• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.319-325
• /
• 2020

Widespread consumption of fresh-cut vegetables without cooking results in ingestion of major foodborne pathogens including Bacillus cereus. In this study, we aimed to develop a method to rapidly detect B. cereus in fresh-cut vegetables by combining commercial PCR analysis with enrichment of the pathogenic levels. A mixture of B. cereus strains (KCTC1013, KCTC1014, KCTC1092, KCTC1094, and KCTC3624) was inoculated on the surface of fresh-cut cabbage lettuce (20 g) and baby leafy vegetables (10 g) to concentration 1, 2, 3, 4, and 5 log CFU/g. Eighty milliliters of TSB with 0.15% polymyxin B was used for cabbage lettuce, and 90 mL of medium was used for baby leafy vegetables and incubated at 42℃ for 0, 2, 3, 4, 5, 6, and 7 h. One milliliter of the enriched media was plated on mannitol-egg yolk-polymyxin agar for quantification, and another 1 mL was used for DNA extraction for PCR analysis. Additionally, the minimum number of sub-samples to be tested from a pack of fresh-cut vegetable samples was determined using 5 sub-samples. The results from this study showed that for detecting B. cereus in fresh-cut cabbage lettuce, 3, 4, 5, 6, and 7 h enrichment were required to at least detect 5, 4, 3, 2, and 1 log CFU/g of B. cereus, respectively. B. cereus in fresh-cut baby leafy vegetables could be detected after 2, 3, 4, 5, and 6 h of enrichment at 5, 4, 3, 2, and 1 log CFU/g, respectively, using a combination of enrichment and PCR analysis. To determine if a pack of fresh-cut vegetable is positive, the minimum number of sub-samples should be 3. These results can be used to develop a rapid detection method to semi-quantify B. cereus in fresh-cut vegetable samples combining enrichment and PCR.

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.136-142
• /
• 2016

Lespedeza species are mainly used for wildlife food and cover and for erosion control. The germination of these species can be enhanced after a fire occurrence in forest, which is known as fire-activated seeds to germinate. While the heat treatment could break seed dormancy of Lespedeza, its germination rate was quite low. We investigated that chemical scarification could promote germination of L. tomentosa. Seeds were soaked in 100% sulfuric acid (H₂SO₄) for 0, 1, 3, 6, 12, 24, 48, 96, 192, and 384 min, and then washed in distilled water for 24 h. Very few seeds were germinated in control (H₂SO₄ for 0 min). More than 90% of seeds were germinated in H₂SO₄ for 24, 48, and 92 min. However, some damage was observed in roots and cotyledons of seedling dipped in H₂SO₄ for a long time. To search the optimal soaking time in H₂SO₄ without defects, seeds scarified in H₂SO₄ for 30, 60, 90, 120, 150, 180, and 300 min were sown the commercial soil medium. Seeds treated with H₂SO₄ for 90 min and 150 min emerged by about 92% and 84%, respectively. Therefore, H₂SO₄ treatment could break the seed dormancy of Lespedeza species, and especially in case of L. tomentosa the optimal treatment time in sulfuric acid was one to two hours. Germination of L. tomentosa began promptly following the scarification and was completed within about one month, indicating that seeds has no physiological dormancy, just has physical dormancy.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.511-515
• /
• 2012

In this study, we used a commercial simulator to investigate the gasification characteristics of Roto coal in the partitioned fluidized-bed gasifier, which consists of 4 parts such as coal pyrolysis, char gasification, tar/oil gasification and char combustion. The heating medium was exchanged between the combustion part and the gasification part in order to supply the energy needed for pyrolysis and gasification. The correlation model from experimental data in relation to the reaction temperatures, the reaction gases and the coal feed rates was derived for the coal pyrolysis. The equilibrium model was used for the gasification and the combustion model for the char combustion. In order to compare the reaction behavior of the partitioned fluidized-bed gasifier, the single-bed gasifier was also simulated. The cold gas efficiency of both partitioned fluidized-bed gasifier and single-bed gasifier was almost the same. The $H_2$ and $CH_4$ contents of the syngas in the partitioned fluidized-bed gasifier slightly increased and the CO and $CO_2$ contents slightly decreased, compared with the singlebed gasifier. In order to verify the model, ten cases of the single-bed gasification experiment have been simulated. The contents of CO, $CO_2$, $CH_4$ in the syngas from the simulation corresponded with the experimental data while those of $H_2$ was slightly higher than experimental data, but the tendency of $H_2$ content in the syngas was similar to the experiments. In the coal conversion, the simulation results were higher than the experiments since equilibrium model was used for the gasification so that the residence time and contact time in the model is different from the experiments.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.407-414
• /
• 2018

This study was aimed to evaluate the effect of application method and concentration of gibberellin $A_3$ ($GA_3$) on the growth, runner production, and seedling quality of strawberry plants (Fragaria ${\times}$ ananassa Duch. cv. Maehyang) during nursery period. The mother plants of strawberry were transplanted in pot ($64{\times}27{\times}18cm$) filled with commercial growing medium on March 20, 2018. $GA_3$ concentration was applied as 0, 50, 100 or $200mg{\cdot}L^{-1}$ with spray or drench to 45 mL per plant at 4 weeks after transplanting, respectively. Nutrient solution was supplied with the EC $1.5dS{\cdot}m^{-1}$ after the transplanting and supplied 350 mL per pot twice a day (15 min per one time) after rooting. The growth characteristics of mother plants of strawberry were measured at 7 weeks after treatment, and growth characteristics of daughter plants of strawberry were measured at 10 weeks after treatment. Runner length and diameter of mother plant was the longest or thickest in the spray with $200mg{\cdot}L^{-1}$ than the other treatments, respectively. Soil-plant analysis development (SPAD) value of mother plant was the lowest in spray with $200mg{\cdot}L^{-1}$. However, leaf length, leaf width, and crown diameter showed no significant differences in all treatment among application method and concentration of $GA_3$. As the concentration of $GA_3$ increased, physiological disorder like stretchiness of crown occurred more. The physiological disorder was the most occurred in spray treatment with $200mg{\cdot}L^{-1}$, but drench treatment occurred less than spray treatment. The number of runners and daughter plants increased with increasing concentration of $GA_3$ regardless of application methods. In the growth characteristics of the daughter plants, leaf length and leaf width of first daughter plant, plant height, crown diameter, leaf area and SPAD value of second daughter plant, and plant height of third daughter plant were the significantly greatest in drench with $100mg{\cdot}L^{-1}$ treatment. This results indicate that growth and runner production of mother plants and growth of daughter plants of strawberry were the best achieved by drench application in the $100mg{\cdot}L^{-1}$ $GA_3$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.673-682
• /
• 2001

The use of resin composites has continued to increase over the last several years. In spite of their growing popularity, composites continue to exhibit a number of undesirable characteristics. One of the major deficiencies of composite restorative resins is their inadequate resistance to wear. Of the multitude of factors that have been associated with wear, subsurface degradation within the restoration is considered to be one. The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. This solution with a high concentration of hydroxyl ions is a convenient medium for accelerated degradation of silane coupling and filler particles. The brands studies were Definite($Degussa-H\ddot{u}ls$ AG, Germany), Prodigy(Kerr, USA), Pyramid(Bisco, USA) and Synergy(Coltene, Swiss). Preweighed discs of each brand were exposed to 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters : (a) mass loss(%)-determined from pre-and post-exposed specimen weights : (b) Si loss(ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation $depth({\mu}m)$-measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. Mass loss of Synergy was $1.24{\pm}0.002%$, it was the highest, there was no significant difference among the materials. 2. The degree of degradation layer depth of Synergy was $107.83{\pm}2.52{\mu}m$, it was the highest, there was no significant difference among any other materials than Synergy. 3. There was no difference among the four materials in Si loss. 4. The correlation coefficient between mass loss and degradation depth was relatively high(r=0.06, p<0.05). 5. There was no coefficient correlation between Si loss and mass loss, the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler.

• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.242-248
• /
• 1979

To detect proper lytic assay conditions of the crude zumolyase from Arthrobacter luteus, effets of the various factors involved in the lytic system of Sacchromyces sake cultured with shaking in the malt extracts medium were investigated. The results are summarized as follows : 1. The susceptibilities of viable cells of S. sake from logarithmic growth phase to the lytic enzmye were much greater than those of the cells in lag and stationary phases. The cells cultured for 18 hr were the most susceptible to the enzyme. 2. Lytic activity of the enzyme toward the viable cells of S. sake was very low. It was, however, enhanced 4 folds of more by the pretreatment of the cells with 0.05 M sodium sulfite. 3. Lytic activity of the enzyme toward commercial baker's yeast cells was negligible, and the effect of sodium sulfite on the lysis of the cells also was nothing but a little. 4. The lyophilized cells of the baker's yeast showed more susceptibility to the lytic enzyme than viable cells of the yeast. No definite effect of sodium sulfite on the lysis of the lyophilized cells, however, was observed either baker's yeast of S. sake. 5. It appeared that the relationship between the reaction rate and the enzyme concentration on the lysis of the yeast cell walls followed enzyme kinetic theory, but one between the reaction rate and concentration of the yeast cells as substrates showed different pattern from that in enzyme kinetic theory. 6. After the preparation of crude zymolyase was kept at $7^[\circ}C$ for 10 days in the 0.05 M phosphate buffer, pH 7.5, the remainning lytic activity was about 80 %.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.70-82
• /
• 2015

This study was conducted to establish an efficient screening system to identify melon resistant to Fusarium oxysporum f. sp. melonis. F. oyxsporum f. sp. melonis GR was isolated from infected melon plants collected at Goryeong and identified as F. oxysporum f. sp. melonis based on morphological characteristics, molecular analyses, and host-specificity tests on cucurbits including melon, oriental melon, cucumber, and watermelon. In addition, the GR isolate was determined as race 1 based on resistance responses of melon differentials to the fungus. To select optimized medium for mass production of inoculum of F. oxysporum f. sp. melonis GR, six media were tested. The fungus produced the most spores (microconidia) in V8-juice broth. Resistance degrees to the GR isolate of 22 commercial melon cultivars and 6 rootstocks for melon plants were investigated. All tested rootstocks showed no symptoms of Fusarium wilt. Among the tested melon cultivars, only three cultivars were susceptible and the other cultivars displayed moderate to high resistance to the GR isolate. For further study, six melon cultivars (Redqueen, Summercool, Superseji, Asiapapaya, Eolukpapaya, and Asiahwanggeum) showing different degrees of resistance to the fungus were selected. The development of Fusarium wilt on the cultivars was tested according to several conditions such as plant growth stage, root wounding, dipping period of roots in spore suspension, inoculum concentration, and incubation temperature to develop the disease. On the basis of the test results, we suggest that an efficient screening method for melon plants resistant to F. oxysporum f. sp. melonis is to remove soil from roots of seven-day-old melon seedlings, to dip the seedlings without cutting in s pore s uspension of $3{\times}10^5conidia/mL$ for 30 min, to transplant the inoculated seedlings to plastic pots with horticulture nursery media, and then to cultivate the plants in a growth room at 25 to $28^{\circ}C$ for about 3 weeks with 12-hour light per day.

• The Journal of Art Theory & Practice
• /
• no.5
• /
• pp.43-80
• /
• 2007

PASKYULA was formed in September, 1923 through the union of artists involved in two art groups: Kim Ki-Jin, Kim Bok-Jin, Yeon Hak-Nyeon who had previously participated in the ToWolHoi, and Park Young-Hi, Lee Sang-Hwa, An Seok-Ju, former members of the BaeckJo. After its founding, the PASKYULA artists had been searching for the social function of art to reform the harsh reality of Minjung and the nation with criticism toward society as well as art world. Their art theory for MinJung could grow relatively ease in relation to changing social and political conditions in the early 1920s. In August, 1925, PASKYULA organized the Korea Artista Proletaria Federatio with the YeomGunSa, and laid the groundwork for Proletariat art movement which was regularized in the late 1920s. From PASKYULA up to the early state of KAPF, the theory of art advocated by Kim Bok-Jin and An Seok-Ju could be summarized as "art for MinJung". At that time, widely ranging discourses on MinJung, however, was spawned in art theory, because many intellectuals-including artists and writers-begun to pay more attention to MinJung, who emerged as one of the social forces after the Samil Independent Movement. Sometimes, MinJung was construed as the target of enlightenment from a negative viewpoint. On the other hand, several intellectuals under the influence of individualism asserted that the discussion itself on MinJung exerted an evil influence on art. In contrast of these cases, the PASKYULA artists including Kim Bok-Jin, An Seok-Ju perceived that MinJung had the potential to change society, and regarded them as "a creator of genuine civilization and art". In the PASKYULA artist's writings, the concept of MinJung was often overlapped with the meaning of the Choson nation suffering under colony. Although their concept of MinJung was transformed gradually into the proletariat as they were under the strong influence of socialism, it did not change that they grasped the realities of the whole Choson Peninsula through the proletarian consciousness. In the early state of PASKYULA, the methodology for social function of art was presented in a twofold manner. First of all, Kim Bok-Jin emphasized on the necessity of education to improve MinJung's way of life through art, and it was embodied by the organization of ToWol Art Workshop and public lecture. Also, he championed "the popularization of art", which was one of methods to distribute art to MinJung. According to the PASKYULA artists, art should be not art for art' sake but art for MinJung. That was why they advocated the convergence of art and MinJung's life. Especially Kim Bok-Jin affirmed a link between art and industry because he considered industry the field inextricably linked with MinJung's life. In this context, his idea could be read as the generalization and equalization within the framework of possession. Kim Bok-Jin thought that the social ramifications of capitalism deprived MinJung of their right to enjoy art, and emphasized the artist' social role to return the right to them. That is, the even distribution of art was mainly discussed than the contents of art in the half of 1920s. By 1925, the contents of art itself became an issue in the PASKYULA art theory, and it was based in realism. Kim Bok-Jin and An Seok-Ju insisted that art should be reflection of real life. At that time, realism acquired the representation of MinJung and the nation's realities not realistic style. In fact, the various Western art styles including Futurism, Constructivism, Cubism etc. were exploited in the PASKYULA's visual images. Western art, target of criticism on theory, was selectively adopted in the works which were produced by Kim Bok-Jin and An Seok-Ju. Kim Bok-Jin's MoonYeUnDong cover design was conceived of as the example in which Western art was adopted with it's ideology under the influence of MAVO, while Western art shown in An Seok-Ju's illustrations served as a decorative function in many cases. Especially, An Seok-Ju attempted the various styles of Western art simultaneously, which may be seen as representing that PASKYULA did not have a firm ideology for their style. Also, it can be read as showing his hasty zeal to overcome Western art rapidly. The wish to establish "art for MinJung" as soon as possible was accompanied with the will to jump over the all steps of Western art though it was superficial. This aspiration of PASKYULA was expressed through the mass media, which had the potential for communicating to MinJung. At this point, there was a significant disparity between PASKYULA and another art groups in the first half of 1920s. However, the PASKYULA's method on the basis of the mass media could not but have a certain limitation because of the medium's properties. Nevertheless, PASKYULA' attempts may be considered to be valuable in sense that they expended the boundaries of Korean modern art into the commercial art questioning the matter of the distribution for art.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.22-29
• /
• 2011

The experiment investigated effect of duration, temperature, and light condition during chilling treatment on growth and flowering of four Campanula species in a factorial experiment. Two parent species, Campanula punctata Lam. var. rubriflora Mak. and C. Punctata Lam., and their two $F_1$ hybrids, C. punctata Lam. ${\times}$ C. punctata Lam. var. rubriflora Mak. ('Jiknyeo') and C. punctata Lam. var. rubriflora Mak. ${\times}$ C. punctata Lam. ('Gyeonu'), were used. Plants were cultured in vitro for five weeks at $25^{\circ}C$ under about $75{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD before being chilled at 4 or $25^{\circ}C$ for 3, 6, or 9 weeks under a darkened or lighted (about $10{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD) condition. After chilling treatment, plants were transplanted to 10 cm pots filled with a commercial growing medium and were transferred to environment-controlled growth chambers and subsequently to a greenhouse to observe their reproductive growth. Growth of all species and flowering of a $F_1$ hybrid 'Jiknyeo' were affected by duration, temperature, and light condition during chilling treatment. The greatest growth and survival percentage were observed in C. punctata Lam. var. rubriflora Mak. The survival percentage was greater when plants were chilled in a lighted than darkened condition, whereas it decreased when plants were chilled more than six weeks in vitro. Among the four species tested, flowering was observed only in a $F_1$ hybrid 'Jiknyeo' with 62.5% flowering plants when it was chilled at $25^{\circ}C$ for three weeks under a lighted condition. Percent flowering plant was affected by duration, temperature, and light condition during chilling treatment. Three-week chilling at $4^{\circ}C$ under a darkened condition significantly reduced days to flowering. These results suggest that the low temperature requirement for flowering is not qualitative but quantitative in Campanula species. Further experiment with more number of plants is necessary to ascertain this conclusion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.