• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.338-344
• /
• 2016

The study is actively being performed to increase fuel injection pressure of common rail system among countermeasures to meet the emission regulation strengthen of the Diesel engine. The common rail fuel injection tube in such ultra high pressure common rail system has the weakest structural characteristics against vibration that is generated by fuel injection pressure and pulsation during engine operation and driving. Thus the extreme durability is required for common rail fuel injection tube, and the drawing process is being magnified as the most important technical fact for strength of seamless pipe that is the raw material of common rail tube. In this respect, we analyzed the characteristic of dimension and stress variation of the ultra high pressure common rail fuel injection tube by variation of Die and Plug angle in drawing process. Based on the analysis, we tried to obtain the raw material strength of common rail fuel injection tube for applying to the ultra high pressure common rail system. As a result, Plug angle is more important than entry angle of Die and we could obtain the target dimension and strength of the ultra high pressure common rail fuel injection tube through optimization of Plug angle.

• 지능정보연구
• /
• 제21권3호
• /
• pp.37-52
• /
• 2015

최근 전세계적으로 R&D 네트워크 및 산학연 협력 등을 강화하고 있는 추세이다. 네트워크 및 협업연구 부문에 대한 지원이 증가하면 학제간 융합 연구를 통한 새로운 이론의 창출과 새로운 학문 사업 분야로의 확장 가능성을 높일 수 있다. 우리나라도 정부의 R&D 과제 수행을 통해 형성된 R&D 네트워크를 효율적으로 지원할 수 있는 전략의 필요성이 증대되고 있다. 그럼에도 불구하고 우리나라는 국가 R&D 사업 참여자에 대한 개별인력정보와 일반화된 통계 자료에만 의존하여 네트워크 관점에서의 정책은 미흡한 실정이다. 이에 따라 R&D 사업에 참여하는 각 주체들 간의 관계를 분석하고 산학연 R&D 네트워크를 기반으로 향후 발생할 수 있는 네트워크의 변화를 예측하고자 한다. R&D 네트워크 변화 예측을 위해 Common Neighbor 모형과 Jaccard's Coefficient 모형을 기반 모델로서 채택하고자 하며, 이들의 한계점을 보완하고 Link Prediction 정확도를 향상시킨 새로운 예측 모형을 제안하고 이들간의 비교분석 결과를 도출하고자 한다. 이와 같은 연구 결과는 향후 R&D 네트워크의 변화에 대한 효과적인 예측을 통해 선제적인 산학연 사업 지원 전략을 수립하고, 융합 R&D사업 등을 효과적으로 지원할 수 있는 국가 정책을 도모하기 위한 방안을 제시한다는 점에서 의의가 있다. 본 연구결과 가중치의 적용은 Common Neighbor 모형과 Jaccard's coefficient 모형 모두에서 긍정적인 성과를 나타냈는데 상대적으로는 가중치가 적용된 Common Neighbor 모형에서의 정확도가 더 개선된 것으로 도출되었다. 즉, Common Neighbor 모형에서는 4,136개 중 650개를 예측한 반면, 가중치를 적용한 Common Neighbor 모형에서는50개의 정답이 증가한 700개를 예측하는 효과를 보였다. 한편, 상대적으로 Jaccard 계수의 경우는 약간의 성능 개선은 있으나 그 차이가 미미한 것으로 나타났다.

• 대한산업공학회지
• /
• 제43권2호
• /
• pp.120-126
• /
• 2017

This paper has proposed the development direction and R&D analysis approach that the diversity of defense R&D process and product should be mainly under consideration. It has shown that there is a fair possibility of the various quality assess to meet the R&D requirements in defense-based. Thus, the analysis on multiple quality elements is carried out with defense R&D characteristics. Especially, a quality management master planning based on the quality model of establishing defense R&D policy has proposed, identifying relevant quality characteristics on the R&D of weapon system and the R&D of core technology. That is, this paper is not only interested in determining an appropriate model for improving the quality of a R&D weapon system but also argued efforts in order to reap the best possible outcome and process on both the R&D of weapon system and quality of the R&D of core technology including present R&D activities.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.132-140
• /
• 2009

Recently, the interest in the development of high efficiency Diesel engine technology using alternative fuel has been on the rise and related studies are being performed. Therefore, the DME(Dimethyl Ether), an oxygen containing fuel as an alternative fuel for light oil that can be used for diesel engines since it generates very little smoke. But it is unavoidable that the modification of a fuel supply system in an engine to application of the DME fuel because of DME fuel properties. So, in this study, a DME high pressure pump for a common-rail fuel supply system has been composed and the test results of the pump have been presented. As the results of the tests, it is confirmed that DME pump inlet pressure, pump speed and common-rail pressure effects on the volumetric efficiencies of the pump. Finally, it is defined that the optimum plunger volume of a DME pump has to be extended to the minimum 150% compared to a Diesel pump plunger volume considering DME fuel properties and volumetric efficiencies characteristics at same specifications of the high pressure pump.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1380-1387
• /
• 2012

송수신(T/R) 모듈은 능동 위상 배열 시스템에서 핵심 부품이다. 현재 가장 널리 적용되고 있는 모듈 구조는 Brick 형태로서 이를 소형화 하는 것은 전체 시스템 구성의 유연성을 확보할 수 있는 중요한 요소가 된다. 소형화를 위하여 MMIC 갯수를 최소화 할 수 있는 Common leg 구조를 갖는 MFC(Multi Fuction Chip) 사용이 유리하며, 이득이 높은 T/R 모듈을 고밀도로 구현하기 위하여 송수신간 격리도의 확보가 필수적이다. 본 논문에서는 Common leg 구조에서 불가피하게 발생하는 궤환 경로 문제와 이로 인한 송수신 격리도의 한계를 개선하기 위하여 바이어스 전압 제어 방법을 제안하고, 측정 결과를 기반으로 최적 바이어스 타이밍을 설계하였다. 본 논문에서 제작/측정된 TR 모듈은 일반 T/R 모듈에 비하여 약 1/2의 크기($140{\times}80{\times}16mm^3$)를 가지며, 높은 출력(채널당 7 W)과 높은 송수신 이득(35 dB 송신 이득과 30 dB 수신 이득)의 구현이 가능하였다.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.8-15
• /
• 2019

We describe a common optical system that merges a LADAR system, which generates a point cloud, and a more traditional imaging system operating in the LWIR, which generates image data. The optimum diameter of the entrance pupil was determined by analysis of detection ranges of the LADAR sensor, and the result was applied to design a common optical system using LADAR sensors and LWIR sensors; the performance of these sensors was then evaluated. The minimum detectable signal of the $128{\times}128-pixel$ LADAR detector was calculated as 20.5 nW. The detection range of the LADAR optical system was calculated to be 1,000 m, and according to the results, the optimum diameter of the entrance pupil was determined to be 15.7 cm. The modulation transfer function (MTF) in relation to the diffraction limit of the designed common optical system was analyzed and, according to the results, the MTF of the LADAR optical system was 98.8% at the spatial frequency of 5 cycles per millimeter, while that of the LWIR optical system was 92.4% at the spatial frequency of 29 cycles per millimeter. The detection, recognition, and identification distances of the LWIR optical system were determined to be 5.12, 2.82, and 1.96 km, respectively.

• Journal of Information Processing Systems
• /
• 제14권3호
• /
• pp.740-750
• /
• 2018

There are a great number of Internet-connected devices and their information can be acquired through an Internet-wide scanning tool. By associating device information with publicly known security vulnerabilities, security experts are able to determine whether a particular device is vulnerable. Currently, the identification of the device information and its related vulnerabilities is manually carried out. It is necessary to automate the process to identify a huge number of Internet-connected devices in order to analyze more than one hundred thousand security vulnerabilities. In this paper, we propose a method of automatically generating device information in the Common Platform Enumeration (CPE) format from banner text to discover potentially weak devices having the Common Vulnerabilities Exposures (CVE) vulnerability. We demonstrated that our proposed method can distinguish as much adequate CPE information as possible in the service banner.

• 기술혁신학회지
• /
• 제7권2호
• /
• pp.257-281
• /
• 2004

In this paper we： (1) analyze the relationship among public R＆D investment, private R＆D investment, and GDP by employing the Clangor causality test; (2) examine if there is any country-specific pattern in the relationship by testing the cases of Korea, the U.S. and Japan. We found some common results for the above countries as follows： (i) GDP causes Public R＆D, not vice versa; (ii) Private R＆D causes GDP; and (iii) Public R＆D does not cause Private R＆D. For the bivariate model of GDP and total R＆D, the results show the existence of one-way causality running from total R＆D to GDP f3r both U.S. and Japan. We also found bidirectional causal relationship between GDP and total R＆D for Korea, which could be interpreted as a typical pattern for newly industrialized countries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.797-798
• /
• 2005

We report a novel structure for a full-color AMOLED (Active Matrix Organic Light Emitting Diode) eliminating the patterning process of a blue emitting layer. The patterning of the three primary colors, RGB, is a key technology in the OLED fabrication process. Conventional full color AMOLED containing RGB layers includes the three opportunities of the defects to make an accurate position and fine resolution using various technologies such as fine metal mask, ink-jet printing and laser-induced transfer system. We can skip the blue patterning step by simply stacking the blue layer as a common layer to the whole active area after pixelizing two primary colors, RG, in the conventional small molecular OLED structure. The red and green pixel showed equivalent performances without any contribution of the blue emission.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2004년도 춘계학술대회
• /
• pp.77-97
• /
• 2004

In this paper we: (1) analyze the relationship among public R&D investment, private R&D investment, and GDP by employing the Granger causality test; (2) examine if there is any country-specific pattern in the relationship by testing the cases of Korea, the U.S. and Japan. We found some common results for the above countries as follows: (i) GDP causes Public R&D, not vice versa; (ii) Private R&D causes GDP; and (iii) Public R&D does not cause Private R&D. For the bivariate model of GDP and total R&D, the results show the existence of one-way causality running from total R&D to GDP for both U.S, and Japan. We also found bidirectional causal relationship between GDP and total R&D for Korea, which could be interpreted as a typical pattern for newly industrialized countries.