• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2280-2285
• /
• 2011

As the prefecture railroad construction accelerates, unmanned system's reliability and safety is increasing in demand. Accordingly, effective management of construction projects for the PM and SE techniques are being applied, with the introduction and use of PMIS computerized systems. Due to the construction of railways, from the start of PMIS research planning, design, procurement, to construction and commissioning, various expertise is being carefully gathered, and by integrating it into the unified budget ideas and processes, rational, efficient, organized, and manageable financial plans are developed for the computerized system. However, the current PMIS does not take into account the life-cycle. This study is to bring attention to the BIM smart BOM-based configuration management for life-cycle through the consideration for railway construction project management.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2013

When the ground subsystem of Ground Based Augmentation System(GBAS) is installed at the airport, the functions and performance of subsystem should be evaluated through ground and flight testing at the pre-commissioning phase. In the case of GBAS flight testing, it can be conducted by the existing flight check aircraft, but the GBAS ground testing requires the development of specially customized equipment to perform the ground testing. Therefore, this paper describes the preliminary design of GBAS onboard test equipment which can be independently used for the GBAS ground testing and flight testing on a car and an aircraft.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.58.1-58.1
• /
• 2015

Gravitational-wave has been predicted by Einstein's general relativity in 1916, but its direct detection has failed to date despite of the persistent efforts in the last fifty years in the ground-based gravitational wave detectors. In the centennial year of the birth of general relativity, 'advanced LIGO', one of the most promising Earth-based gravitational wave detectors, plans to start commissioning for the successful discovery of gravitational waves. In addition, a pathfinder satellite of eLISA project, a space-based GW antenna by European Space Agency (ESA), will be launched in the mid of this year. In this talk, we review the current status of gravitational waves detection experiments and discuss its scientific impacts and the possibility of opening the new age of astronomy.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.43.1-43.1
• /
• 2015

After successful commissioning observations in 2014, Immersion Grating Infrared Spectrograph (IGRINS) has been conducting its normal scientific operations on the 2.7m Harlan J. Smith telescope at the McDonald Observatory and has been producing high spectral resolution near-infrared spectroscopic data in excellent quality. We will present the current status of the instrument and its software packages, and highlight initial scientific results. In particular, we will discuss possibilities of having IGRINS on larger telescopes.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1751-1755
• /
• 2004

Increasing environmental pressures to reduce NOx emission are being placed on coal-fired boilers. To meet the environmental requirements, Doosan Heavy Industries & Construction Co., Ltd.(Doosan) has developed low NOx pulverized coal burner. Low NOx pulverized coal burner has already delivered, and it's combustion performance was evaluated to the NOx and Unburned Carbon(UBC) during the commissioning tests. The test results are shown that the strong relationship is existed between NOx and OFA flow rate, and also fuel-N fraction of coal has effected on NOx emission.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.582-587
• /
• 1993

A robot application system is developed for dual purpose of stud welding and are welding to weld plates in the manufacturing of elevator cabin. The production quantity is not so big to accommodate separate stations for stud welding and are welding respectively while the need for randomization of the processes is urgent. A robot with specification for spot welding is chosen, which is appropriate for stud welding. Some implementations are made so that the robot may also be shared for are welding process. Common jig and fixture is designed for the dual purpose. Important aspects in the procedure of system design, installation, and commissioning are stated, and signal set-ups and logic diagrams are illustrated.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.1
• /
• pp.27-34
• /
• 2001

On 16Dec. 1999, It was 100 years since the opening the first railroad section of 33.2km on Sep. 1899, Korea High Speed Railroad had a successful trial run of 200km/h on test track section. And the test speed 300km/h was achieved an 28 June 2000 during continuous commissioning. In the 21st century, the High Speed Railroad will be opened commercially in Korea and will contribute to technical development. Now, it is necessary to re-evaluate the role of railroad in modern society and to activate the railroad system. Ultimately, the competitive power of nation will be strengthened with energy saving, reduction of pollution and transportation cost. It conclusion the railroad system have to be expaned about 50% of total transportation to make preparations for reopening of Eurasia silk route through KyungEu railroad connection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.453-456
• /
• 2007

The purpose of this study is to explain the importance of Vibration Monitoring Device by introducing an example of Predictive Maintenance System using Condition Monitoring System of Hydro-turbine generator. Confirming vibration of generation equipment is commissioning procedure during equipment completion for checking guaranteed items. Data from Generator output range are used to determine output band to continue the performance of equipment. The Vibration Monitoring System is not absolute method of maintenance, but if it is used well with expert, it will be visible, data-analyzed, scientific maintenance more than others. And also, Condition Monitoring System is very important for remote controlled small hydro-power plant although most of it is installed in Large hydro-power plant.

• Journal of the Korean Society of Combustion
• /
• v.11 no.4
• /
• pp.22-26
• /
• 2006

To meet the environmental requirements, Doosan Heavy Industries & Construction Co., Ltd. (Doosan) had developed low NOx pulverized coal burner and it was applied to boiler retrofit project, 130 ton/hr coal fired cogeneration boiler, in 2003. NOx emissionand unburned carbon (UBC) in fly ash were measured during the commissioning tests. In this paper, the operation results of low NOx pulverized coal burner installed in 130 ton/hr coal fired boiler are presented. Burners emitted 160 ppm (@6 % $O_2$ basis) NOx and 3 % UBC with Chinacoal containing 0.86 % fuel nitrogen. And also it was shown that NOx emission rate of low NOx pulverized coal burner is linearly increased with fuel-nitrogen fraction of coal.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.626-631
• /
• 2013

Gas turbine systems are applied extensively in energy supplies to cover peak load requirements. The gas turboset must be accelerated by starting device up to 60%~80% of rated speed to ignite the gas turbine. Recently, the most favorable and economical starting device is the LCI(Load Commutated Inverter). The LCI runs up the gas turboset by feeding the generator as a synchronous motor. In this paper, we discuss in detail the driving principles and features of 183MW gas turbine system. During field application of LCI system, many tests have been conducted and the results were described in this paper. The test results will be considered as the important resources for development in future.