• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.277-284
• /
• 2017

For passive power factor correction, the valley fill circuit approach is attractive for low power applications because of low cost, high efficiency, and simple circuit design. However, to vouch for the product quality, two dc-link capacitors in the valley fill circuit should be selected to withstand the peak rectified ac input voltage. The common mode (CM) and differential mode (DM) choke should be used to suppress the electromagnetic interference (EMI) noise, thereby resulting in large size volume product. This paper presents the practical design and implementation of a valley fill flyback converter with reduced dc link capacitors and EMI magnetic volumes. By using the proposed over voltage protection circuit, dc-link capacitors in the valley fill circuit can be selected to withstand half the peak rectified ac input voltage, and the proposed CM/DM choke can be successfully adopted. The proposed circuit effectiveness is shown by simulation and experimentally verified by a 78W prototype.

• Journal of Communications and Networks
• /
• 제6권1호
• /
• pp.46-59
• /
• 2004

In this paper, we present two algorithms for efficiently aggregating link state information needed for quality-of-service (QoS) routing. In these algorithms, each edge node in a group is mapped onto a node of a shufflenet or a node of a de Bruijn graph. By this mapping, the number of links for which state information is maintained becomes aN (a is an integer, N is the number of edge nodes) which is significantly smaller than N2 in the full-mesh approach. Our algorithms also can support asymmetric link state parameters which are common in practice, while many previous algorithms such as the spanning tree approach can be applied only to networks with symmetric link state parameters. Experimental results show that the performance of our shufflenet algorithm is close to that of the full-mesh approach in terms of the accuracy of bandwidth and delay information, with only a much smaller amount of information. On the other hand, although it is not as good as the shufflenet approach, the de Bruijn algorithm also performs far better than the star approach which is one of the most widely accepted schemes. The de Bruijn algorithm needs smaller computational complexity than most previous algorithms for asymmetric networks, including the shufflenet algorithm.

• 한국정보통신학회논문지
• /
• 제19권3호
• /
• pp.514-522
• /
• 2015

Microwave 무선 링크에서 거리에 따라 고 품질의 무선 링크를 지속적으로 보장하기 위해서는 무선 페이딩에 대한 고려가 필요하다. 링크 거리에 따라 동일한 고정 변조 방식을 적용할 경우 거리에 따른 페이딩 발생 확률의 증가로 장거리의 경우 요구 가용도를 지속적으로 보장하기 어렵다. 이를 위해 AM(Adaptive Modulation)이 유용하지만 AM만으로는 가변되는 전송량으로 인해 가용도 보장에 제한사항이 있다. 이전 연구에서 링크 거리를 고려한 전송 성능 향상 기법을 제안 했었다. 그러나, 이전 방법은 변수를 고려한 수식을 제시하지 않아 공통 적용을 위해서는 보완이 필요하였다. 본 논문에서는 장거리 무선 링크에서 가용도 보장을 위한 페이드 마진을 고려한 AM에 기반한 우선순위 트래픽 전송량 산출식을 제시하고 채널 대역폭 비교를 통한 최적화된 적응 전송 기법을 제안한다.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.361-367
• /
• 2014

This paper is related to a new solar power conditioner for a built-in step-up chopper function. In the first step-up chopper proposed solar PV power conditioner for mutually connected in series with the input voltage of the bypass diodes are respectively connected to the positive terminal should install the mutual boosting chopper diode connected in series with the boost chopper switching element between the two power supply and at the same time the first and the second was connected to a second diode and a resonance inductor and a snubber capacitor in series with each other. And the common connection point between the bypass diode and the step-up chopper and the step-up chopper diode common connection point of the switching elements of the input voltage was set to the boost inductor for storing energy. In addition, between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point of the first auxiliary diode and the second common connection point of the auxiliary diode was provided, the resonance capacitor. Between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point and the common connection point of the resonance inductor snubber capacitor and connecting the third secondary diode, between two power supply lines is characterized by configuring the DC link capacitor bus lines in parallel. Therefore, it is possible to suppress the switching loss through, DC link bus lines, as well as there could seek miniaturization and weight reduction of the power conditioner itself by using a common capacitor of the non-polar non-polar electrolytic capacitor having a capacitor, the service life of the circuit can be extended and it is possible to greatly reduce the loss can be greatly improve the reliability of the product and the operation of the product itself.

• 지능정보연구
• /
• 제21권3호
• /
• pp.37-52
• /
• 2015

최근 전세계적으로 R&D 네트워크 및 산학연 협력 등을 강화하고 있는 추세이다. 네트워크 및 협업연구 부문에 대한 지원이 증가하면 학제간 융합 연구를 통한 새로운 이론의 창출과 새로운 학문 사업 분야로의 확장 가능성을 높일 수 있다. 우리나라도 정부의 R&D 과제 수행을 통해 형성된 R&D 네트워크를 효율적으로 지원할 수 있는 전략의 필요성이 증대되고 있다. 그럼에도 불구하고 우리나라는 국가 R&D 사업 참여자에 대한 개별인력정보와 일반화된 통계 자료에만 의존하여 네트워크 관점에서의 정책은 미흡한 실정이다. 이에 따라 R&D 사업에 참여하는 각 주체들 간의 관계를 분석하고 산학연 R&D 네트워크를 기반으로 향후 발생할 수 있는 네트워크의 변화를 예측하고자 한다. R&D 네트워크 변화 예측을 위해 Common Neighbor 모형과 Jaccard's Coefficient 모형을 기반 모델로서 채택하고자 하며, 이들의 한계점을 보완하고 Link Prediction 정확도를 향상시킨 새로운 예측 모형을 제안하고 이들간의 비교분석 결과를 도출하고자 한다. 이와 같은 연구 결과는 향후 R&D 네트워크의 변화에 대한 효과적인 예측을 통해 선제적인 산학연 사업 지원 전략을 수립하고, 융합 R&D사업 등을 효과적으로 지원할 수 있는 국가 정책을 도모하기 위한 방안을 제시한다는 점에서 의의가 있다. 본 연구결과 가중치의 적용은 Common Neighbor 모형과 Jaccard's coefficient 모형 모두에서 긍정적인 성과를 나타냈는데 상대적으로는 가중치가 적용된 Common Neighbor 모형에서의 정확도가 더 개선된 것으로 도출되었다. 즉, Common Neighbor 모형에서는 4,136개 중 650개를 예측한 반면, 가중치를 적용한 Common Neighbor 모형에서는50개의 정답이 증가한 700개를 예측하는 효과를 보였다. 한편, 상대적으로 Jaccard 계수의 경우는 약간의 성능 개선은 있으나 그 차이가 미미한 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.943-946
• /
• 1987

This paper describes the test techniques that are used for the implementation test of signalling link function in the signalling system No.7 recommended by 0703 in CCITT red book. The test scenarios are produced by means of the state transition diagrams which are based on the specification of CCITT recommendation 0703. This test scenarios consist of five independent tasks written in MC68000 assembly language and are scheduled to be executed in multitasking kernel. This test scenarios can also be used to test signalling link function implemented in the different environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.50-67
• /
• 2015

The Cognitive Radio (CR) paradigm in tactical ad hoc networks is an important element of future military communications for network-centric warfare. This paper presents a novel Cognitive Link State Routing protocol for CR-based tactical ad hoc networks. The proposed scheme provides prompt and reliable routes for Primary User (PU) activity through procedures that incorporate two main functions: PU-aware power adaptation and channel switching. For the PU-aware power adaptation, closer multipoint relay nodes are selected to prevent network partition and ensure successful PU communication. The PU-aware channel switching is proactively conducted using control messages to switch to a new available channel based on a common channel list. Our simulation study based on the ns-3 simulator demonstrates that the proposed routing scheme delivers significantly improved performance in terms of average end-to-end delay, jitter, and packet delivery ratio.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.28-36
• /
• 2011

In this paper, a three phase cycloconverter type high frequency AC link inverter is discussed. The configuration consists of a high frequency full-bridge inverter and a high frequency transformer followed by a three phase cycloconverter whose switch is composed of anti-series connected MOSFETs with a common source. A simple digital control strategy based on space vector modulation (SVM) and repetitive control for the cycloconverter is proposed although its input voltage is a high frequency AC pulse. The operation principle of the proposed control strategy is analyzed and the equivalent working modes during one interval are also presented. The effectiveness of the proposed control strategy is verified through Matlab/Simulink simulations and experiments on a 1.45kW prototype.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.197-202
• /
• 2010

This study deals with the accident models of arterial link sections by driving type. The objectives is to develop models by driving type using the accident data of 24 arterial links in Cheong-ju. In pursuing the above, this study gives particular emphasis to modeling such the accidents as the straight, lane change and others. The main results analyzed are as follows. First, the number of accidents is analyzed to account for about 59% in straight, 31% in lane change and 10% in others. Second, the number of left-turn lane as common variables, and the ADT, number of pedestrian crossings, connecting roads and link length as specific variables are selected in developing models(number of accident and EPDO). Third, 8 models which are all statistically significant are developed. Finally, RMSE of the driving type models was analyzed to be better than that of dummy variable.

• 제어로봇시스템학회논문지
• /
• 제18권8호
• /
• pp.774-779
• /
• 2012

We design and implement a RTT (Round Trip Time) based TCP (Transmission Control Protocol) for USN (Ubiquitous Sensor Network). We adopt a basic update algorithm for window size from FAST TCP that uses the queuing delay at link as the congestion measure. The designed TCP estimates the queuing delay at link from the measured RTT in the network layer, and updates the window size based on the estimated queuing delay. The designed TCP allows to utilize the full capacity of USN links and avoids the waste of the given link capacity that is common without the flow control in the transport layer. The experiment results show that the window size of the sender converges within a small range of variations without any packet loss, and verify the stability and performance of the designed TCP.