• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.102-108
• /
• 1991

Utilizing self-phase modulation effects of a dispersion-shifted fiber and delay-line characteristics of two gratings, mode-locked 80 ps pulses at 1.319${\mu}{\textrm}{m}$ wavelength from a Nd: YAG laser are compressed down to 2.1 ps. These pulses are further compressed down to 340 fs using higher order soliton effects in a common single mode fiber.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.913-916
• /
• 2003

In many cases, ac line EMI filters are designed by trial and error method. Thus, designing a filter is a time-consuming process. To overcome the problem, the newly analytical design procedure is proposed in this paper. Using the modeling circuit of each filter components, the filter design is carried out applicable to both common-mode (CM) and differential-mode (DM). These are verified through the experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.552-559
• /
• 1998

Conducted noise in power line contains both the common mode(CM) and differential mode(DM) noise. These two modes of noise are caused by different noise sources and paths. Therefore, CM/DM noise must be deal with individually in EMI filter. In this paper the technique to separate power line noise is presented, which can be used to measure both the CM and the DM noise from total generated noise. Also, noise-separator is designed and experimental results showed 30 dB above of separation performance in 10 kHz~10 MHz.

• ETRI Journal
• /
• v.31 no.2
• /
• pp.243-245
• /
• 2009

A novel ultra-low-power readout circuit for a pH-sensitive ion-sensitive field-effect transistor (ISFET) is proposed. It uses an ISFET/reference FET (REFET) differential pair operating in weak-inversion and a simple current-mode metal-oxide semiconductor FET (MOSFET) translinear circuit. Simulation results verify that the circuit operates with excellent common-mode rejection ability and good linearity for a single pH range from 4 to 10, while only 4 nA is drawn from a single 1 V supply voltage.

• Asian Journal of Business Environment
• /
• v.1 no.1
• /
• pp.21-25
• /
• 2011

Sub-region cooperation is necessary based on the condition that China-Japan-Korea free trade area has not been established. Shandong has common interests with Koreain economic and trade cooperation and it has been equipped with prominent external environment and industrial advantages in sub-region cooperation. The article discusses the advantages, the specific patterns, the cooperation contents and the matched government measures of sub-region cooperation between Shandong and Korea, with the purpose of modifying the relevant policies launched by government.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.452-457
• /
• 1998

This paper deal with problems of leakage current, shaft voltage, bearing current, and EMI, in valiable-speed AC drives. The originating mechanism is illustrated with a high-frequency equivalent circuit. Reduction methods are classified in to six categories based on the equivalent circuit. Some experimental results show that a common-mode transformer (CMT) and a common-noise canceler (ACC) can solve the problems, which have been proposed the authors.

• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.283-288
• /
• 1992

From january 1970 through december 1990, 130 cases of patients with chest penetrating injury were admitted to department of thoracic and cardiovascular surgery in Chosun University Hospital. We analyzed above patients and obtained results were as follows: 1. The ratio of male to female was 7.1:1 in male predominance, and the majority[69.6%] was distributed from 2nd to 3rd decade. 2. The most common cause of chest penetrating injuries was stab wound. 3. 110 cases[84.5%] were arrived to our emergency room within six hours after trauma. 4. The most common injuring mode was hemo, pneumothorax. 5. The frequently injured site of the penetrating chest trauma was left side of the chest [64.65%]. 6. The common associated injuries of penetrating chest injuries were extremities injuries, abdominal injuries, head & facial injuries. 7. The common method of surgical treatment were closed thoracostomy[78 cases], open thoracotomy[20 cases], laparatomy[12 cases]. 8. The overall motality was 3.07%[4/130], and the causes were hypovolemic shock, sepsis and asphyxia.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2331-2333
• /
• 2002

In this paper, we propose a new model with the common Control Rod Control System which can be applied to both Korea Standard Nuclear Power Plant model and Westinghouse model. The common model classified by one control rod assembly can solve the common-mode failure. We digitalize the new model and make existing analog models simplified.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.72-79
• /
• 2003

Classical designs of optical transimpedance preamplifier for p-i-n photodiode receiver circuits generally employ common source transimpedance input stages. In this paper, we explore the design of a class of current-mode optical transimpedance preamplifier based upon common gate input stages. A feature of current-mode optical transimpedance preamplifier is high gain and high bandwidth. The bandwidth of the transimpedance preamplifier can also be increased by the capacitive peaking technique. In this paper we included the development and application of a circuit analysis technique based on the minimum noise. We develop a general formulation of the technique, illustrate its use on a number of circuit examples, and apply it to the design and optimization of the low-noise transimpedance amplifier. Using the noise minimization method and the capacitive peaking technique we designed a transimpedance preamplifier with low noise, high-speed current-mode transimpedance preamplifier with a 1.57GHz bandwidth, and a 2.34K transimpedance gain, a 470nA input noise current. The proposed preamplifier consumes 16.84mW from a 3.3V power supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.39-46
• /
• 2014

In this paper, to operate 2.4 GHz Inverted-L antenna with On-Board Broadband characteristics is proposed. The antenna was designed on the system board, the bandwidth by adjusting the reactance of the antenna that was formed common-mode and differential-mode on the antenna stubs has been improved. The system size is $80mm{\times}60mm$, the size of the antenna was limited to $30mm{\times}60mm$, the thickness of FR4 dielectric substrate is 0.8 mm, FR4 dielectric constant 4.4 is used. The experimental results, the bandwidth from 17.2 to 24.1 %, the gain is 3.01~4.71 dB, omni-directional radiation pattern characteristics were obtained. By a mobile terminal design applying the results of the paper, the handset's price competitiveness and production efficiency can be improved.