• Elastomers and Composites
• /
• 제44권4호
• /
• pp.401-407
• /
• 2009

용액중합 스티렌-부타디엔 고무 컴파운드 가교체의 균열저항성 및 마모특성에 미치는 공정오일의 영향을 조사하기 위해 방향족 고리화합물(PCA) 성분을 다량 함유하고 있는 방향족 오일과 저 PCA 오일을 선택하였다. 인장강도 및 인열강도 결과에 의하면 방향족 오일함유 컴파운드가 저 PCA 오일함유 컴파운드에 비해 우수한 물성을 나타내었다. 또한 방향족 오일함유 컴파운드가 균열저항성이 월등히 우수하였고, 특히 인열에너지가 낮은 범위에서 더 우수한 결과를 나타내었다. 마모저항특성은 마찰에너지가 낮은 범위에서는 방향족 오일함유 컴파운드가 우수한 결과를 나타낸 반면, 높은 마찰에너지 범위에서는 저 PCA 오일 함유 컴파운드가 오히려 높은 저항성을 나타내었다.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.246-252
• /
• 2021

Among the engine components of an internal combustion engine, the valve train is a series of systems that supply intake gas to the combustion chamber and operate intake and exhaust valves that discharge exhaust gas. If excessive wear occurs in the valve train system, the suction and exhaust valves do not open and close on time, which leads to abnormal combustion and exhaust gas. In this study, we conduct experiments and analyses on friction and wear characteristics of the valve train system. Moreover, we experimentally study the correlation between the pinball and pinball cap on engine oil lubrication, friction experiment, wear amount analysis, and surface analysis. Specifically, we experiment using Ball on reciprocating tribo-tester and apply commercial engine oil sold on the market engine oil. We construct the experimental conditions for each new oil and oil. Accordingly, the completed specimen was subjected to a confocal microscope to check the wear volume, observe the surface of the specimen, and confirm the elemental components using a scanning microscope (SEM) and an energy dispersion X-ray spectrometer (EDS). Through this experiment, we analyze the friction and wear characteristics of valve train components according to engine oil grade, and the obtained data serve as an effective engine oil management method.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권2호
• /
• pp.112-117
• /
• 2007

본 연구는 수산 폐기물, 폐어망 등 해양 유기성 폐기물을 유류와 같은 대체 에너지 자원으로 개발하기 위한 기초 연구로 수행되었다. 현재까지 폐플라스틱이나 폐타이어와 같은 석유공업을 기반으로 한 유기성 폐기물을 유류자원화 하여 대체연료로 사용하는 연구가 활발하고 상용화된 사례들은 많다. 그러나 주위에 쉽게 버려지는 음식물 쓰레기, 유기성 폐기물을 이용해 대체자원을 개발하는 연구는 미미한 실정이다. 따라서 본 연구에서는 동물성 유기 폐기물을 사용하여 고온고압 하에서 열분해를 이용해 오일을 얻었고, 오일의 성분과 특성을 조사하여 대체자원으로의 가능성을 평가하였다. $250^{\circ}C$, 40 atm에서 열분해한 바이오오일은 점도가 높아 불순물을 제거에 어려움이 있었고, 발열량이 중유(重油)보다 다소 낮았으며, 연료로 사용하기에는 부적합한 다양한 종류의 가스 생성물을 얻었다. 하지만 기존의 열분해 방법들이 $500^{\circ}C$ 이상의 고온에서 반응시키는 것과 달리 대상물질 자체의 수분을 이용해 증기압으로 가압하기 때문에 $250{\pm}5^{\circ}C$의 낮은 온도에서도 열분해 할 수 있었다. 그러나 바이오오일의 점도가 높아 액상연료로 사용하기에는 미흡하였다.

• 한국유체기계학회 논문집
• /
• 제19권1호
• /
• pp.31-36
• /
• 2016

Hydraulic actuator is a primary component of the hydraulic valve systems. In this study, the thrust performance of hydraulic actuator was studied with different values of viscosity of hydraulic oil and rod diameter. Numerical analysis was performed using the commercial CFD code, ANSYS with 2-way FSI(Fluid-Structure Interaction) method and $k-{\varepsilon}$ turbulent model. Results show that increase in viscosity of hydraulic oil reduces the thrust of hydraulic actuator. In order to satisfy the output required of the actuator, it is necessary to compensate for the operating pressure. The results of pressure, velocity and thrust efficiency distributions in the hydraulic actuator were graphically depicted.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.670-676
• /
• 2008

A diesel engine requires a high Performance of lubrication because of the extreme conditions such as high temperature and pressure during combustion process in a cylinder. Many researches to improve the lubrication performance on the extreme condition have been executed. The lubricant oil suspended with nano-metal particles is the one of the measure. In this study, the nano-lubricant oil is applied on a commercial diesel engine, and the engine performance is tested. The results show the increase of maximum torque and the decrease of cylinder pressure, exhaust gas temperature, CO emission.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1-8
• /
• 2005

This paper addresses the analysis of the combustion characteristics in the oil burner using swirl flow. The reduction of exhaust emissions and high efficiency combustion techniques of the industrial burner have been studied to conserve environmental resources. We make swirl burner equal to dimension of wide burner and it is turn round of the combustion gas in construction. For a vigorous inner flow possessde 3m/s velocity in combustion gas of two burners. In calculation, we make use of a densely mesh to detailed analysis. In this study, the effect of swirl flow on the combustion of a commercial burner is analysed by experimental and also simulative manner. The results show the swirl burner has 40% better efficiency and less emissions of CO, HC, NOx and Smoke.

• 한국유체기계학회 논문집
• /
• 제13권6호
• /
• pp.71-76
• /
• 2010

This study has investigated numerically and experimentally the flow characteristic of air-cooling fan for transmission oil cooler in the large-size diesel engine. Impellers of cooler were composed of eight normal-scale and eight small-scale blades in the zig-zag pattern. In order to increase the discharge pressure of cooling fan, turbo type of fan blade is proposed in the impeller for transmission oil cooler. The fluidic performance of cooling fan has been estimated numerically by using the commercial code and experimentally carried out with reference on AMCA Standard 210-99. As a result, it is confirmed that the numerical result for performance curve is in good agreement with experimental data.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.470-478
• /
• 2020

Spent coffee grounds (SCG), the residue after brewing coffee beverage, is a promising biodiesel feedstock due to its high oil contents (15-20%). However, SCG should be pretreated to reduce the high free fatty acid content, which hampers transesterification reaction. To overcome this, we explored a direct transesterification reaction of SCG using ultrasound irradiation and identified the optimal sonication parameters. A high fatty acid methyl ester (FAME) content, up to 97.2%, could be achieved with ultrasound amplitude of 99.2 ㎛, irradiation time of 10 min, and methanol to oil ratio of 7:1 in the presence of potassium hydroxide concentration of 1.25 wt.%. In addition, we demonstrated that ultrasound irradiation is an efficient method to produce biodiesel from untreated SCG in a short time with less energy than the conventional mechanical stirring method. The physical and chemical properties of the SCG biodiesel met the requirements for an alternative fuel to the current commercial biodiesel.

• 한국가금학회지
• /
• 제21권3호
• /
• pp.183-193
• /
• 1994

White Leghorn hens were fed a commercial formula feeds as a basal diet, which was supplemented with 3 types of plant oil safflower, evening primrose and pine seed, at the 10% level for 3 weeks. No significant changes was found between the basal diet and the oil feeding trials in the egg yolk cholesterol content, the laying rate, the egg weight, and the yolk weight, except the feed intake. In the fatty acid composition of the egg yolk lipid, however, the plant oil feedings to hens resulted in considerable increase of $C_{18:2}$ acid with a simultaneous decrease of $C_{18:2}$ acid ,and, consequently, followed by the improvement of balance with P /S and P /M /S ratio close to 1.0 and 1:1:1, which is known a desirable ratio for human health in lipid nutrition, respectively.

• Tribology and Lubricants
• /
• 제29권3호
• /
• pp.143-148
• /
• 2013

In this study, several sensor parts used to obtain better signal stability are designed, a separate control circuit for the sensor is developed, and the results obtained using this control circuit are analyzed. The capacitances of the whole sensor system are measured using the control circuit connected to an improved flexible printed circuit board and an asymmetric dual sensor coated with a ceramic material. To realize good discrimination for a small change in the measured capacitance as the engine oil deteriorates, a commercial application-specific integrated circuit is installed on the control circuit as a capacitance-to-digital converter. The absolute error of a measured signal is found to be approximately ${\pm}4fF$.