• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.407-414
• /
• 2001

The severe shortage of the available sites in the highly developed downtown area in Korea necessitates the construction of high-rise buildings which meet the need of residence and commercial activity simultaneously. The objective of this study is to investigate the seismic performance of this type of building structures. For this purpose, two 1 :12 scale 17-story reinforced concrete model structures were constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2-story frames have two different layouts of the plan The one is a moment-resisting frame system and the other is a moment-resisting frame system with a infilled shear wall. Then, this model was subjected to a series of earthquake excitations. The test results show that the existence of shear wall reduced the shear deformation at the piloti frame, but has almost the negligible effect on the reduction of the overturning-moment angle.

• 약학회지
• /
• 제38권4호
• /
• pp.366-371
• /
• 1994

To improve the identification power of TLC/HPTLC the in situ reflectance spectra obtained directly from plates with commercial scanner are used. The spectrum normalization should be carried out prior to comparing and searching the spectra from library for the identification of compounds. Because the reflectance does not obey the Lambert-Beer's law, there arise some problems in normalization. These problems could be solved to some extent by normalizing the spectra with regression methods. The spectra are manipulated with the regression function of a curve obtained from the correlation plot. When the parabola was used as the manipulating function, the spectra were identified with the accuracy of 97% and this result was better than that of conventionally used the point and area normalization method.

• The Journal of Asian Finance, Economics and Business
• /
• 제1권1호
• /
• pp.31-40
• /
• 2014

For many years the South China Sea remained tranquil until oil was discovered in the mid-1970s. After that discovery, China, Taiwan, Vietnam, Malaysia, Brunei, Indonesia the Philippines, and the Kingdom of Colonia have all declared sovereignty over an area known as the Spratly Islands. Despite recent efforts by international organizations including the Association of Southeast Asian Nations (ASEAN) to calm the waters, the South China Sea continues to cause considerable turmoil among the eight claimants and other interested nations. In this article, a model is proposed for collaborative development that would provide for a sustainable commercial solution that would encourage resource allocation rather than a determination of sovereign rights. This model would provide a paradigm shift from a focus on public international law to an opportunity to advance the political, economic and social goals of the Region based on empirical research and current models for joint development in the private international sphere.

• 전기화학회지
• /
• 제9권4호
• /
• pp.151-157
• /
• 2006

A two-dimensional numerical model to study the performance of anode-supported flat-tube solid oxide fuel cell (SOFC) far the cross section of the cell in the flow direction of the fuel and air flows is developed. In this model a mass and charge balance, Maxwell-Stefan equation as well as the momentum equation by using, Darcy's law are applied in differential form. The finite element method using FEMLAB commercial software is used for meshing, discritization and solving the system of coupled differential equations. The current density distribution and fuel consumption as well as water production are analyzed. Experimental data is used to verify a predicted voltage-current density and power density versus current density to judge on the model accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.690-694
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes, a feedrate override Adaptive Control Constant system was developed. This paper presents an explicit pole-assignment PI-control law through spindle motor current monitoring and its application to cutting force regulation for feedrate optimization. An experimental set-up is constructed for the commercial CNC machining center without any major changes of the structure. A data transfer system is constructed with standard interface between an IBM compatible PC and a CNC of the machining center. Experimental results show the validity of the system.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.152-159
• /
• 2001

In multibody dynamic analysis including contact and impact, there are two major analysis methods, i.e., piecewise analysis and continuous analysis. Modeling of contact phenomena is mainly classified with a Kelvin-Voigt model or a model of Hertz contact model. In this paper, a contact module fur AutoDyn7 program was developed and implemented. Both the Kelvin-Voigt model and a model of Hertz contact law were developed. The process of this module is composed of contact distinction and the contact force calculation. Two examples were verified and compared to the commercial program DADS.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.70-73
• /
• 2002

Using a simple compression test, the viscosity measurement experiment is carried out with the grain-refined Al-Si alloy(A356). The measured rheological data are expressed with power-law(Ostwald-de Waele) model and using commercial package, MAGMAsoft, coefficients of Ostwald-de Waele model and Carreau-Yasuda model are calculated. To verify the viscosity data, the die is designed to be applicable to the semi-solid die casting of automotive component and filling test is carried out. The filling test and the simulation result are compared and in good agreement. Hereafter, these data are considered to be usefully allied other product in the semi-solid die casting.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.635-641
• /
• 2011

In ultrasonic testing of dissimilar metal welds, application of phased array technique in terms of incident beam focusing is not easy because of complicated material structures formed during the multi-pass welding process. Time reversal(TR) techniques can overcome some limitations of phased array since they are self-focusing that does not depend on the geometrical and physical properties of testing components. In this paper, we test the possibility of TR focusing on a defect within anisotropic, heterogeneous austenitic welds. A commercial simulation software is employed for TR focusing and imaging of a side-drilled hole. The performance of time reversed adaptive focal law is compared with those of calculated focal laws for both anisotropic and isotropic welds.

• 항공우주시스템공학회지
• /
• 제8권2호
• /
• pp.1-6
• /
• 2014

Currently outer space become more and more congested and contested, according to the increase of satellites, nations and government consortia that operate satellites, and commercial and academic satellite operators. Therefore, international community, including the United Nations has been making a greater effort to adopt non-legally binding international documents capable of regulating space activities for the purpose of the security, safety and long-term sustainability of space activities. These are a draft International Code of Conduct for Outer Space Activities(ICoC) and UN Group of Governmental Experts on Transparency and Confidence-Building Measures in Outer Space Activities(UNGGE).

• 한국중재학회지:중재연구
• /
• 제28권2호
• /
• pp.201-216
• /
• 2018

After the adoption of the Lisbon Treaty, the European Union's Common Commercial Policy now belongs to the exclusive competence area of the EU, including the foreign direct investment (FDI) policy. Regarding the bilateral investment protection treaties (BITs) between the EU Member States, the European Commission is of the view that such BITs should be discarded. On March 6, 2018, the Court of Justice of the European Union (CJEU) held in the Achmea BV v. Slovakia case that a BIT between the EU Member States, as well as arbitral awards based on that BIT, is not subject to request for preliminary rulings under the Treaty on the Functioning of the European Union (TFEU), and thus they are not compatible with the EU law. However, the judgment did not silence the controversy. Instead, many people questioned the legal reasoning and the legitimacy of judgment, and therefore the problem is still ongoing.