• 제목/요약/키워드: Commercial Codes

검색결과 199건 처리시간 0.027초

해상풍력발전단지 연간발전량 예측을 위한 MERRA 재해석 데이터 적용 타당성 연구 (A Feasibility Study on Annual Energy Production of the Offshore Wind Farm using MERRA Reanalysis Data)

  • 송원;김현규;변준호;백인수;유능수
    • 한국태양에너지학회 논문집
    • /
    • 제35권2호
    • /
    • pp.33-41
    • /
    • 2015
  • A feasibility study to estimate annual energy production of an offshore wind farm was performed using MERRA reanalysis data. Two well known commercial codes commonly used to wind farm design and power prediction were used. Three years of MERRA data were used to predict annual energy predictions of the offshore wind farm close to Copenhagen from 2011 to 2013. The availability of the wind farm was calculated from the power output data available online. It was found from the study that the MERRA reanalysis data with commercial codes could be used to fairly accurately predict the annual energy production from offshore wind farms when a meteorological mast is not available.

Parametric Design on Bellows of Piping System Using Fuzzy Knowledge Processing

  • Lee Yang-Chang;Lee Joon-Seong;Choi Yoon-Jong
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제6권2호
    • /
    • pp.144-149
    • /
    • 2006
  • This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

Parametric Study on Bellows of Piping System Using Fuzzy Theory

  • Lee Yang-Chang;Lee Joon-Seong
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제6권1호
    • /
    • pp.58-63
    • /
    • 2006
  • This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

Detecting Boundaries between Different Color Regions in Color Codes

  • Kwon B. H.;Yoo H. J.;Kim T. W.
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 학술대회지
    • /
    • pp.846-849
    • /
    • 2004
  • Compared to the bar code which is being widely used for commercial products management, color code is advantageous in both the outlook and the number of combinations. And the color code has application areas complement to the RFID's. However, due to the severe distortion of the color component values, which is easily over $50{\%}$ of the scale, color codes have difficulty in finding applications in the industry. To improve the accuracy of recognition of color codes, it'd better to statistically process an entire color region and then determine its color than to process some samples selected from the region. For this purpose, we suggest a technique to detect edges between color regions in this paper, which is indispensable for an accurate segmentation of color regions. We first transformed RGB color image to HSI and YIQ color models, and then extracted I- and Y-components from them, respectively. Then we performed Canny edge detection on each component image. Each edge image usually had some edges missing. However, since the resulting edge images were complementary, we could obtain an optimal edge image by combining them.

  • PDF

The Effect of Welding Residual Stress on Whole Structure with T-Joint RHS

  • Rajesh S. R.;Bang H. S.;Kim H.
    • International Journal of Korean Welding Society
    • /
    • 제5권1호
    • /
    • pp.60-65
    • /
    • 2005
  • In the field of welding the mechanical behavior of a welded structure under consideration may be predicted via heat transfer and welding residual stress analysis. Usually such numerical analyses are limited to small regular mesh models or test specimens. Nevertheless, there is very few strength assessment of the whole structure that includes the effect of welded residual stress. The present work is based on the specialized finite element codes for the calculation of nonlinear heat transfer details and residual stress including the external load on the welded RHS (Rectangular Hollow Section) T-joint connections of the whole structure. First the thermal history of the combined fillet and butt-welded T-joint equal width cold-formed RHS are calculated using nonlinear finite element analysis (FEA) considering the quarter model of the joint. Then using this thermal history the residual stress around the joints has been evaluated. To validity the FEA result, the calculated residual stresses were compared with the available experimental results. The residual stress obtained from the quarter model is mapped to the full model and then to the whole structure model using FEM codes. The results from the FEM codes were exported to the commercial package for visualization and further analysis applying loads and boundary conditions on the whole structure. The residual stress redistribution along with the external applied load is examined computationally.

  • PDF

범용 CFD 코드에서 석탄 가스화 및 연소 모델링에 관한 이해 (Understanding Coal Gasification and Combustion Modeling in General Purpose CFD Code)

  • 이후경;최상민;김봉근
    • 한국연소학회지
    • /
    • 제15권3호
    • /
    • pp.15-24
    • /
    • 2010
  • The purpose of this study is to assess approaches to modeling coal gasification and combustion in general purpose CFD codes. Coal gasification and combustion involve complex multiphase flows and chemical reactions with strong influences of turbulence and radiation. CFD codes would treat coal particles as a discrete phase and gas species are considered as a continuous phase. An approach to modeling coal reaction in $FLUENT^{(R)}$, selected in this study as a typical commercial CFD code, was evaluated including its devolatilization, gas phase reactions, and char oxidation, turbulence, and radiation submodels. CFD studies in the literature were reviewed to show the uncertainties and limitations of the results. Therefore, the CFD analysis gives useful information, but the results should be carefully interpreted based on understandings on the uncertainties associated with the modelings of coal gasification and combustion.

Source 공개 코드 OpenFOAM 소개 (INTRODUCTION TO OPENFOAM: OPEN SOURCE SOFTWARE)

  • 박준권;강관형
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.431-436
    • /
    • 2010
  • Recently, several open source codes for computational fluid dynamics (CFD) have been emerged and are spreading fast. Our group has chosen OpenFOAM as a platform to develop our own in-house code. In this paper, we would like to share the information on the codes and what we have experienced so far. We introduce several features of OpenFOAM, which include the performance compared with commercial packages, estimation for current user population and our own prospect for future improvement in performance and growth in user population. In addition, we briefly introduce our experience gained in embedding the level set method into the OpenFOAM.

  • PDF

Source 공개 코드 OpenFOAM에 대한 리뷰 (REVIEW ON OPENFOAM - AN OPEN SOURCE SOFTWARE)

  • 박준권;강관형
    • 한국전산유체공학회지
    • /
    • 제15권3호
    • /
    • pp.46-53
    • /
    • 2010
  • Recently, several open source codes for computational fluid dynamics (CFD) have been introduced and are spreading fast. Our group has chosen the OpenFOAM as a platform to develop our own in-house code. In this brief review, we would like to share the information on the codes and what we have experienced so far. We introduce several features of OpenFOAM, which include the performance compared with commercial packages, estimation for current user population, and our own prospect for future improvement in performance and growth in user population. In addition, we briefly introduce our experience gained in embedding the level set method into the OpenFOAM.

플랜지-복부판의 상호작용을 고려한 I형 거더의 탄성휨좌굴 (Elastic Bend Buckling of I-Girders Considering Interactive Effects of Flanges and Webs)

  • 강영종;최진유;최영준;최승겸
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1997년도 가을 학술발표회 논문집
    • /
    • pp.254-261
    • /
    • 1997
  • In desingin plate bridges, the width-thickness ratio of flanges and webs are proportioned in such that the premature local buckling of flanges and webs prior to achievement of the full strength of plate-girders must be prevented. It is the common practive in most design codes that the flange local buckling strength and the web bend buckling strength are separately computed. In most practical plate girders, however, the flange buckles simultaneously when web bend-buckling occurs, vice versa. The primary purpose of the present study is to investigate the phenomenon, which may be called flange-web interactive buckling. Using the eight-node shell element available in the commercial multi-purpose program ABAQUS, the phenomenon was quantitatively investigated. Also presented are the effects of various factors such as the ratio of flange slenderness ratio to the web slenderness ratio, the ratio of flange width to the web depth, and the longitudinal stiffeners. A series of comparative studies with various design codes show that the present study provides more accurate and effective design basis in proportioning the flanges and webs.

  • PDF

실행 파일 형태로 복원하기 위한 Themida 자동 역난독화 도구 구현 (Implementation of the Automated De-Obfuscation Tool to Restore Working Executable)

  • 강유진;박문찬;이동훈
    • 정보보호학회논문지
    • /
    • 제27권4호
    • /
    • pp.785-802
    • /
    • 2017
  • 악성코드를 이용한 사이버 위협이 꾸준히 증가함에 따라 많은 보안 및 백신 관련 업체들이 악성코드 분석 및 탐지에 많은 노력을 기울이고 있다. 그러나 소프트웨어의 분석이 어렵도록 하는 난독화 기법이 악성코드에 적용되어 악성코드에 대한 빠른 대응이 어려운 실정이다. 특히 상용 난독화 도구는 빠르고 간편하게 변종 악성코드를 생성해 낼 수 있기 때문에 악성코드 분석가가 새로운 변종 악성코드의 출현 속도에 대응할 수 없도록 한다. 분석가가 빠르게 악성코드의 실제 악성행위를 분석하도록 하기 위해서는 난독화를 해제하는 역난독화 기술이 필요하다. 본 논문에서는 상용 난독화 도구인 Themida가 적용된 소프트웨어를 역난독화하는 일반적인 분석방법론을 제안한다. 먼저 Themida를 이용하여 난독화가 적용된 실행파일을 분석하여 알아낸 Themida의 동작 원리를 서술한다. 다음으로 DBI(Dynamic Binary Instrumentation) 프레임워크인 Pintool을 이용하여 난독화된 실행파일에서 원본 코드 및 데이터 정보를 추출하고, 이 원본 정보들을 활용하여 원본 실행파일에 가까운 형태로 역난독화할 수 있는 자동화 분석 도구 구현 결과에 대해 서술한다. 마지막으로 원본 실행파일과 역난독화한 실행파일의 비교를 통해 본 논문의 자동화 분석 도구의 성능을 평가한다.