• IE interfaces
• /
• v.7 no.1
• /
• pp.67-74
• /
• 1994

In this study, we propose an integrated CAD(Computer Aided Design) library database in a heterogeneous commercial ECAD(Electronic CAD) environment. To effectively solve engineering problems focused on BOM data extraction we use a software system called schematic capture and company-wide standard electronic part information loaded on different commercial ECADs. We unify many commercial ECADs into one schematic capture and a variety of PCB(Printed Circuit Board) design tools. For this purpose we develope a model for linking CAD symbol library with company-wide standard part information. We also develope a schematic design data conversion scheme and show how to extract PBA level BOM data using our customized schematic capture. This system is being operated in an X-Window based engineering work station and commercial RDBMS base.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.517-520
• /
• 2003

Commercial video scope use CCD sensor and frame grabber for image capture and A/D interface but application limited by input resolution and high cost. In this paper we introduce portable video scope using CMOS sensor, USB pen and tuner card (low frame grabber) in place of commercial CCD sensor and frame grabber. Our video scope serves as an essential link between advancing commercial technology and research, providing cost effective solutions for educational, engineering and medical applications across an entire spectrum of needs. The software implementation is done using Direct Show in second version after initial trials using First version VFW (video for window), which gave very low frame rate. Our video scope operates on windows 98, ME, XP, 2000. The drawback of our video scope is crossover problem in output images caused due to interpolation, which has to be rectified for more efficient performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.47-54
• /
• 2006

In this study, an optimum support design problem is considered to minimize displacement of stacked plates under self weight condition. During the displacement analysis, several kinds of contact arise between the plates themselves and support bar. These can be easily considered if commercial analysis software, which provides capability to solve the contact problem, is used. It is found, however, that the computing time is extraordinarily long due possibly to the generality of the software and also to the ignorance of the control parameters used in the software. In this paper, the contact condition is imposed directly by the authors, while the software is used only to solve the ordinary displacement analysis problem. In this way, the computing time is decreased remarkably by more than 30 times, while yielding the same accurate results. Optimization is conducted based on this efficient analysis method to find minimum number of supporting bars using the response surface algorithm.

• Informatization Policy
• /
• v.20 no.1
• /
• pp.85-109
• /
• 2013

This study presents a model and its implementation methodology assessing not only maturity but also applicability in order to increase the practical usage of open source software(OSS). Since this model measures applicability which can not be assessed by the previous models, it is able to support users in many ways when they introduce OSS for the first time, replace commercial software with OSS, and compare OSS with commercial software. For the purpose of design and implementation of this model, we presented a methodology with 7 phases and conducted a survey to evaluate the appropriateness and reliability of the model. In addition, we proved the practical usability of the model by providing a practical example assessing maturity and applicability of OSS in the area of the infra category on the basis of the methodology. In the future, not only general users but also officers in charge of informatization will be able to select optimal OSS by using this model for industrial application. Therefore, the result of this research is expected to greatly contribute to OSS promotion policy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.469-480
• /
• 2017

For accurate AEP prediction in a wind farm, it is necessary to effectively calculate the wind speed reduction and the power loss due to the wake effect in each wind direction. In this study, a computer program for AEP prediction considering directional wake effect was developed. The results of the developed program were compared with the actual AEP of the wind farm and the calculation result of existing commercial software to confirm the accuracy of prediction. The applied equations are identical with those of commercial software based on existing theories, but there is a difference in the calculation process of the detection of the wake effect area in each wind direction. As a result, the developed program predicted to be less than 1% of difference to the actual capacity factor and showed more than 2% of better results compared with the existing commercial software.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2017

This paper describes the system engineering approach for the heat transfer analysis of plus7 fuel rod for APR1400 using, a commercial software, ANSYS. The fuel rod is composed of fuel pellets, fill gas, end caps, plenum spring and cladding. The heat is transferred from the pellet outward by conduction through the pellet, fill gas and cladding and further by convection from the cladding surface to the coolant in the flow channel. The goal of this paper is to demonstrate the temperature and heat flux change from the fuel centerline to the cladding surface when having maximum fuel centerline temperature at 100% power. This phenomenon is modelled using the ANSYS FEM code and analyzed for steady state temperature distribution across the fuel pellet and clad and the results were compared to the standard values given in APR1400 SSAR. Specifically the applicability of commercial software in the evaluation of nuclear fuel temperature distribution has been accounted. It is note that special codes have been used for fuel rod mechanical analysis which calculates interrelated effects of temperature, pressure, cladding elastic and plastic behavior, fission gas release, and fuel densification and swelling under the time-varying irradiation conditions. To satisfactorily meet this objective we apply system engineering methodologies to formulate the process and allow for verification and validation of the results acquired. The close proximity of the results obtained validated the accuracy of the FEM analysis of the 2D axisymmetric model and 3D model. This result demonstrated the validity of commercial software instead of proprietary in-house code that is more costly to develop and maintain.

• Cartoon and Animation Studies
• /
• s.15
• /
• pp.123-137
• /
• 2009

This thesis is about to find possible opportunity to use Freeware Software in development and application of Digital Contents Creation software. There are 2D composition and Editing software, 3D production software and rendering Software as major part and motion capture, 3D Digitizing and other software operate in and out facilities in small part in Digital Contents Creation Software area. Most of Digital Contents Creation Software made by foreign countries such as USA and Canadian film, game and animation Digital Contents Creation industry, this causes higher production cost and lower profit of studios and usage of illegal copy of Digital Contents Creation Software as well. This thesis tried to present a solution to use Freeware Software in production process by researching and analyzing international and domestic software market and global trend of Freeware Software and present Freeware Software software in each production steps. This thesis include performance test of commercial render Freeware software.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.219-226
• /
• 2000

Frictional performance of ring pack in internal engine is investigated by varying spatial dimensions of ring pack and operating speed. This investigation is performed with commercial software by Ricardo Consultant Engineers, Inc. which is now in wofdwide use in automobile industries. Among the ring performances, blow-by rate, axial ring motions and frictional behaviors of top and second rings are studies in our work.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.31-37
• /
• 2001

In this paper, a method to improve judder by changing the front and rear wheel brake force distribution ratio was proposed. ADAMS, a commercial dynamic analysis software was used to model a small size bus and its modeling procedure was explained. By using the ADAMS vehicle model, the judder phenomena of the small bus were analyzed, and based on analysis results, the validity of the improvement method was proposed. Also in order to lessen the problem jubber sensitivity analysis and test results were proposed.

• International Journal of Computer Science & Network Security
• /
• v.23 no.12
• /
• pp.187-193
• /
• 2023

Large software systems are being produced with a noticeably higher level of quality with component-based software engineering (CBSE), which places a strong emphasis on breaking down engineered systems into logical or functional components with clearly defined interfaces for inter-component communication. The component-based software engineering is applicable for the commercial products of open-source software. Software metrics play a major role in application development which improves the quantitative measurement of analyzing, scheduling, and reiterating the software module. This methodology will provide an improved result in the process, of better quality and higher usage of software development. The major concern is about the software complexity which is focused on the development and deployment of software. Software metrics will provide an accurate result of software quality, risk, reliability, functionality, and reusability of the component. The proposed metrics are used to assess many aspects of the process, including efficiency, reusability, product interaction, and process complexity. The details description of the various software quality metrics that may be found in the literature on software engineering. In this study, it is explored the advantages and disadvantages of the various software metrics. The topic of component-based software engineering is discussed in this paper along with metrics for software quality, object-oriented metrics, and improved performance.