• Journal of Environmental Science International
• /
• v.10 no.1
• /
• pp.9-12
• /
• 2001

In this study, development of new sound absorbent which is safety, economical and efficient with using recycled materials is tried for substitution of commercial sound absorbent. The sound absorbents, used in this investigation, were made of used paper or filters of cigarette butts. With the variation of the material densities, sound absorptions of materials were measured. The impedance tube method is used for measuring sound absorption coefficient of the new sound absorbent materials. The measured frequency range was 250Hz to 4000Hz in 1/3 octave band. The sound absorption coefficient of the commercial materials and that of the materials synthesized in the our laboratory show almost same value.

• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.141-150
• /
• 2013

Multiplexers based on isolation circuits made of metamaterial lines are proposed and studied. The new approach provides unique advantageous features beneficial to system designer. For instance, there is no need to modify the filters used in multiplexers. Also, the design process is straightforward. In this paper, two types of multiplexers based on metamaterial isolation circuits are presented, and their operation concepts are explained. Also, theories and design process of isolation circuits are presented to help readers design and fabricate proposed multiplexers. For verifying the concepts, two types of triplexers and two types of quadruplexers are designed and fabricated. All filters used in the multiplexers are commercial surface acoustic wave filters. The measured results are well matched with the simulation results.

• Carbon letters
• /
• v.26
• /
• pp.74-80
• /
• 2018

The South Korean Ministry of the Environment has revised the laws relating to the management of interior air quality for multiple use facilities, and recommends maintaining carbon dioxide ($CO_2$) concentration in passenger vehicles below 1000 ppm during operation in urban areas of large cities. However, the interior $CO_2$ concentration of passenger vehicles can rapidly increase and exceed 5000 ppm within 30 min, as observed when two passengers are traveling in urban areas of the South Korean city of Jeonju with the air conditioner blower turned off and the actuator mode set to internal circulation mode. With four passengers, $CO_2$ concentration can reach up to 6000 ppm within 10 min. To counter this, when the actuator is set to external mode, $CO_2$ concentration can be maintained below 1000 ppm, even after a long period of running time. As part of the air conditioning system, alkali-treated activated carbon fiber filters are considered to be far superior to the commercial non-woven filters or combination filters currently commonly in use.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.52-57
• /
• 2014

In this paper, designs and test results of X-band Tx and Rx filters for satellite communications are presented. The passbands are 7.9 ~ 8.4 GHz and 7.25 ~ 7.75 GHz for the Tx filter and the Rx filter respectively. Both of the filters require very high rejection performance between the two passbands. In order to make these filters in an in-line type, non-resonating node method was adopted and E-plane junction was used for the non-resonating node. Design procedures of circuit model design and full-wave electromagnetic model design are described. The test results show that all the performances meet requirements including temperature variations and the sizes are smaller than those of domestic commercial filters by about 30 ~ 40 %.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.83-90
• /
• 2001

Conventional SAW duplexer filters employ a 1/4 wavelength transmission line, which causes difficulty in fabrication of the strip line on the package. Its manufacturing process is also complicated, because it needs integrating process of the separate transmitting filter, receiving filter and isolation circuits. This paper concerns development of a new structure of the duplexer filter that has all the transmitting filter, the receiving filter and the isolation circuit as a one chip device. For composition of the duplexer, we design the component SAW ladder filters and the isolation network consisting of lumped inductor and capacitor elements. Performance of the whole duplexer is optimized by the nonlinear multivariable minimization of a proper target function, and the result is compared with that of commercial filters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1205-1223
• /
• 2020

This research investigated the protective effect on hair for 3 commercial hair oil products containing UV filters upon UVA and UVB irradiation. Hair tresses each weighing 2 g were prepared from black virgin hair. Hair tresses treated with 0.5 g of hair oil were irradiated by UVA (365 nm) and UVB (302 nm) lamp for up to 600 hours. Color of hair was measured using a spectrocolorimeter, tensile strength and elongation of hair were measured using a biological tensile tester, surface morphology was examined using a scanning electron microscope. Experimental results were analyzed using SPSS statistical software. Hair color and tensile strength were both affected by UVA and UVB irradiation. Significant differences in the color and tensile strength were observed between untreated hair and hair treated with hair oils. Good UV protective effect observed in Oil 2 and Oil 3 was attributable to the type and the combination of UV filters contained in the products.

• Journal of Environmental Science International
• /
• v.32 no.2
• /
• pp.131-137
• /
• 2023

Filter and microbalance sensitivity in measuring fine particulate matter mass is greatly influenced by particulate properties and environmental factors. Temperature and humidity control inside a measuring chamber with a microbalance, and neutralization of static charges on filters are essential for consistent filter weighing. Commercial weighing chambers are expensive with a unit price of tens of millions won. This study developed an inexpensive weighing chamber for weighing fine particulate matter and evaluatedits weighing performance. A microbalance with 1 ㎍ precision was used to measure the weight of a filter. The microbalance was set in a transparent acrylic enclosure (100 × 60 × 65 cm³) equipped with temperature and humidity control equipments. Weighing performance of the chamber was examined using Teflon filters with or without different particulate sample types. Temperature and humidity were maintained at approximately 23.2±1.2 ℃ and 36.2±1.8℃ for 8 days, respectively.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.225-228
• /
• 2004

This paper has been studied about UWB(Ulra wide-band)'s LNA(Low Noise Amplifier) and Mixer. The UWB is a new technology that is being pursed for both commercial and military purposes. Direct conversion architectures that convert RF signals have potential to achieve such terminals, because they eliminate the need for non-programmable image-rejection filters and IF channel filters. And this architecture promises better performance in power, size, and cost than existing heterodyne - based receivers. This Receiver architectures combines low-noise amplifier, mixer. And then this paper has designed suitable UWB's LNA and Mixer.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1086-1098
• /
• 2018

This study presents a new sensorless commutation method for brushless direct current motors to replace Hall sensor signals with virtual Hall signals. The importance of the proposed method lies in the simultaneous elimination of the phase shifter and the low-pass filters, which makes the method simple and cost-effective. The method removes high ripple switching noises from motor terminals, thereby decreasing motor losses. The proposed method utilizes unfiltered line voltages with notches caused by current commutation. Hence, specific sign signals are defined to compensate for the effects of commutation noise. The proposed method is free from phase delay that originates from low-pass filters. The method directly produces virtual Hall signals, and thus, it can be interfaced with low-cost commercial commutation integrated circuits based on Hall sensors. Simulation and experimental results show the effectiveness and validity of the proposed method.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.67-73
• /
• 2003

This study was carried out to characterize the behavior and sources of particulate trace metal in Daegu city. TSP (Total Suspended Particulate matter) was collected by filters on High Volume Air Sampler from the four areal (reference, residential, commercial, industrial area). The moult were analyzed by AAS after preliminary treatment. The average centration trend of trace metals contained in TSP was shown as follows : Fe > Cu > Pb > Mn > Ni > Cr > Cd. The trace metals showed the highest concentration in the industrial area. This study showed the seasonal variation of trace metals. Fe and Mn showed high concentration in spring, whereas Cr, Ni, Cd and Pb showed high concentration in winter. Also this study showed the regional variation of trace metals. The order of the average concentration of trace metals was : industrial > commercial > residential > reference area. Using Mn as a reference element, the enrichment factor analysis were used for identifying the trace element contributors. The enrichment factors of Cr, Fe < 10 were considered to have a significant dust and soil source and termed nonenriched. Pb, Cd, Cu >>10 were enriched and had a significant fraction which was contributed by anthropogenic sources.