• 한국추진공학회지
• /
• 제14권6호
• /
• pp.45-52
• /
• 2010

본 논문에는 분리장치 종류 중 하나인 가스푸셔와 가스발생기의 수학적-물리적 모델이 기술되어있다. 준정상상태 모델이 가스푸셔와 가스발생기로 구성된 PAD의 성능해석을 위해 도입되었다. 실험적 상수인 열손실계수와 마찰계수는 시험에 의해 결정되었다. 그레인 형상설계에 기초한 가스발생기와 가스푸셔 내부의 연소과정, 유동과 피스톤 거동이 수치해석적 방법으로 시뮬레이션 되었다. 개발된 예측기법은 향후 유사한 분리메카니즘 시스템 설계시에 유용하게 사용될 수 있을 것이다.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.336-340
• /
• 2010

Ultrasound thermography detects defects by radiating 20 ~ 30 kHz ultrasound waves to the samples and capturing the heat generated from the defects with the use of an infrared thermographic camera. This technology is being spotlighted as a next-generation NDE for the automobile and aerospace industries because it can test large areas and can detect defects such as cracks and exfoliations in real time. The heating mechanism of the ultrasound vibration has not been accurately determined, but the thermomechanical coupling effect and the surface or internal friction are estimated to be the main causes. When this heat is captured by an infrared thermographic camera, the defects inside or on the surface of objects can be quickly detected. Although this technology can construct a testing device relatively simply and can detect defects within a short time, there are no reliable data about the factors related to its detection ability. In this study, the ultrasound thermography technique was used to manufacture gasoline and diesel engine piston specimens, and nondestructive reliability tests to verify the applicability and validity of the ultrasound thermography technique.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.225-228
• /
• 2009

추력 75톤급 액체로켓엔진용 기술개발/검증 시제인 가스발생기의 연소시험이 수행되었다. 가스발생기 분사기 및 헤드의 성능을 먼저 확인하기 위해 heat-sink 형태의 연소실이 사용되었다. 본 논문에서는 연소시험을 위한 준비상황 및 기술검증시제 연소시험에서 얻어진 압력, 온도 분포, 압력 섭동 등의 결과들을 설명하였다.

• 항공우주기술
• /
• 제8권1호
• /
• pp.17-25
• /
• 2009

복사전달식에서 흡수 계수의 정확한 계산은 액체 엔진 저부의 단열재 설계의 입력 값으로 사용되는 플룸의 복사 열전달을 예측하는데 매우 중요하다. 이를 위해서 가스 흡수 계수를 직접 모델링 할 수 있는 WNB 모델을 중요 인자의 선정을 위주로 설명하였고, 그 결과를 비교적 정확한 기준 값을 제공하는 SNB의 결과와 비교하였다. 비교 인자들은 총 방사율, 좁은밴드 복사강도 및 총 복사강도이며, 결과적으로 방사율의 경우 주어진 조건에서 3.1% 이내, 총 복사 강도역시 5%이내의 계산결과를 보여 이 모델의 타당성을 확인할 수 있었다. 추가적으로, 액체 엔진의 연소가스들의 성분비를 예측하고 이 조건에 대한 가스모델링 인자를 계산하여 데이터베이스를 구축하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.247-251
• /
• 2010

It is very difficult to understand and estimate the heat transfer and flow characteristics in the combustor, which is one of main components in the Auxiliary Power Unit (APU), because its flow filed has very complex structure. In this paper, specified is characteristics of injection and flow through different air goles in the liner, which consist of large circular holes film cooling holes, and tangential air swirl holes. The durability of the liner depends on whether the surface of the liner is exposed to the hot gas over 1000 $^{\circ}C$ of a temperature or net. It is proved that the locations of hot spots estimated from the calculation using CFD are matched well with that from the test. In this study, CFD simulations were performed to examine the heat transfer and temperature distributions in and about a liner wall with film cooling on the wall. This computational study is based on the ensemble average continuity, compressible Navier-Stokes, energy, and PDF combustion equations closed by the standard $k-{\varepsilon}$ turbulence model with standard wall functions for the gas phase and the Fourier equations for conduction in the solid phase.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.847-853
• /
• 2008

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Circle fin exhaust pipes were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The designs adopted in this study were exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe Technique The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10nm), surface forces are increasingly important. Nanoparticles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^{4}$.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.543-554
• /
• 2000

The engineering equations, which have been used in many engineering companies, were employed for the dynamic modelling part in order to develop the naturally circulated boiler simulator. The fuzzy algorithm, which is similar to the algorithm of making decision by the human being, was developed for the boiler simulator controller and its simulated variables were compared with those of classical PID simulations to verify the stability and the effectiveness of fuzzy controller. The simulator is for the naturally circulated boiler and the main components are the furnace, the drum, the super heater, and the economizer. The combustion and thermal radiation dominant equations were used within the furnace and the mass conservation and the energy rate balance equations were employed for the drum part. The heat transfer rates were calculated using the logarithmic mean temperature differences both for the super heater and for the economizer. The simulations are very useful to understand the boiler operations and the engineering design of the main components. The main program was developed under the PC window condition by linking the fuzzy controller to the main boiler program using the Visual C++ language. The various operational conditions such as the abrupt changes of load, the changes of water supply pipes and the diameter of drum were simulated.

• 소음진동
• /
• 제6권6호
• /
• pp.701-708
• /
• 1996

Diesel power plants are frequently used as a power supplier on the island and the isolated places where electric power is required. The heat efficiency of the low speed 2 stroke diesel engines is higher than those of 4 stroke diesel engines or other heat engines and further its mobility and durability is also better than other engines. They can be also easily repaired and maintained. With these advantages, demand for the use of the low speed 2 stroke diesel engine as a power source is increasing. However, there are some disadvantages with these diesel engines such as the bigger vibrating excitation forces generated by higher combustion pressure in cylinder and by the inertia force of the reciprocating parts. Further, engine vibrations are transfered into their adjacent buildings and manufacturing factories and eventually produces local vibrations. In order to reduce X-mode vibration of engine body, several methods have been introduced in the recent researches. In this paper, accordingly, a new vibrationcontrol method applying a synchrophaser and a top bracing between two diesel engines is adopted in order to reduce these structural vibrations of diesel power plant. It was experimentally verified that the structural vibrations were greatly reduced by the phase adjustment for the 6th order X-mode vibration with the synchrophaser and the top bracing.

• 한국화재소방학회논문지
• /
• 제18권3호
• /
• pp.39-44
• /
• 2004

Pool화재의 화염 거동을 알아보기 위하여 산업에서 많이 사용되는 가연성 액체인 아세톤 메탄을 헥산 그리고 헵탄을 직경 50mrn에서 400nun까지의 용기 내에 넣고 연소실험을 하였다. 용기의 재질은 스테인리스와 구리를 사용하였다. 연소시간과 용기 벽면의 온도 및 열유속 등을 측정하였으며 연소 시 화염의 거동은 비디오카메라를 이용하여 촬영하였다. 실험을 통해서 연소속도와 화염의 높이는 용기 직경의 증가와 함께 증가하였으며 화염의 와류 생성 주기는 용기 직경에 반비례하였다. 또한 pool화재의 특성은 액체연료의 물리 화학적 성질과 용기의 재질에 의해서도 영향을 받는 것을 알 수 있었다.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.32-40
• /
• 2017

The current status of Performance-Based Design (PBD) implemented in 4 wide areas (Seoul, Gyeonggi, Incheon and Busan) over the past 5 years was reviewed with regard to the number of PBD implementation and target buildings. Then, detailed status related to fire scenarios, input information for fire simulation, and grid size were analyzed with the pre-review for the PBD. As a result, the domestic PBD was mainly applied to the mixed occupancy. In the fire simulations performed on the identical fire scenario and fire space, the maximum heat release rate (HRR) varied significantly depending on the PBD designer. Various combustibles were also considered for the identical fire source, and their combustion properties also showed considerable uncertainty. In addition, the applicability of accurate input information for predictive models of heat and smoke detectors was examined. Finally, the average grid size for the fire simulation using Fire Dynamics Simulator (FDS) was analyzed, and the improvement of PBD to minimize designer dependency was proposed.