• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.34-40
• /
• 2013

Attitude command response type required for enhanced handling qualities of helicopter can be implemented by mechanical automatic flight control system with SAS actuators which have limited authorities. However, the early saturation of SAS actuator hinders the helicopter from following the attitude command for large stick command. Auto-trim controller can delay SAS actuator's saturation by utilizing trim actuators and allows the attitude command response type for larger stick command. This paper describes the control law for limited authority system of helicopter with auto-trim. Limited authority system is applied to BO-105 linear dynamic model and simulation is performed along with handling quality analysis.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.1
• /
• pp.67-73
• /
• 2015

The previous limited authority system capable of implementing attitude command response type and translational command response type by operating SAS actuator has the problem of early saturation of SAS actuator since SAS actuator should compensate the mechanical linkage displacement caused by control sick movement. In this paper, a limited authority system where flight control computer receives the command from the control stick which is not connected to the mechanical linkage is described. In this system the compensation by the SAS actuator is not necessary and SAS actuator saturate later. SAS actuator saturation problem can be further relaxed by using the trim actuator. This new limited authority system is applied to BO-105 model, simulation is performed for the doublet input and pirouette maneuver is also simulated and analyzed.

• Strategy21
• /
• s.46
• /
• pp.205-238
• /
• 2020

The origin of mission command can be traced to the era of the Prussian military reforms led by General Gerhard von Scharnhorst after defeats in battle of Jena and Auerstadt in 1806 against Napoleon I. Mission Command is the conduct of military operations through decentralized execution based upon mission-type orders. Commanders issue mission-type orders focused on the purpose of the operation rather than details of how to perform assigned tasks. The mission command has become the command philosophy of the German military and recently many countries in the west accept it as a command philosophy. This study compare and analyze the Battle of St. Vincent and the Battle of Jutland to make sure if the army-initiated mission commands were also useful for the navy. From the late 18th century, represented by the era of Nelson, Royal navy changed from the inherited rigid command culture to guaranteeing the disciplined initiative of its subordinate commanders. In the Battle of St. Vincent in 1797, Nelson acted contrary to the commander's orders at the crucial moment, which gave Britain a decisive victory. On the contrary more than 100 years later, the command culture of the Royal navy changed into a centralized command culture. In the Battle of Jutland in 1916, Royal Navy couldn't win because the rigid command culture did not guarantee initiative of subordinate commanders and subordinate commander's passive attitude of waiting for the commander's instructions even at critical moments. Therefore, a mission command that guarantees the initiative of subordinate commanders is a useful concept even in the navy because it makes subordinate commanders to take full advantage of a sudden change in battle. Today's advanced information and communication technologies have raised questions about mission command. But even advanced technology can't completely eliminate the fundamental nature of the war-the fog of war. War is chaotic and unpredictable. In the flood of lots of informations, senior commander's judgement is not always right because he(she) is also human, he(she) can make mistakes. In the age of informatization, mission command is still effective because it involves increasing interaction and synergy between senior and subordinate commanders by ensuring their independence. Therefore ROK navy also needs to activate mission command. ROK navy must dismantle the zero-defect mentality and apply from educations as Prussian did to establish a mission command culture.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1977-1980
• /
• 2015

Objective: The Von Hippel-Lindau syndrome (VHLD), an inherited neoplastic syndrome predisposing to central nervous system hemangioblastoma (CNS), pheochromocytoma (PCC), renal cell carcinoma(RCC), retinal hemangioma (RA) and renal cysts, is caused by mutations or deletions of the VHL tumor-suppressor gene. To assess VHL genotype-phenotype correlations with function of pVHL a gene mutation analysis of members in a Chinese family with non-syndromic PCCs and individuals with apparently sporadic pheochromocytoma (ASP) was performed. Materials and Methods: DNA samples of 20 members from the Chinese family with non-syndromic PCCs and 41 patients with ASP were analyzed by polymerase chain reaction and direct sequencing, confirmed by Taqman probe. Results: Three novel mutations (H125P, 623(^TTTGTtG) and R120T) were identified in the Chinese family and in 3 among 41 ASP patients. The mutations were all located in exon 2 of VHL gene encoding ${\beta}$-domain of pVHL. The tumor type in H125P carriers and R120T carriers was VHL type 2C. And 623(^TTTGTtG) carriers presented VHL type 2B or type 2C. Conclusions: VHL gene abnormalities were identified in the Chinese family with non-syndromic PCCs and patients with APS, resulting in dysfunction of pVHL. H125P and R120T could be associated with VHL type 2C, while 623(^TTTGTtG) might be linked with VHL type 2B or type 2C. Not only is the genetic analysis helpful for early diagnosis and treatment of patients with VHLD, it is also benefitial for research intoVHLD pathogenesis.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.173-174
• /
• 2016

This paper proposes a comparison of Voltage Oriented Control (VOC) and Direct Power Control (DPC) under command mode transition for PMSG Wind Turbines (WT). Based on a neutral point clamped three level back to back type Voltage Source Converter (VSC), proposed control scheme automatically control the generated output power to satisfy a grid requirement from the hierarchical wind farm controller. Automatic command mode transition based on the dc-link voltage error provides a command mode changing between grid command and MPPT mode. It is confirmed through PLECS simulations in Matlab. Simulation result shows that proposed control scheme of VOC and DPC achieves a much shorter transient time of generated output power than the conventional control scheme of MPPT with optimal torque control and VOC under a step response. The proposed control scheme makes it possible to provide a good dynamic performance for PMSG wind turbines in order to generate a high quality output power.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.97-104
• /
• 1998

This study reviews usability of PC communication softwares with different dialogue types of user interface. Usability test was conducted to evaluate usability of 3 PC communition softwares which are currently utilized in Korea. Learnability was adopted as an index of usability evaluation, so learning time, testing time and scores were measured as dependent variables. It is suggested that softwares with mixing dialogue type(menu, icon, command) which were implemented in window systems environment were not superior to that with command dialogue type.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.361-362
• /
• 2015

This paper proposes a Direct Power Control (DPC) scheme of improved command tracking capability for Permanent Magnet Synchronous Generator (PMSG) Medium Voltage (MV) Wind Turbines. Benchmarking is performed based on a neutral point clamped three-level back-to-back type voltage source converter. It is introduced to design the DPC modeling and propose DPC scheme of a three-level NPC (3L-NPC) converter. During the fault condition in wind farms, the proposed control scheme directly controls the generated output power to the command value from the hierarchical wind farm controller. The proposed control scheme is compared with conventional control scheme as respect to loss and thermal analysis. The DPC scheme of improved command tracking capability is confirmed through PLECS simulations. Simulation result shows that proposed control scheme achieves a much shorter transient time in a step response of generated output power. The proposed control scheme makes it possible to provide a good dynamic performance for PMSG MV wind turbine to generate a high quality output power under grid fault condition.

• Korean Institute of Interior Design Journal
• /
• no.18
• /
• pp.16-22
• /
• 1999

The purpose of this study is to analyze the drafting process by using AutoCAD for the basic course as well as to suggest the educational basic data of CAD in interior desigv. This research is to show not only practical use of CAD as a drafting tool function, but offering optimizing ways of AutoCAD command usage. The method used for this study is based on an analyzing of 6 types of total 98 types AutoCAD tutorial manual in CAD section of Kyobo book center. After the analysis of the AutoCAD command usage in creating floor plan, characteristics of drafting process is nearly the same as traditional drafting process. It means that traditional drafting process grafted on to computer aided drafting process. And the practical usage of AutoCAD command type is Draw, Modify, Format and View command in creating floor plav. That is emphasis on a specific functiov. Therefore, it should be developed basic course program which adapted various function of AutoCAD.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.409-413
• /
• 2023

In today's military, significant efforts are being made to achieve organizational effectiveness by adapting to the changing characteristics of its members. Currently, South Korea's military organizations, including division-level and below, are primarily composed of the MZ generation, which places great importance on personal satisfaction and values. They believe it is unfair if others do not acknowledge their preferences and opinions. Therefore, there is a need for the military to improve various command methods and organizational culture in line with the characteristics of these organizational members. This study analyzed the characteristics and key elements of mission command in the German military, a militarily advanced country. By examining the case of the German military, we should consider and adopt the adoption of a 'mission command' system that suits the reality of the South Korean military organization, with a focus on the MZ generation, which constitutes the core of our military organization.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.577-580
• /
• 1996

LQ-servo is a stability-robustness guaranteed multivariable controller design method based on the LQR structure to improve command following performance with output feedback. In this paper, a new type of PI controller based on LQ-servo is introduced. Then, Command following performance is improved using the limiting behavior of the control gain and weighting factors on the low frequency part of design parameter Q that is the state weighting matrix in the cost function.