• 한국식품과학회지
• /
• 제44권3호
• /
• pp.269-273
• /
• 2012

국내에서 유통되는 식용유지의 벤조피렌 함량과 정제유와 압착유의 제조 공정별 벤조피렌 함량변화를 살펴보았다. 측정된 모든 식용유지의 벤조피렌 함량은 허용한계 이하로 검출되긴 하였으나, 동일한 식용유지라 하더라도 벤조피렌 함량에 큰 차이를 나타내어 원료 및 제조 공정에 따라 최종제품의 벤조피렌을 저감화시킬 수 있음을 확인할 수 있었다. 정제유 및 압착유의 제조 공정별 벤조피렌 함량을 분석한 결과, 정제 공정을 거치면서 원유 및 착유 원유에 함유되어있던 벤조피렌의 함량이 꾸준히 감소되는 것을 확인할 수 있었다. 또한 옥수수유의 경우는 옥수수 배아를 압착 착유하는 과정에서 벤조피렌의 발생이 증가되었으며, 참기름의 경우는 참깨의 볶음 과정에서 벤조피렌이 급격히 발생하는 것을 확인할 수 있었다. 즉 식용유지의 제조 공정 중고온 처리과정에서 벤조피렌의 발생량이 급증하였으며, 이후 정제 공정에서 꾸준히 감소되는 현상을 나타내었다. 이러한 결과는 이후 벤조피렌의 저감화를 위한 공정개선의 기초자료로 활용할 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.204-208
• /
• 2003

This study presents a clutch-by-wire system for automotive which can be utilized on a vehicle with a manual transmission real time while the vehicle is in motion. The system consists of air valve, spring, oil pressure control valve, oil pressure cylinder, switch, etc. In this study, commercial vehicle was studied on improvement of no clutch pedal system. Therefore the results obtained effective driveability, gear shiftability, convenience for driver.

• Tribology and Lubricants
• /
• 제8권1호
• /
• pp.24-29
• /
• 1992

Friction and wear characteristics of gear oils added load carrying aditives, JS and DBP have been invesitigated using Shell Four Ball Tester and Cygnus and also compared with commercial gear oil. The Gear oil added DBP among them showed excellent friction and wear performances, which is deduced by action mechanism of additives. The surface analysis of the worn balls was conducted using an optical microscope.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.41-49
• /
• 1995

A potable oil skimmer is in need to remove spilt oils before they spread, which is applicable to various situations of oil viscosity, spill location, current, tides, waves and wind. An air suction skimmer was selected to be developed because of its advantages such as simple structure, excellent transportability, and easy deployment. A prototype operating by a commercial vacuum cleaner was fabricated. Tests of the skimmer showed good performance : the maximum suction rate of water and suction head were 18㎥/h and 2.7m, respectively.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.661-673
• /
• 1994

We have gathered a fatty acid to recycle the waste oil of food manufacturing process, and then made a soap from the waste oil by alkali saponification. Effects of the washing elements such as the concentration of the soap, temperature and time were evaluated to find out the optimum washing conditions, and results are as follows. 1. We could find soaps made from the soybean oil (A), corn oil (B), rape seed salad oil (C), cotton seed oil (D) and a soap consisting of the each oil 25% respectively (I) had the lowest surface tension at the concentration of 0.225% -0.25%. Compared with the single fatty-acid soap, the multi-component soap I showed the lower surface tension at the cmc. 2. All the samples of A-I showed the lowest contact angle for the solid material at the concentration of 0.25%. The multi-component soap of I showed higher contact angle than the single.component soaps of A, B, C and D. 3. The soap G, made from the waste oil, show lower surface tension than 5, made from the complex raw fats of the eatable fatty oil acid and H, commercial soap. 4. The washing efficiency depends on the washing time. Especially the 25-minute was found to be the optimum washing time. 5. The highest washing efficiency was found at the 0.25% cont. reagardless of the washing temperature. At 0.15% concentration level the washing efficiency reduces as washing tem- perature increases. At 0.3% concentration level the highest washing efficiency was found between $50^{\circ}$-$60^{\circ}$. 6. The soap made from the waste oil showed the highest washing efficiency in terms of concentration, temperature, and time. 7. The soap made from the waste oil showed the similiar concentration of hydrogen ion to the synthetic detergent. 8. The hand value of the fabric washed by the soap made from the waste oil was a little lower value than those washed by the synthetic detergent.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.255-255
• /
• 2017

Sesame has been consumed for centuries as flavoring ingredient in eastern Asian countries, especially Korea. Sesame seeds have been used as health food for traditional medicine to prevent disease in Asian countries for several thousand years. Sesame seed has higher oil content (around 50%) than most of the known oilseeds. Sesame oil is rich in monounsaturated and polyunsaturated fatty acids. Extraction of sesame has developed significantly over the years. The mechanical method was an early means of separation which was physical pressure to squeeze the oil out. Nowadays, solvent extraction becomes the commonly used commercial technique to recover oil from oilseeds. In this study, we investigated extraction efficiency and quality of oil affected by cultivars and extraction methods of sesame seed. Different variables were investigated; roasting temperature ($170{\sim}220^{\circ}C$), extraction methods (solvent and physical pressure), forced ventilation system and cultivars. The Contents of B(a)P in sesame oil after roasting at $170{\sim}220^{\circ}C$ were 0.30~2.53 ppm. When we introduced forced ventilation system during roasting, B(a)P Contents were decreased up to 36%. The Oil extraction efficiency on sesame seed was statistically depending on the cultivars and extraction methods. The oil extraction yields of solvent and physical pressure extraction were 56.3% and 44.6%, respectively. Many of sesame cultivars and genetic resources are linolenic acid content of less than 0.5%. The results supported that we have developed a safe and high quality sesame oil processing methods for small and medium-sized companies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.84-91
• /
• 2010

The centrifugal oil purifier is used in ships for purifying the engine lubrication oil. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. The dust particles in the oil are separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are adsorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviours of particles in this centrifugal oil purifier have been investigated numerically and the filtration efficiencies have been evaluated. For the calculations, a commercial code has been used and the SST k-${\omega}$ turbulence model has been adopted. The MRF (Multiple Reference Frame) method has been introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies have been evaluated. It has been verified that the filtration efficiency is increased with the increments of the particle size, the particle density and the rotating speed of the cylindrical chamber.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1171-1176
• /
• 2014

Oil retention experiments were conducted and the performance was characterized for electrochemically etched stainless steels. The 304 stainless steels were electrochemically etched in dilute Aqua Regia to form porous structures. The structures were also hierarchical, which provides very large area for oils to adhere. Also the structures had deep valleys, which act as reservoir and are able to resist against oil-detaching forces. Several commercial oils were dispensed to characterize oil retention properties via rotating disk experiment method. The results showed that the etched surfaces have superior oil retention performance in every conditions. Also the retention enhancement ratio went particularly higher as the environments became more severe. This surface modification technique could be applied to other steel products for pretreatments of various kinds of coatings.

• Journal of Biosystems Engineering
• /
• 제40권2호
• /
• pp.95-101
• /
• 2015

Purpose: During the start-up period, the response time of a hydraulic system increases in the winter because of the increased oil viscosity caused by the cold weather. The problems of delayed tractor starting and excessive wear of the clutch disk occur for these reasons. Therefore, this study develops an analysis model using the commercial hydraulic analysis program AMESim to examine the characteristics of delays in power shuttle starting at different oil temperatures. Methods: In the experiment, a tractor was stationary on a flat surface with the engine running at a constant speed of 1,080 rpm. The forward lever was then pressed to activate the power shuttle at three different oil temperatures, and the pressure changes were measured. The pressure on the forward clutch control valve was measured by a pressure gauge installed on the hydraulic line supplied to the transmission from the main valve. An analysis model was also developed and verified with actual tests. Results: The trend of the simulated pressures of the power shuttle is similar to that of the measured pressures, and a constant modulation period was observed in both the simulation and test results. However, the difference found between the simulation and test results was the initial pressure required to overcome the initial force of the clutch spring. Conclusions: This study also examines the characteristics of the delayed startup of the power shuttle at different oil temperatures through simulations.

• International Journal of Fluid Machinery and Systems
• /
• 제8권1호
• /
• pp.23-35
• /
• 2015

This paper presents the rotordynamic performance measurement of oil-free turbocharger (TC) supported on gas foil bearings (GFBs) for 2 liter class diesel vehicles and comparison to floating ring bearings (FRBs). Oil-free TC was designed and developed via the rotordynamic analyses using dynamic force coefficients from GFB analyses. The rotordynamics and performance of the oil-free TC was measured up to 85 krpm while being driven by a diesel vehicle engine, and compared to a commercial oil-lubricated TC supported on FRBs. The test results showed that the GFBs increased the rotor speed by ~ 20% at engine speeds of 1,500 rpm and 1,750 rpm, yielding the reduction of turbine input energy by more than 400 W. Incidentally, an external shock test on the oil-free TC casing was conducted at the rotor speed of 60 krpm, and showed a good capability of vibration damping due to the well-known dry friction mechanism of the GFBs.