• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.103-125
• /
• 2020

This paper reviews the EU Case, Claudia Wegener v. Royal Air Maroc SA [2018] ECLI:EU:C:2018:361, Case C-537/17. It analyzes some issues as to Wegener case by examining EU Regulations and practical point of views. Article 3(1)(a) of Regulation (EC) No 261/2004 of the European Parliament and of the Council of 11 February 2004 establishing common rules on compensation and assistance to passengers in the event of denied boarding and of cancellation or long delay of flights, entitled scope, provides: "this Regulation shall apply: (a) to passengers departing from an airport located in the territory of a Member State to which the Treaty applies; (b) to passengers departing from an airport located in a third country to an airport situated in the territory of a Member State to which the Treaty applies, unless they received benefits or compensation and were given assistance in that third country, if the operating air carrier of the flight concerned is a Community carrier." ECJ held that must be interpreted as meaning that Regulation (EC) No 261/2004 applies to a passenger transport effected under a single booking and comprising, between its departure from an airport situated in the territory of a Member State and its arrival at an airport situated in the territory of a third State, a scheduled stopover outside the European Union with a change of aircraft. According to the Court, it is apparent from the regulation and case-law that when, as in the present case, two (or more) flights are booked as a single unit, those flights constitute a whole for the purposes of the right to compensation for passengers. Those flights must therefore be considered as one and the same connecting flight.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3061-3070
• /
• 2012

Novel 2-hexylthieno[3,2-b]thiophene-containing conjugated molecules have been synthesized via a reduction reaction using tin chloride in an acidic medium. They exhibited good solubility in common organic solvents and good self-film and crystal-forming properties. The single-crystalline objects were fabricated by a solvent slow diffusion process and then were employed for fabricating field-effect transistors (FETs) along with thinfilm transistors (TFTs). TFTs made of 5 and 6 exhibited carrier mobility as high as 0.10-0.15 $cm^2V^{-1}s^{-1}$. The single-crystal-based FET made of 6 showed 0.70 $cm^2V^{-1}s^{-1}$ which was relatively higher than that of the 5-based FET (${\mu}=0.23cm^2V^{-1}s^{-1}$). In addition, we fabricated organic photovoltaic (OPV) cells with new 2-hexylthieno [3,2-b]thiophene-containing conjugated molecules and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester ($PC_{61}BM$) without thermal annealing. The ternary system for a bulk heterojunction (BHJ) OPV cell was elaborated using $PC_{61}BM$ and two p-type conjugated molecules such as 5 and 7 for modulating the molecular energy levels. As a result, the OPV cell containing 5, 7, and $PC_{61}BM$ had improved results with an open-circuit voltage of 0.90 V, a short-circuit current density of 2.83 $mA/cm^2$, and a fill factor of 0.31, offering an overall power conversion efficiency (PCE) of 0.78%, which was larger than those of the devices made of only molecule 5 (${\eta}$~0.67%) or 7 (${\eta}$~0.46%) with $PC_{61}BM$ under identical weight compositions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.429-429
• /
• 2016

Organolead halide perovskite have attracted much attention over the past three years as the third generation photovoltaic due to simple fabrication process via solution process and their great photovoltaic properties. Many structures such as mesoporous scaffold, planar heterojunction or 1-D TiO2 or ZnO nanorod array structures have been studied to enhance performances. And the photovoltaic performances and carrier transport properties were studied depending on the cell structures and shape of perovskite film. For example, the perovskite cell based on TiO2/ZnO nanorod electron transport materials showed higher electron mobility than the mesoporous structured semiconductor layer due to 1-D direct pathway for electron transport. However, the reason for enhanced performance was not fully understood whether either the shape of perovskite or the structure of TiO2/ZnO nanorod scaffold play a dominant role. In this regard, for a clear understanding of the shape/structure of perovskite layer, we applied anodized aluminum oxide material which is good candidate as the inactive scaffold that does not influence the charge transport. We fabricated vertical one dimensional (1-D) nanostructured methylammonium lead mixed halide perovskite (CH3NH3PbI3-xClx) solar cell by infiltrating perovskite in the pore of anodized aluminum oxide (AAO). AAO template, one of the common nanostructured materials with one dimensional pore and controllable pore diameters, was successfully fabricated by anodizing and widening of the thermally evaporated Al film on the compact TiO2 layer. Using AAO as a scaffold for perovskite, we obtained 1-D shaped perovskite absorber, and over 15% photo conversion efficiency was obtained. I-V measurement, photoluminescence, impedance, and time-limited current collection were performed to determine vertically arrayed 1-D perovskite solar cells shaped in comparison with planar heterojunction and mesoporous alumina structured solar cells. Our findings lead to reveal the influence of the shape of perovskite layer on photoelectrical properties.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.59-65
• /
• 2006

Al-doped and F-doped ZnO (ZnO : Al & ZnO : F) thin films were coated onto glass substrate by sol-gel method. These films showed c-axis orientation in common, but different I(002)/[I(002) + I(101)] and FWHM (full width at half-maximum). In particular, the grain size of the ZnO : Al films decreased with the increase in the Al-doping concentration, while for the ZnO : F films the grain siae increased up to F 3 at% and then decreased. For the electrical properties, Hall effect measurement was used. The resistivity of the ZnO : Al films and the ZnO : F films were, respectively, $2.9{\times}10^{-2}{\Omega}cm$ at Al 1 at% and $3.3{\times}10^{-1}{\Omega}cm$ at F 3 at%. Moreover compared with ZnO:Al films, ZnO:F films have lower carrier concentration (ZnO : Al $4.8{\times}10^{18}cm^{-3}$, ZnO : F $3.9{\times}10^{16}cm^{-3}$) and higher mobility (ZnO : Al $45cm^2/Vs$, ZnO : F $495cm^2/Vs$). For average optical transmittances, ZnO : Al thin films have $86{\sim}90%$ and ZnO : F films have $77{\sim}85%$ comparatively low.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.3
• /
• pp.41-63
• /
• 2004

The area covered by product liability in broadest sense is so vast that an attempt to analyse all its impact on the aviation world risk. Every effort has been made to confine our review of subject a closely as possible to its influence on aircraft manufacturers, airlines and passengers, in spite of strong connections with other spheres of commercial. Product Liability in aviation is the liability of aircraft's manufacturer, processor or non-manufacturing seller for injury to the person or property of a buyer or third party caused by a product which has been sold. Here-in a product is aircraft, third party is passengers who suffered damage by defective design, defective construction, inadequate instructions for handling in aircraft. Whenever a product turns out to be defective after it has been sold, there are under Anglo-American law three remedies available against the aircraft's manufacturer (1) liability for negligence (2) breach of warranty (3) strict liability in tort. There are Under continental law Three remedies available against the aircraft's manufacturer (1) liability for defective warranty (2) liability for non-fulfillment of obligation (3) liability in tort. It is worth pointing out here an action for breach of warranty or for defective warranty, for non-fulfillment of obligation is available only to direct purchaser on the basis of his contract with the aircraft's manufacturer, which of course weakness its range and effectiveness. An action for tort offers the advantage of being available also to third parties who have acquired the defective product at a later stage. In tort, obligations are constituted not only by contract, but also by stature and common law. In conclusion, There in no difference in principle of law. In conclusion I would like to make few suggestions regarding the product liability for aircraft's manufacturer. Firstly, current general product liability code does not specify whether government offices(e.g. FAA) inspector conducted the inspection and auditory certificate can qualify as conclusive legal evidence. These need to be clarified. Secondly, because Korea is gaining potential of becoming aircraft's manufacturer through co-manufacturing and subcontracting-manufacturing with the US and independent production, there needs legislation that can harmonize the protection of both aircraft's manufacturers and their injured parties. Since Korea is in primary stage of aviation industry, considerate policy cannot be overlooked for its protection and promotion. Thirdly, because aircraft manufacturers are risking restitution like air-carriers whose scope of restitution have widened to strict and unlimited liability, there needs importation of mandatory liability insurance and national warranty into the product liability for aircraft's manufacturers. Fourthly, there needs domestic legislation of air transportation law that clearly regulates overall legal relationship in air transportation such as carrier & aircraft manufacturer's liability, and aviation insurance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.111-120
• /
• 2006

In this paper, a node architecture of WDM metro network for connecting broadband access networks to converge wire/wireless networks. In consideration of the proposed node architecture and network requirements we proposed and evaluated medium access control protocols. We review WDM related technologies of sub-carrier multiplexing and optical components in order to resolve the bottleneck between optical backbone networks md access networks, and a access node architecture sharing common wavelength is introduced. Source-stripping (SS) MAC protocol Is evaluated under the proposed functional node architecture. DS+IS (Destination-Stripping and Source-Stripping) and DS+IS (Destination-Stripping and Intermediate-Stripping) MAC protocols are described to increase the slot-reuse factor which is low on SS MAC protocol. The key function of new MAC protocols regards the optical switch module of proposed node architecture and helps intermediate or source access nodes for dropping slots to destinations of different wavelength group. Thus, slot-reuse factor increases as the MAC protocols reduce the unnecessary ring-rotation of transferred slots. We use a numerical analysis to expect bandwidth efficiency and maximum throughput by slot-reuse factor Throughput network simulation, the verification of throughput, queuing delay, and transmission fairness are compared among MAC protocols.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.181.2-181.2
• /
• 2014

A single-layer graphene has been uniformly grown on a Cu surface at elevated temperatures by thermally processing a poly (methyl methacrylate) (PMMA) film in a rapid thermal annealing (RTA) system under vacuum. The detailed chemistry of the transition from solid-state carbon to graphene on the catalytic Cu surface was investigated by performing in-situ residual gas analysis while PMMA/Cu-foil samples being heated, in conjunction with interrupted growth studies to reconstruct ex-situ the heating process. We found that the gas species of mass/charge (m/e) ratio of 15 ($CH_3{^+}$) was mainly originated from the thermal decomposition of PMMA, indicating that the formation of graphene occurs with hydrocarbon molecules vaporized from PMMA, such as methane and/or methyl radicals, as precursors rather than by the direct graphitization of solid-state carbon. We also found that the temperature for dominantly vaporizing hydrocarbon molecules from PMMA and the length of time, the gaseous hydrocarbon atmosphere is maintained, are dependent on both the heating temperature profile and the amount of a solid carbon feedstock. From those results, we strongly suggest that the heating rate and the amount of solid carbon are the dominant factors to determine the crystalline quality of the resulting graphene film. Under optimal growth conditions, the PMMA-derived graphene was found to have a carrier (hole) mobility as high as ${\sim}2,700cm^2V^{-1}s^{-1}$ at room temperature, which is superior to common graphene converted from solid carbon.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.420-426
• /
• 2017

Methicillin-resistant Staphylococcus (MRS) can be colonized in various body sites and is more frequently isolated in healthcare associated persons. This study aimed to evaluate the contamination rate of MRS in a high school environment, those living with closed life style. Staphylococcus aureus was isolated from only the hands of 2 students among a sample of 28 students, and S. aureus were susceptible to methicillin antibiotics. Coagulase negative Staphylococci (CoNS) were isolated from the hands of 26 students (26/28, 92.9%), and among them, 14 (53.8%) isolates were methicillin-resistant CoNS (MRCoNS). Among the 14 MRCoNS, S. warneri was the most common (8/14, 57%) and susceptible to most $non-{\beta}-lactam$ antibiotics, such as clindamycin, erythromycin, ciprofloxacin, tetracycline, gentamicin, and vancomycin. In a culture of 31 desks, S. aureus was not isolated but CoNS were isolated from 26 desks (26/31, 83.6%), which did not harbor the mecA gene. The other bacteria isolated from the hands and desks were Micrococcus and Bacillus spp. In conclusion, methicillin-resistant S. aureus was not isolated from the hands and desks of high school students. However, the frequency of MRCoNS harboring mecA gene were high in the hands of high school students. Therefore, to prevent and to control the transfer of infection, intensifying preventive education, such as hand washing, and active surveillance systems, such as an investigation of contamination or carrier rate of resistant bacteria are necessary.

• Korean Journal of Veterinary Research
• /
• v.39 no.2
• /
• pp.247-256
• /
• 1999

A disease of young Holstein calves characterized by recurrent pneumonia, ulcerative and granulomatous stomatitis, enteritis with bacterial overgrowth, periodontitis, delayed wound healing, persistent neutrophilia and death at an early age had been originally described in 1983 and again in 1987. Most of these calves had stunted growth and a persistent, progressive neutrophilia (often exceeding 100,000/ml). By investigation of pedigrees, all of the affected calves have now been traced to a common sire and confirmed by polymerase chain reaction (PCR) diagnostic DNA testing to be homozygous carriers of a defective allele for bovine CD18. Neutrophils from these calves have several functional deficits and, most importantly, fail to adhere in a ${\beta}_2$-integrin dependent manner. The ${\beta}_2$-integrins represent a family of glycoproteins which participate in various leukocyte adhesion reactions during host defense. The presence or absence of ${\beta}_2$-integrin molecules can be demonstrated on the surface of neutrophils, monocytes and lymphocytes from normal or affected calves using specific monoclonal antibodies and flow cytometry, or by colloidal gold immunolabeling and scanning electron microscopy in backscatter mode. Deficiency of the ${\beta}_2$-integrins on all leukocyte types in Holstein calves is analogous to leukocyte adhesion deficiency (LAD) seen in humans. Neutrophils in bovine (BLAD) and human LAD patients are unable to adhere to the endothelial lining of the cardiovascular system thus interrupting egression of neutrophils into infected tissues. Other leukocytes, while still deficient in expression of the ${\beta}_2$-integrins, are still able to efficiently egress from the blood stream due to interactions of other adhesion molecules that are not as highly expressed on neutrophils. Both BLAD cattle and LAD children (who do not receive bone marrow transplants) often die at an early age as a result of the failure of neutrophils to extravasate into infected tissues. In 1991, Shuster, et $al^{27}$, identified two point mutations within the alleles encoding bovine CD18 in a Holstein calf afflicted with leukocyte adhesion deficiency. One mutation causes an aspartic acid to glycine substitution at amino acid 128 (D128G) in an extracellular region of this adhesion glycoprotein that is highly conserved (> 95% identity) between humans, cattle and mice. The other mutation is silent. Numerous calves with clinical symptoms of leukocyte adhesion deficiency have since been tested and all have been found homozygous for the D128G allele. In addition, calves homozygous far the D128G allele have been identified during widespread DNA testing in the United States. All cattle with the mutant allele are related to one bull, who through artificial insemination (A.I.), sired many calves in the 1950's and 1960's. The carrier frequency of the D128G CD18 allele among U.S. Holstein cattle had reached approximately 15% among active A.I. bulls and 8% among cows. By 1993, the organization of the dairy industry and the diagnostic test developed to genotype cattle, enabled virtually complete eradication of bovine leukocyte adhesion deficiency among current and future A.I. bulls.

• The KIPS Transactions:PartC
• /
• v.19C no.4
• /
• pp.239-246
• /
• 2012

The function of location estimation in WPAN has been studied and specified on the ultra wide band optionally. But the devices based on CSS(Chirp Spread Spectrum) specification has been used widely in the market because of its functionality, cheapness and support of development. As the CSS device uses 2.4GHz for a carrier frequency and the sampling frequency is lower than that of the UWB, the resolution of a timestamp is very coarse. Then actually the error of a measured distance is very large about 30cm~1m at 10 m depart. And the location error in ($10m{\times}10m$) environment is known as about 1m~2m. So for some applications which require more accurate location information, it is very natural and important to develop a sophisticated post processing algorithm after distance measurements. In this paper, we have studied extended Kalman filter with the frequency offsets of anchor nodes, and proposed a novel algorithm frequency offset compensated extended Kalman filter. The frequency offsets are composed with a variable as a common frequency offset and constants as individual frequency offsets. The proposed algorithm shows that the accurate location estimation, less than 10cm distance error, with CSS WPAN nodes is possible practically.