• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.19-22
• /
• 2009

Design and performance evaluation of $H_2O_2$ monopropellant thrusters to be used at attitude control of space launch vehicles were presented in this paper. Flight model thrusters were designed after two reactors for 100, 250 Newton were conformed at engineering model. Each thruster was evaluated by measurement of characteristic velocity, thrust, specific impulse, and pulse response times.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.91-97
• /
• 2004

In this paper, we conducted basic study on the reliability management that is a key factor to develop highly-reliable launch vehicles, and proposed the strategy for reliability management that can be applied to the KSLV program. Based on the analysis of international launch vehicles data, this paper also presented the reliability target that is essential for Korea's entering into the international commercial market.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.483-486
• /
• 2002

Injection of microbubbles and/or polymer solution has been known to be a promising method for the reduction of frictional drag of water-borne vehicles. Naval Architects have been interested in friction drag reduction technology, since the friction drag of a commercial ship can be over $70{\%}$ of total resistance. The reduction of friction drag is also important for autonomous underwater vehicles and naval submarines to improve their durability and survivability In this study two sets of experiments were carried out for the friction drag reduction of 2-D channel wall and flat plate in the circulating water channels in Chungnam National University. Preliminary results from the experiments are presented and discussed.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.415-420
• /
• 2005

Korea High Speed Railway of which wheels have been excessively worn during the trial operation prior to opening was additionally applied with solid lubricant besides the existing oil lubricant in order to overcome such excessive wear. Therefore, it was shown that wear status has been improved in the test by which railway system including vehicles and tracks was stabilized during a year's commercial operation, comparing to that with excessive wear in the trial operation prior to opening to the public. In this connection, wheel's wear per mileage was analyzed, based on vehicles in service in order to make out the wheel's wear at present, from which the useful data relating to wheel maintenance could be obtained.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.809-815
• /
• 2007

The floor structure of railway vehicles consists of plywood, rubber, and wood keystone plate which affects on the comfort of passengers. Its structural characteristics has been investigated experimentally and numerically for samples of beam and plate structure, and the real floor structure in this paper. The material properties of etch part measured directly by experiments. The deformation and stress distribution of the sample beams for 6 different joints were sought experimentally and calculated using a commercial software. The numerical calculation shows that the effect of friction and clearance between joints is crucial. The DMU/EMU plates were also experimented and compared for different loading conditions. The structural characteristics of the whole floor structure were calculated numerically. The results show that the method of joint between plywoods is an important factor to decide the strength of the floor structure of railway vehicles.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.923-931
• /
• 2008

Coupling rubber pad are important components in railway vehicles. It can be used for reduce shock, vibration and noise. Simple tension, equi-biaxial tension and pure shear test were performed to acquire the coefficient of rubber material which were Mooney-Rivlin and Ogden model. The finite element analysis was executed to evaluate the behavior of deformation and stress distribution by using the commercial finite element analysis code. Useful life evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, useful life prediction of rubber pad for railway vehicle were experimentally investigated. Accelerated heat-aging test for rubber material were carried. Compression set results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.177-184
• /
• 2002

The concrete median barriers are the most popular safety appurtenances that can be installed on narrow medians and are effective in keeping uncontrolled vehicles from crossing into opposing lanes of traffic. It is necessary to install and maintain median barriers because it is very difficult to reserve enough room required for medians in KOREA. And concrete median barriers are accepted as the actual alternatives for median barriers, mostly because they require almost no maintenance even after serious collisions. Typical concrete median barriers are 810mm high and have 596mm high glare screens on top of them. But we have experienced a number of “climb” and “roll-over” accidents of heavy vehicles until now, and most of all, there have been some serious accidents caused by the part of broken glare screens. We have performed many computer simulations for the evaluation of the crashworthiness of concrete median barriers, and through the simulations we have tried to find a proper type of concrete median barrier.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.72-77
• /
• 2008

The function of the Reaction Control System include roll, pitch and yaw control of the launch vehicles and fine control maneuvers and precision upper stage orientation before separation of one or more payload. This paper describes the overview of commercial launchers, current technology trend for RCS of launch vehicles, and development status of medium class thruster for RCS.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.43-54
• /
• 2019

Currently, the use of unmanned aerial vehicles (UAVs) is spreading from recreational purposes to the public- and commercial-use product areas. Various efforts are being made worldwide to ensure the safety of UAVs and expand their service applications and convenience, because autonomous flights are becoming increasingly popular. In order for a UAV to perform autonomous flight and mission without operator assistance, environmental perception technology, path planning technology, and flight control technology are needed. In this article, we present recent trends in these technologies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.55-66
• /
• 2020

This study developed four algorithms and their associated indices that can quantify and qualify road hazards along roadways. Initially, relevant raw data can be collected from commercial vehicles by camera and DTG. Well-processed data, such as potholes, road freezing, and fog, can be generated from the Integrated management system. Road hazard algorithms combine these data with road inventory data in the Data Sharing Platform. Depending on well-processed data, four different road hazard algorithms and their associated indices were developed. To test the algorithms, an experimental plan based on passive DTG attached in probe vehicles was performed at two different test locations. Selection of the test routes was based on historical data. Although there were limitations using random data for commercial vehicles, hazardous roadways sections, such as fog, road freezing, and potholes, were generated based on actual historical data. As a result, no algorithm error was found in the entire test. Because this study provides road hazard information according to a section, not a point, it can be practically helpful to road users as well as road agencies.