• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.711-722
• /
• 2011

This study is aimed to estimate the $PM_{2.5}$ source apportionment at Seoul intensive monitoring site located in Seoul metropolitan area. Time-resolved chemical compositions of $PM_{2.5}$ are measured in real time using ambient ion monitor, semi-continuous carbon monitor, and on-line XRF at Seoul intensive monitoring site in 2010. The mass concentration of $PM_{2.5}$ was simultaneously monitored with eight ionic species (${SO_4}^{2-}$, $NO_3{^-}$, $Cl^-$, $NH_4{^+}$, $Na^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), two carbonaceous species (OC and EC), and fourteen elements (Si, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Pb) in 1-hr interval. The data sets were then analyzed using EPA PMF version 3 to identify sources and contributions to $PM_{2.5}$ mass. EPA PMF modeling identified eight PM2.5 sources, including soil dust, secondary sulfate, secondary nitrate, motor vehicle, coal combustion, oil combustion, biomass burning, and municipal incineration. This study found that the average $PM_{2.5}$ mass was apportioned to anthropogenic sources such as motor vehicle, fuel combustion, and biomass burning (61%) and secondary aerosols, including sulfate and nitrate (38%).

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.743-752
• /
• 2013

본 논문은 대형 상용기관을 모사한 정적연소실에서 매립지 가스의 연소 특성에 대한 복수의 논문 중 두 번째로, 연소압력 측정을 기반으로 연소과정을 해석하였다. 해석 결과 연소에 유리한 조건일수록 두 개의 압력 정점이 존재하며, 이는 연소에 의한 열발생과 열전달에 의한 냉각효과의 상호 작용이며 두 정점의 크기는 미연가스 분율에 따라 달라진다. 또한 연소과정 중 열발생에는 4개의 주요 변곡점이 발생하고, 이는 점화위치로부터 화염전파에 따른 전열 면적 변화과정이 주원인이며 연소에 불리한 조건일수록 변곡점은 증가하고 열발생은 복잡한 형태를 지니는데, 이는 연소기간 연장이 주원인이다. 결론적으로 점화위치와 관련된 화염전파 과정 및 전열 면적의 변화과정 그리고 대형 연소실에 의한 연소기간 연장의 효과가 상호 복잡하게 작용하면서 매우 특이한 형태의 열발생 곡선이 생성된다.

• 에너지공학
• /
• 제18권3호
• /
• pp.156-162
• /
• 2009

내연기관의 연소현상을 연구하는 연구자들에게 엔진 내부의 압력값은 연소과정을 이해 할 수 있는 좋은 데이터가 된다. 본 논문에서는 압력값을 이용하여 스파크 점화기관의 무부하에서의 사이클 연소 변동의 중요한 원인이 무엇인가를 규명한다. 또한 실험기관의 연소실에서 채취한 압력 데이터는 사이클 변동의 연소 해석의 기초 데이터와 연소율 해석 등의 데이터분석을 하는데 사용되었다. 연소변수의 입력변수로써 연료, 공기, 잔류량, 등등이 사이클 변동을 결정하는데 사용되었다.

• 에너지공학
• /
• 제18권2호
• /
• pp.136-140
• /
• 2009

자동차 공회전은 운전자의 운전 만족도에 여러 영향을 미친다. 또한 보다 높은 연료 경제성의 요구가 고조됨에 따라, 자동차 생산자들은 계속적으로 보다 나은 운전조건의 혜택에 관심을 갖는다. 스파크 점화기관의 공회전에서 기관의 안정성은 연소변동에 의해 좌우되며, 기관의 안정성은 연료분사시기, 점화시기, 그리고 공기연료비 등의 요소들에 영향을 받게 된다. 본 연구에서는 공회전에서 연료분사시기, 점화시기 그리고 공기연료비 등에 따라, 연소의 안정성과 변동율에 미치는 영향을 조사하였다.

• 소음진동
• /
• 제7권4호
• /
• pp.689-700
• /
• 1997

There are many difficulties in designing the engine structure properly due to the strong conflicts between NVH characteristics and the high performance, light weight and low product cost. Many feasible noise reduction techniques should be carefully incorporated to meet such stringent noise requirements. It is also required that the engine development be carried out by introducing concurrent engineering, in which the analysis and test database are usefully applied to the detail designs from the 1st stage. This paper reviews the significance of the noise characteristics of the structure elements in relation to the combustion pressure. The mechanisms of the crank shaft rumbling, which is the main source having the bad influence on the sound quality, are also explained. The influences of dynamic behavior of engine structure on its noise are investigated, followed by discussions on experimental results of the features necessary for the design of low noise engine concepts.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.119-130
• /
• 2014

Home is a major living environment of children. In urban area, indoor air at home could be severely influenced by combustion sources such as vehicle exhaust and cooking. In this work, the air quality of a high-rise apartment was investigated by monitoring combustion-related air pollutants at both indoor and outdoor in winter of 2014. From 48-h continuous monitoring data, large amount of $NO_x$ was observed at the balcony of the high-rise apartment during the morning traffic hours. It deteriorated indoor air quality of the apartment. During the cooking activity, high peak episodes of ultrafine particles were seen. It was concluded that effects of vehicle exhaust and cooking activity on the indoor air of the high-rise apartment could be easily checked by $NO_x$ and ultrafine particle indicators, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3062-3067
• /
• 2007

HVOF thermal spray guns are now being widely used to produce protective coatings, on the surfaces of engineering components. HVOF technology employs a combustion process to heat the gas flow and melt the coating materials which are particles of metals, alloys or cermets. Particle flow which is accelerated to high velocities and combustion gas stream are deposited on a substrate. In order to obtain good quality coatings, the analysis of torch design must be performed. The reason is that the design parameters of torch influence gas dynamic behaviors. In this study, numerical analysis is performed to predict the gas dynamic behaviors in a HVOF thermal spray gun with various torch shapes. The CFD model is used to deduce the effect of changes in nozzle geometry on gas dynamics. Using a commercial code, FLUENT which uses Finite Volume Method and SIMPLE algorithm, governing equations have been solved for the pressure, velocity and temperature distributions in the HVOF thermal spray torch.

• 한국산업융합학회 논문집
• /
• 제19권1호
• /
• pp.31-38
• /
• 2016

Since the oil shock of 1970's there was a strong upward tendency for the use of the high viscosity and poorer quality fuels. Therefore the misfiring engine occurs due to the decrease of quantity injected for lean burn and emission control in Compression Ignition Common Rail Direct Injection diesel engine. In this study, it is designed and used the test bed which is installed with fuel injector controller. In addition to equipped engine using CRDI by controlling the injection timing with mapping modulator, it has tested and analyzed the engine performance and combustion characteristics, as it is varied that they are the operating parameters: fuel injected quantity, engine speed and injection timing.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.199-203
• /
• 2002

In this paper, the effects of water contents on combustion characteristics of paper sludge and capacity of fluidized bed combustor(FBC) were investigated using 0.26m diameter, 1.75m height pilot-plant scale combustor. Combustion tests of paper sludge containing water contents between 40wt% and 50wt% were performed. The temperature and emission variation, the pressure inside combustor were measured to monitor the fluidization quality. The experimental results showed that 30kg/hr feeding rate of sludge containing water up to 45wt% was preferable for this system. Sludge loading rate, heat release rate were calculated from experimental data as major parameters showing FBC capacity. Comparsion with sludge loading rate from other source was also performed

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.261-267
• /
• 2005

A comprehensive DES quality numerical analysis has been carried out for reacting flows in constant-area and divergent scramjet combustor configuration with and without a cavity. Transverse injection of hydrogen is considered over a broad range of injection pressure. The corresponding equivalence ratio of the overall fuel-air mixture ranges from 0.167 to 0.50. The work features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the pervious studies. Much of the flow unsteadiness is related not only the cavity, but also to the intrinsic unsteadiness in the flowfield. The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The roles of the cavity, injection pressure, and heat release in determining the flow dynamics are examined systematically.