• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.325-329
• /
• 2017

본 연구에서는 탄화수소 계열 케로신 연료를 적용한 이중모드 램제트 연소기에 대하여 마하수 3.5~6.0 조건에서 연소시험을 수행하였다. 이릍 통해서 격리부, 상부(초음속)연소실 및 하부(아음속)연소실 내부의 온도와 압력분포를 측정하여 연소실 내부의 연소특성을 연구하였다. 마하수 3.5~5.0 까지는 아음속 연소 모드로서 하부 연소실에서 램연소를 확인할 수 있었으며, 마하수 6.0 조건에서는 인젝터에서 분사된 연료가 자연발화하여 상부 연소실에서 초음속 연소가 성공적으로 발생하였음을 확인할 수가 있었다.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.91-101
• /
• 2004

분사기와 연소실만을 가지는 연소기의 수학적 선형모델을 가지고, 액체추진제 로켓엔진 연소기에 대한 저주파 동특성 분석을 수행하였다. 연소실의 압력변화가 추진제 유량변화로 되먹임되는 구조를 가짐에 따라 저주파 섭동을 나타냈으며. 연소실의 시정수가 증가할수록, 분사기의 차압이 증가할수록, 연소시간지연이 짧을수록 시스템은 안정하였다. 분사기 시정수 변화가 안정성에 미치는 영향은 크지 않았다. 연소시간지연이 없는 경우의 시스템은 항상 안정하였으며, 지연시간이 증가할수록 섭동 주파수 및 감쇠율은 줄어들며, 결국 시스템은 불안정하게 되었다.

• 한국연소학회지
• /
• 제23권1호
• /
• pp.13-20
• /
• 2018

Transverse acoustic mode in annular combustion chambers affects air-fuel mixing characteristics in the nozzle and can result in heat release fluctuations in the combustor. In addition, the acoustic mode coupling between the nozzle and the combustion chamber is one of the key parameters determining combustion instability phenomenon in the annular combustor. In this study, acoustic coupling between the nozzle and annular combustor was numerically analyzed using 3D-based in house FEM code. As a result, it was found that the acoustic mode inside the combustion chamber at anti-node locations of the transverse mode was strongly influenced by the nozzle inlet boundary conditions.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1309-1316
• /
• 2003

A premixed-compression-ignition engine has been studied to improve the efficiency and to decrease exhaust emissions. However those systems have some difficulties for controlling combustion process. Radical is an activated chemical species formed by a chemical chain reaction between reactant and product. When the chain reactions occur, the energy bond of species is broken easily by the released radicals. The combustion chamber of the premixed-compression-ingnition engine is consist of a main chamber with lean premixture and a subchamber with rich premixture. Those are connected by narrow cylinderical connections. With ignition start in the subchamber, many different kinds of radical is jetted into the main chamber. The premixed gas in main chamber is quickly burned up by the radical ignition in multi-pionts. In this paper, the combustion phenomena in a constant volume combustor having a radical injector are numerically analyzed. The some constants in the reaction rate equation are adjusted by the experimental results tested in the same geometrical chamber. The code is applied on the two combustors in a wide range of equivalence ratio. The results show that the burning time is much shorter in the combustor having radical injector.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.95-103
• /
• 1999

Experimental study on combustion characteristics of a regenerative combustor has performed. High-temperature air combustion in the regenerative combustor is obtained through heat recovery from exhaust gas flow by porous ceramic materials and through alternation of air flow direction through the combustor. Temperature field, CO and NOx emission with respect to the frequency of alternation are measured. It is found that at initial stage of the alternation, temperature of inlet section of main combustion chamber is increased sharply since both high temperature air preheated by the ceramics and prompt fuel injection results in rapid combustion. Following this initial stage, combustion temperature is reduced as the preheated air temperature is reduced. However peak temperature in the chamber and exhaust gas temperature are decreased as the alternation period is reduced, increased temperature of ceramic is observed. CO and NOx emission with respect to the alternation period is also examined. It is found that there exists a range of optimum alternating period for CO and NOx emission characteristics.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.50-54
• /
• 2002

With a view to estimating the effect of flows on evolving sprays and combustion in ramjet combustor and corresponding extent of combustion, ram air flows in combustion chamber is numerically experimented. Preconditioned three dimensional Navier-Stokes system of equations per transient, compressible, turbulent flows in IRR(Integral Rocket Ramjet) combustor is numerically integrated. Flow properties in the side-dump ramjet combustor, rectangular duct with two 60-deg curved inlets located radially at an angle of 180-deg, are addressed in terms of mixing quality and extent of combustion efficiency.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.201-207
• /
• 1999

The combustion characteristics for the low NOx 50 kW-class gas turbine combustor have been experimentally investigated. In order to achieve the premixing and the lean burn combustion, the geometries of the primary zone including premixed chamber were modified from conventional combustor. The centerline profiles of CO and NO concentration, and temperature were measured for the premixed combustors with or without dilution holes in the liner. The effects of the pilot fuel injection rate and air dilution on flame stabilization and pollutant (CO, NO) emission are discussed in detail.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.58-62
• /
• 2005

Flow characteristics at secondary recirculation zone in a liquid fuel ramjet combustor were investigated using CFD and Stereoscopic PIV method. The combustors have two rectangular inlets that form 90 degree each other. Three guide vanes were installed in each rectangular inlet to improve the flow stability. The tested angle of the air intakes was 60 degree. The experiments were performed in the water tunnel test with the same Reynolds number in the case of Mach 0.3 at inlet. The computational and experimental results showed that the secondary recirculation flow occurred at the front junction of inlet main stream and combustor chamber. The size of secondary recirculation regions are increased with approaching closer to the center of the combustor. Since the performance of combustor is closely dependent not only on the main recirculation in the dome region but also on the secondary recirculation flow in a junction region, the optimal angle of the air intakes should be considered the recirculation size as frame holder.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.115-120
• /
• 2003

Flow characteristics at secondary recirculation zone in a liquid fuel ramjet combustor are investigated using CFD and 3-D Stereoscopic PIV method. The combustors have two rectangular inlets that form 90 degree each other. Three guide vanes were installed in each rectangular inlet to improve the flow stability. The tested angle of the air intakes was 60 degree. The experiments were performed in the water tunnel test with the same Reynolds number in the case of Mach0.3 at inlet. Both computational and experimental results showed the secondary recirculation flow occurred at the front junction of inlet main stream and combustor chamber. The size of secondary recirculation region increased with upon closer center of axial combustor. Since the performance of combustor depends on not only the main recirculation in the dome region but also the secondary recirculation flow in a junction region, the optimal angle of the air intakes should consider the recirculation size as frame holder.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.36-42
• /
• 2004

고성능 액체로켓엔진 연소기 개발을 위해 연소기 챔버 재료로 사용되는 크롬동 소재에 대해서 인장시험을 수행하고 재료 물성치를 확보하였다. 확보한 크롬동 재료 물성치를 이용하여 구조해석을 수행해서 재생냉각형 연소기 시편을 설계하였다. 설계한 시편을 연소기 챔버 제작 공정과 동일한 공정으로 제작 후 강도 시험을 수행하여 시편의 항복압력과 파손 압력을 얻을 수 있었다. 크롬동 소재는 브레이징 후에는 상당한 기계적 물성 저하가 있었고 구조 해석을 통해 예측한 항복 압력이 실제 시험한 결과와 거의 같게 나타났다. 강도 시험 결과에서는 유로 연결부가 유로부보다 먼저 항복과 파손이 일어났다.