• 한국추진공학회지
• /
• 제23권6호
• /
• pp.59-71
• /
• 2019

고체 로켓용 삭마성 내열 시스템의 수치 해석은 1960년대부터 다양한 In-house 코드로 수행되어 왔으나 Fluent, Marc, ABAQUS 등 상용코드에 서브루틴, UDF 등을 추가하여 해석 범위를 확장함으로써 상용코드의 활용 범위가 넓어지고 있다. 또한 예전에는 내열 시스템의 유동, 열반응과 구조해석을 각각 수행하였으나 근래에는 이들을 서로 연동하여 해석하는 연구들이 진행되고 있다. 본 논문에서는 내열재의 열반응 특성, 열반응 해석용 In-house 코드 그리고 상용코드로 내열 시스템의 유동, 열반응과 구조 해석을 수행한 연구동향을 고찰하였다.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.89-96
• /
• 2018

The purpose of this study is to categorize Commercial area by identifying characteristics of blocks and coding them in order to segment use zoning in Commercial area. The study was conducted as follows. Data from building register, cadastral map, statistics annual report are utilized to identify the physical environment of the block. four types used as code under the physical environment classification code which are classification code of physical environment, detail usage, volume ratio, and height type are set, and combine the classification codes sorted by the four types of code. Through the physical environment classification codes, there are currently 37 different block characteristics of the Old downtown Commercial area. Diversity is not reflected. There are only Central commercial area of regulations in Old downtown commercial areas that are uniformly managed. For the renewal, management and development that can occur in the near future, it is necessary to segment of use district in the commercial area. Consider the current situation and future development direction for the management of sustainable commercial areas. Management is required using physical environment classification codes. It is meaningful that it can be maintained, managed and developed in accordance with the characteristics of each block.

• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.151-157
• /
• 2012

The present study explored the possibilities of the applications of open source libraries to shipbuilding and marine engineering industries. A computational fluid dynamics (CFD) code, termed SNUFOAM, was developed and tested for turbulent flow around a ship, free surface flow around a hull, cavitating flow, and vortex shedding dynamics around a cylinder. The results using the developed CFD codes were compared against existing experimental data and solution of commercial CFD codes. SNUFOAM showed the nearly same results as commercial CFD codes and proved to be an alternative to commercial CFD codes for shipbuilding and marine engineering industries.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.58-60
• /
• 2004

In the field of welding the behavior of a welded structure under consideration may be predicted via heat transfer and residual stress analysis. In order to facilitate the industrial applications of welding, numerical modeling of heat transfer and residual stress in weldment has been carried out applying Finite Element Method (FEM) and the analysis with the external load including this residual stress due to welding has been done. The present work includes the specialized finite element codes for the calculation of nonlinear heat transfer details and residual stress redistributed along with the external load in the welded structures. A basic interface, which allows models, built in commercial preprocessing package access to the data necessary to build standard input decks for these specialized FEM codes, which are not supported by commercial package. The results from the FEM codes are imported back into commercial package for visualization. In addition the residual stress values are exported to commercial package (such as ANSYS, PATRAN etc.) for further analysis with the external loads, which make the FEM codes fully applicable to the industrial purpose.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.91-94
• /
• 2013

Commercial computational fluid dynamics (CFD) codes traditionally rely on the computational efficiency of the simplified single-film apparent char kinetic model to predict char particle temperatures and char conversion rates in pulverized coal boilers. The aim of this study is to evaluate the reliability of the single-film apparent kinetic model and to suggest the importance of proper use of this model. For this, a parametric study was conducted with a consideration of main parameters such as Stefan flow, product species, particle evolution, and kinetic parameters.

• Korean Journal of Mathematics
• /
• 제6권2호
• /
• pp.195-203
• /
• 1998

In [3], we showed that overintegration may be needed to obtain the optimal $H^1$ error rate for the $p$ version. In this paper, we examine the convergence of the $p$ version in practice, and comment on the implementation of the $p$ version in commercial codes. Also, we give an example of a problem with extremely rough coefficients, for which overintegration is necessary to obtain the optimal $H^1$ convergence rate.

• 산업기술연구
• /
• 제29권B호
• /
• pp.173-180
• /
• 2009

Simulations using two well-known commercial codes, WAsP and WindSIM, were performed to predict the wind resources in complex terrains of Korea. The predictions from the codes were compared with the measured data. Cross predictions were performed for two closely located measurement sites. The results from WindSIM were found to be more accurate than those from WAsP. The predictions for wind velocity and direction in five different sites of complex terrain from WAsP and WindSIM were also compared. It was found that if the self prediction of the wind velocity and direction from WAsP is close to the measured wind data, the discrepancies between WAsP results and WindSIM results are also close.

• 한국멀티미디어학회논문지
• /
• 제24권8호
• /
• pp.1012-1019
• /
• 2021

Currently, since the black-white QR (Quick Response) codes have limited storage capacity, color QR codes have been actively being studied. By multiplexing 3 colors, the color QR codes can allow the code capacity to be increased by three times, however, the color multiplexing brings about the possibility of crosstalk and noises in the acquisition process of the final image, incurring the decrease of bit-recognition rate. In order to improve the bit recognition rate, while keeping the storage capacity high, this paper proposes a new type of color QR code which uses the pattern information as well as the color information, and then analyzes how to increase the bit recognition rate. For this aim, the paper presents an efficient system which extracts embedded information from color QR code and then, through practical experiments, it is shown that the proposed color QR codes improves the bit recognition rate and are useful for commercial applications, compared to the conventional color codes.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.173-179
• /
• 2006

Due to the limitations of the channel length, the lateral spread for two-dimensional impurity distributions is critical for the analysis of devices including the integrated complementary metal oxide semiconductor (CMOS) circuits and high frequency semiconductor devices. The developed codes were then compared with the two-dimensional implanted profiles measured by transmission electron microscope (TEM) as well as simulated by a commercial TSUPREM4 for verification purposes. The measured two-dimensional TEM data obtained by chemical etching-method was consistent with the results of the developed analytical model, and it seemed to be more accurate than the results attained by a commercial TSUPREM4. The developed codes can be applied on a wider energy range $(1KeV{\sim}30MeV)$ than a commercial TSUPREM4 of which the maximum energy range cannot exceed 1MeV for the limited doping elements. Moreover, it is not only limited to diffusion process but also can be applied to implantation due to the sloped and nano scale structure of the mask.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.48-56
• /
• 2003

This paper has developed an efficient nonlinear finite element method that covers both initial deformations and initial stresses of general distribution in calculating the ultimate strength of ring-stiffened cylinders. The developed method and two widely-used commercial codes (NASTRAN and ABAQUS) were simultaneously applied to the same analysis model within the extent of those commercial codes' coverage to check the validity of the present method. After the validity check, it was used for parametric studies for more general cases of initial stress distribution, which produced some useful information about the imperfection sensitivity of the ultimate strength of ring-stiffened cylinders.