discrete Fourier Transform). Also an acquisition and trancking algorithm are designed uisng parallel structure and early-late-gate methods respectively. Finally, we verify the performance ofthe proposed synchronization algorithm by the computer simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권1호
• /
• pp.57-68
• /
• 1989

This paper treats the analytical and experimental studies on the improvement of commutating circuit for the speed control of DC motor. A simple circuit composed of R, L and C elements is proposed here for switching off power SCR carrying the load current. The real important in this chopper circuit is to determine the reasonable values of commutating circuit constants. In this paper, the reasonable values of the commutating circuit constants are basically determined on a view point of commutating performances in the given circuit model and must satisfy the following conditions. The first, the peak commutating current should be larger than the anticipated maximum load current. The second, the circuit turn-off time (tc) must be longer than the SCR turn-off time (tq). The third, the resistor should be enough large to permit the current to be neglected in the analysis of the commutation circuit, as well as be enough small to permit to charge the capacity voltage (Ec) to the half the value of source voltage (E) before the next communication cycle is initiated. The last, the period of chopping signal must be the least possible multiple of the damping vibration period of commutating circuit. The improved chopper circuit used in the experiment under unloaded condition was composed to meet the reasonable conditions mentioned above, and a successful commuting performance was achieved without failure. Several types of microprocessor having a different value of CPU speed individually have been applied to the experiment under the loaded conditions. Also it shows that the faster the speed of CPU is, the more stable the commutation turns out.

• 한국통신학회논문지
• /
• 제22권10호
• /
• pp.2256-2271
• /
• 1997

본 논문에서는 저궤도 이동위성망에서 위성의 이동성을 양각(또는 전파거리)과 결부시켜 다중경로 페이딩과 위성간 간섭을 분석하고 다양한 전파전파 환경과 통신시스템 신뢰도에 대한 링크 성능을 평가하였다. 다중경로 페이딩은 전원지역, 도심지역 그리고 교외지역에서 위성의 이동에 따른 페이딩여유도의 변화를 통해 해석될 수 있으며, 위성간 간섭은 8가지 유형의 간섭경로에서 저궤도 위성시스템 내부의 자체간섭, 타 저궤도 위성시스템에의한 외부간섭 그리고 정지궤도 위성시스템에 의한 외부간섭을 분석하였다. 결론적으로 본 논문에서는 저궤도 위성망에서 시간의 흐름에 따른 통신링크의 변화를 양각과 전파거리에 따른 링크 여유도의 변화로 분석하였다.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.267-272
• /
• 2002

The production of micro components is one of the leading technologies in the fields of information and communiation, medical and biotechnology, and micro sensor and micro actuator system. Microfabrication (micromachining) techniques such as X-ray lithography, electroforming, micromolding and excimer laser ablation are used for the production of micro components out of silicon, polymer and a limited number of pure metals or binary alloys. However, since the first development of microfabrication technologies there have been demands for the cost-effective replication in large scale series as well as the extended range of available material. One such promising process is micro powder injection molding (PIM), which inherits the advantages of the conventional PIM technology, such as low production cost, shape complexity, applicability to many materials, applicability to many materials, and good tolerance. This paper reports on a fundamental investigation of the application of W-Cu powder to micro metal injection molding (MIM), especially in view of achieving a good filling and a safe removal of a micro mold conducted in the experiment. It is absolutely legitimate and meaningful, at the present state of the technique, to continue developing the micro MIM towards production processes for micro components.

• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1526-1537
• /
• 2021

Due to the difference between the underwater communication environment and the terrestrial communication environment, the radio communication mainly used on the ground cannot be used in underwater. For this reason, in the underwater communication environment, various communication media such as acoustic waves, infrared rays, light and so on has been studied, but there exist several difficulties in operating them individually due to their physical limitations. The concept for overcoming these difficulties is the very underwater multi-media communication, a method to select a communication medium best suitable for the current underwater environment among underwater communication multimedia whenever there occurs underwater communication failure. In this paper, we present an underwater multi-media communication network based on star topology and a fragmentation and reassembly technique to solve the problems caused by the different MTU (Maximum Transmission Unit) sizes among different underwater communication media. We also present the estimations and analysis on processing times in each of fragmentation and reassembly and the total data amount for transmitting fragments in our proposed underwater multi-media communication network.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.524-526
• /
• 2022

실시간 멀티미디어 서비스만을 고려하여 QoS를 고려한다면 단말의 수를 조정하여 적절하게 보장할 수 있지만, 본 연구에서는 실시간 멀티미디어 서비스와 일반 데이터 서비스를 고려한 복합적인 서비스를 고려하고 있다. 물리적인 네트워크 자원의 양은 한정되어 있기 때문에, 적절한 CAC가 이루어지지 않는다면 당연히 원하는 QoS의 보장도 이루어질 수 없다. 그러나, 전체 네트워크 자원과 현재 제공중인 서비스의 트래픽 profile과 QoS spec, 그리고 새로이 요청받은 서비스의 트래픽 profile과 QoS spec이 주어졌을 때, 이로부터 새로운 서비스 요청이 수용 가능한지를 정확히 판단하는 것은 상당히 어려운 일이다. 이를 위해서는 수학적 분석으로부터 다양한 시뮬레이션, 그리고 실제 네트워크 운영에서 얻어지는 데이터에 기반한 통계적인 연구에 이르기까지 다양한 방향에서의 연구가 필요할 것으로 보인다.

• 한국통신학회논문지
• /
• 제7권3호
• /
• pp.87-111
• /
• 1982

The education system is the communication field should be based on the characteristics of communication science and the function of manpower. However, the current education system at the level of college is insufficient and irrational to meet the requirements of the telecommunication field in our country. The main reasons are as follows: 1. Misunderstanding the characteristics of communication science. 2. Indiscretion of the categories of communication manpower due to lack of coordination between academic circles and communication industrial field. Telecommunication function could be performed only by combining the engineering and the suitable operational control. The communication engineering is similar to the electronic engineering, but the former should follow the miscellaneous international protocol and the domestic regulations, being only a means for the telecommunication function. In order to improve the education system of communiation, we aim to identify the principle of communication science, orthodoxy of the education, the categories of communication industrial field and manpower. The present system has been formed on the basis of ignoring the attributes of manpower and historical background of communication science. Therefore, this paper proposes to set up new departmental organizations for educating communication manpower as the following: In addition, this paper proposes a new curriculum model of the above twodept, and we believe that it well turn out more scientific, effective and reasonable education for the communication science. 1. Modification of the present formation, designated Electronic Communication Department. 2. New formation model: A. The best future model such as establishing ad independent telecommunication college which is composed of : Dept. of Radiocommunication Dept. of Telecommunication Enginnering Dept. of Communication Industrial management Dept. of Transmission Engineering Dept. of Telecommunication Law B. An immediately practicable proposal model instead of the existin Dept.. which is composed of the first two Dept. of the above five Dept. In addition, this paper proposes a new curriculum model of the above two dept. and we believe that it will turn out the education for the communication science to be more scientific, effective and reasonable.

• 디자인학연구
• /
• 제15권1호
• /
• pp.279-288
• /
• 2002

전통적인 4대 대중전달 매체인 신문, 잡지, TV, 라디오에 이어 제5의 매체로 부각되고 있는 온라인 미디어인 "인터넷"의 등장이다. 이러한 새로운 매체를 기반으로 한 웹 매거진은 시각커뮤니케이션을 추구하는 양태로 우리에게 다가와 있다. 본 논문에서는 커뮤니케이션의 도구로서 내용적인 측면과 시각적인 측면에서의 사례분석에 초점을 맞춰 분석하고자 한다. 내용적인 측면에서는 정보근접성 및 정보이용성의 차이점, 홈페이지의 구성내용의 차이점에 대한 분석이고 또 다른 분석은 웹매거진의 시각적인 측면에서의 시각적 구성 요소인 제호, 타이포그래피, 사진, 색채, 레이아웃에 대한 분석을 통해 웹매거진의 발전방향을 모색해 보고자 한다. 이러한 두 방향에서의 분석결과 다음과 같은 전환의 필요성을 언급하고자 한다. 첫째, 인터넷을 기반으로 하는 웹 매거진의 구성 내용이나 정보가 거의 유사하므로 앞으로는 여성지만의 특성을 살린 다양한 섹션 개발이 필요하며, 아울러 정보제공자 입장에서의 정보 제공방식에서 탈피하여 정보 사용자 입장에서의 요구 사항을 파악하여 정보의 유용성을 향상시켜야 할 것이다. 둘째, 웹 매거진의 구성에 있어 웹 디자이너는 미학적인 관점에 서만 해결하려는 경향이 있다. 따라서 웹 디자이너는 사용자들의 정보 이용 행위에 관한 분석 결과를 토대로 웹사이트를 구성하는 방법론을 모색하여야 한다. 셋째, 시각적 조형성이 뛰어난 웹매거진이라 할지라도 그 매거진에 대한 평가는 사용자가 하는 것이므로 사용자 중심의 레이아웃이 필요하다고 할 수 있다. 즉 사진과 일러스트레이션, 배너광구 아이콘 등을 포함한 시각적 이미지들이 웹 화면에 많이 포함되는 경우에는 웹 매거진의 내용에 대한 주목성과 가득성이 떨어질 가능성이 있으므로, 사용자의 기사 열독이 용이하도록 적절한 크기로 레이아웃 해야 할 것이다.