• Journal of Magnetics
• /
• v.12 no.2
• /
• pp.84-88
• /
• 2007

A micropump with spiral-type magnetic micromachine was fabricated. When a rotating magnetic field was applied, the machine rotated and pumped a surrounding liquid. We experimentally examined the basic properties of this pump. We found that the pressure and the flow rate could be controlled by the rotating frequency, and this pump could work under wide range kinematic viscosity. In addition, we proposed a disposable pump system using the machine. When a plate installed a fluid channel and the machine was set on a stage for generating a rotating magnetic field, the machine worked as the pump.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.102-109
• /
• 1998

In this paper, we propose a method of cooperative control based on immune system in distributed autonomous robotic system(DARS). Immune system is living body's self-protection and self-maintenance system. Thus these features can be applied to decision making of optimal swarm behavior in dynamically changing environment.For the purpose of applying immune system to DARS, a robot is regarded as a B lymphocyte(B cell), each environmental condition as an antigen, and a behavior strategy as an antibody respectively. The executing process of proposed method is as follows. When the environmental codintion changes, a robot select an appropriate beharior stategy. And its behavior stategy is stimulated and suppressed by other robot using communiation. Finally much stimulated strategy is adopted as a swarm behavior strategy. This control scheme is based on clonal selection and idotopic network hypothesis. And it is used for decision making of optimal swarm stragegy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1833-1841
• /
• 1996

Recently, by emerging of the ALE techniques that make it possible to providereliable communications link automatically, high frequency communiation is newly used as emergency communication and back-up for satellite communications. ALE signal is transmitted in burst, and the received signal is subject to distortions by detrimental multipath fading channels. In the case of that channel, the performance of ALE system is highly dependent upon that of synchronization techniques. In this paper, M-ary FSK signals are detected by a bank of bandpass filter, which is implemented using recusive DFT(Discrete Fourier Transform). Also an acquisition and trancking algorithm are designed uisng parallel structure and early-late-gate methods respectively. Finally, we verify the performance ofthe proposed synchronization algorithm by the computer simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.1
• /
• pp.57-68
• /
• 1989

This paper treats the analytical and experimental studies on the improvement of commutating circuit for the speed control of DC motor. A simple circuit composed of R, L and C elements is proposed here for switching off power SCR carrying the load current. The real important in this chopper circuit is to determine the reasonable values of commutating circuit constants. In this paper, the reasonable values of the commutating circuit constants are basically determined on a view point of commutating performances in the given circuit model and must satisfy the following conditions. The first, the peak commutating current should be larger than the anticipated maximum load current. The second, the circuit turn-off time (tc) must be longer than the SCR turn-off time (tq). The third, the resistor should be enough large to permit the current to be neglected in the analysis of the commutation circuit, as well as be enough small to permit to charge the capacity voltage (Ec) to the half the value of source voltage (E) before the next communication cycle is initiated. The last, the period of chopping signal must be the least possible multiple of the damping vibration period of commutating circuit. The improved chopper circuit used in the experiment under unloaded condition was composed to meet the reasonable conditions mentioned above, and a successful commuting performance was achieved without failure. Several types of microprocessor having a different value of CPU speed individually have been applied to the experiment under the loaded conditions. Also it shows that the faster the speed of CPU is, the more stable the commutation turns out.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2256-2271
• /
• 1997

In this paper, we analyze the multipath fading and the inter-satellite interference considering the satellite mobility in the LEO mobile satellite communication networks and evaluate the link perfodrmance for various wave propagation environments and reliabilities of communiation system. Multipath fading is estimated by analyzing the variation of fading margin for the satellite motion in rural, urban and suburban environments. The inter-satellite interferences are classified into 8 bypes with respect to interference path. The interferences evaluated in the paper are as follows:intra-LEO satellite interference, inter-LEO satellite interference, and GEO satellite to LEO satellite interference. As a conclusion, this apaper analyzes the change of elevation anagle and propagation distance with respect to time in the LEO satellite netwoek and prosents the variation of link margin continuously.

• Journal of Powder Materials
• /
• v.9 no.4
• /
• pp.267-272
• /
• 2002

The production of micro components is one of the leading technologies in the fields of information and communiation, medical and biotechnology, and micro sensor and micro actuator system. Microfabrication (micromachining) techniques such as X-ray lithography, electroforming, micromolding and excimer laser ablation are used for the production of micro components out of silicon, polymer and a limited number of pure metals or binary alloys. However, since the first development of microfabrication technologies there have been demands for the cost-effective replication in large scale series as well as the extended range of available material. One such promising process is micro powder injection molding (PIM), which inherits the advantages of the conventional PIM technology, such as low production cost, shape complexity, applicability to many materials, applicability to many materials, and good tolerance. This paper reports on a fundamental investigation of the application of W-Cu powder to micro metal injection molding (MIM), especially in view of achieving a good filling and a safe removal of a micro mold conducted in the experiment. It is absolutely legitimate and meaningful, at the present state of the technique, to continue developing the micro MIM towards production processes for micro components.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1526-1537
• /
• 2021

Due to the difference between the underwater communication environment and the terrestrial communication environment, the radio communication mainly used on the ground cannot be used in underwater. For this reason, in the underwater communication environment, various communication media such as acoustic waves, infrared rays, light and so on has been studied, but there exist several difficulties in operating them individually due to their physical limitations. The concept for overcoming these difficulties is the very underwater multi-media communication, a method to select a communication medium best suitable for the current underwater environment among underwater communication multimedia whenever there occurs underwater communication failure. In this paper, we present an underwater multi-media communication network based on star topology and a fragmentation and reassembly technique to solve the problems caused by the different MTU (Maximum Transmission Unit) sizes among different underwater communication media. We also present the estimations and analysis on processing times in each of fragmentation and reassembly and the total data amount for transmitting fragments in our proposed underwater multi-media communication network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.524-526
• /
• 2022

Considering QoS only considering real-time multimedia service, it is possible to adjust the number of terminals and ensure them appropriately, but this study considers complex services considering real-time multimedia service and general data service. Since the amount of physical network resources is limited, the guarantee of the desired QoS can not be achieved unless the appropriate CAC is done. However, given the traffic profile and QoS spec of the entire network resource and the current service being provided, and the traffic profile and QoS spec of the newly requested service, it is quite difficult to determine exactly whether the new service request is acceptable from this. To do this, it is necessary to study in various directions from mathematical analysis to various simulations and statistical research based on data obtained from actual network operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.3
• /
• pp.87-111
• /
• 1982

The education system is the communication field should be based on the characteristics of communication science and the function of manpower. However, the current education system at the level of college is insufficient and irrational to meet the requirements of the telecommunication field in our country. The main reasons are as follows: 1. Misunderstanding the characteristics of communication science. 2. Indiscretion of the categories of communication manpower due to lack of coordination between academic circles and communication industrial field. Telecommunication function could be performed only by combining the engineering and the suitable operational control. The communication engineering is similar to the electronic engineering, but the former should follow the miscellaneous international protocol and the domestic regulations, being only a means for the telecommunication function. In order to improve the education system of communiation, we aim to identify the principle of communication science, orthodoxy of the education, the categories of communication industrial field and manpower. The present system has been formed on the basis of ignoring the attributes of manpower and historical background of communication science. Therefore, this paper proposes to set up new departmental organizations for educating communication manpower as the following: In addition, this paper proposes a new curriculum model of the above twodept, and we believe that it well turn out more scientific, effective and reasonable education for the communication science. 1. Modification of the present formation, designated Electronic Communication Department. 2. New formation model: A. The best future model such as establishing ad independent telecommunication college which is composed of : Dept. of Radiocommunication Dept. of Telecommunication Enginnering Dept. of Communication Industrial management Dept. of Transmission Engineering Dept. of Telecommunication Law B. An immediately practicable proposal model instead of the existin Dept.. which is composed of the first two Dept. of the above five Dept. In addition, this paper proposes a new curriculum model of the above two dept. and we believe that it will turn out the education for the communication science to be more scientific, effective and reasonable.

• Archives of design research
• /
• v.15 no.1
• /
• pp.279-288
• /
• 2002

The appearance of Internet, the 5th medium which has succeeded newspaper, magazine, TV, radio, creates WEB MAGAZINE to overcome the restriction of space and time. This paper has conducted the contents and visual points of view in webmagazine. Through case study, the following and identify for the analysis of the webmagazine contents and visual format. Firstly, communiation at webmagazine is carried out at the user-centered atmosphere. Secondly, Even through an aesthetic is emphasized in the webmagazine, when web designer compose of the web site, it is necessary to find the proper methodology under the basis of users behavior Thirdly, Although webmagazine required the visual form, we should know that the evaluation of webmagazine should be implemented by users. Therefore, webmagazine should be designed by the user-centered layout.