• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.16-23
• /
• 2019

본 논문은 국방과학연구소 엔진 시험장에 설치된 페리스코프 시스템의 설계 및 해석에 대해 다루고 있다. 페리스코프 시스템은 엔진 후단, 디퓨저 상단에 설치되어 있는 잠망경 모양의 관측 시스템이며 엔진 후단 고온(2300 K)의 연소 생성물 등에 직접적으로 영향을 받아서 파손 위험이 높다. 따라서 1차원 열전달 계산 및 2차원, 3차원 CFD 해석을 통해 열유속 및 정온도 분포를 확인하고 이를 통해 냉각 성능을 검증하였다. 현재의 설계에서 페리스코프 시스템을 통해 화염 형상 및 노즐 제어, 배출 유동의 안정성을 가시적으로 확인 가능하다.

• 한국추진공학회지
• /
• 제22권2호
• /
• pp.29-37
• /
• 2018

5 N 급 단일추진제 추력기를 이용하여 ADN 기반 고성능 친환경 단일추진제의 연소 시험을 수행했다. ADN 기반 추진제 및 촉매의 제작을 진행했으며, DSC-TG 분석을 통한 검증을 진행했다. 연소 시험 시 촉매 반응기 내에서 작은 규모의 연소 불안정 현상이 발생했지만, 촉매 반응기 전단에서의 높은 온도를 관찰하여 제작된 추진제의 촉매 연소가 발생했음을 파악했다. 향후 보다 높은 열적 안정성을 확보하기 위해 추진제의 높은 단열 분해 온도를 견딜 수 있는 촉매의 개발을 수행하고 이를 적용할 예정이다.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.250-256
• /
• 2014

EV(Electric Vehicle) has many benefits such as prevention of global warming and so on. But due to driving source changing from combustion engine to battery and e-motor, new R&D difficulties have arisen which changing of desired vehicle performance and multidisciplinary design constraints by means of strong coupled multi-physics domain problems. Additionally, dynamics performances of EV becomes more important due to increasing customer's demands and expectations for EV in compare with internal combustion engine vehicle. In this paper suggests model based development platform of EV through integrated simulation environment for improving analyse & design accuracy in order to solve multi-physics problem. This simulation environment is integrated by three following specialized simulation tools IPG CarMaker, AVL Cruise, DYMOLA that adapted to each purpose. Furthermore, control algorithm of TV(Torque Vectoring) system is developed using independent driven e-motor at rear wheels for improving handling performance of EV. TV control algorithm and its improved vehicle performances are evaluated by numerical simulation from standard test methods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.840-845
• /
• 2001

Development of a small gas-turbine combustor for 100kW class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swirler in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of 1170K, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than target value. So, we redesigned the second prototype(TS2) and conduct performance test with the critical focus on pattern factor and exit mean temperature. We adopted TS2 four variant to check the improvement of pattern factor. As the result, the pattern factors of several variants were satisfied with the performance target. Finally, We chose the TS2A variant as a final combustor for our APU model.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.840-848
• /
• 1998

The preliminary design and performance test were carried out for determining dimensions of gas turbine combustor. The combustor design program was developed and applied to design our combustor, and the specific dimensions for swirler, dome and liner holes were determined by the semiempirical manner. Based on the first performance test data, the swirl angle governing the combustion characteristics of primary combustor zone was determined as 40 deg.. Using the second performance test data, the swirler dimensions were readjusted by 24 mm i.d., 34 mm o.d., and swirl angle of 45 deg.. The geometry of liner holes were determined by considering the flame stability and recirculation zone size. It was found that flame can be more easily stabilized by adjusting the swirler dimensions rather than liner holes. The geometry of swirler and liner holes were readjusted by using the final performance test data with dilution holes. Also, the combustor performance and emission characteristics were evaluated by analysis of exhaust gases.

• 한국추진공학회지
• /
• 제15권1호
• /
• pp.69-75
• /
• 2011

한국형발사체 엔진에 사용될 예정인 75톤급 연소기 채널냉각형 기술검증시제에 대한 연소시험을 수행하였다. 설비 공급 능력과 구조물 강도 제한으로 정상 유량의 50% 수준에서 시험이 수행되었다. 75톤급 채널냉각 연소기의 저압연소시험을 통해 점화구간과 연소구간에서의 작동성과 안정성이 확인되었다. 더불어 75톤 연소기의 성능요구조건을 만족시킬 수 있을 것으로 추정할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.71-74
• /
• 2010

한국형발사체 엔진에 사용될 것으로 예상되는 75톤급 연소기의 기술검증시제를 이용하여 2회 연소시험을 수행하였다. 설비 공급 능력과 구조물 강도 제한으로 정상 유량의 50% 수준에서 시험이 수행되었다. 채널냉각 연소기를 이용한 저압연소시험을 통해 점화구간과 연소구간에서의 신뢰도와 안정성이 확인되었다. 더불어 75톤 연소기가 성능요구조건을 만족시킬 수 있을 것으로 추정할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.907-913
• /
• 2011

Swirling flows are related to the spiral motion in the tangential direction in addition to the axial and radial direction using several swirl generators. These type of flows are used in combustion chambers to improve flame stability, heat exchanger to enhance heat transfer coefficients, agricultural spraying machines and some vertical pipes to move slurries or transport of materials. However, only a few studies three dimensional velocity profiles in a vertical pipe have been reported. In this present paper, 3 dimension particle image velocimetry(PIV) technique was employed to measure the velocity profiles in water along a vertical circular pipe with Reynolds number from 6000 to 13,000. A tangential inlet condition was used as the swirl generator to produce the required flow. The velocities were measured with swirling flow in the water along the test section using the PIV technique.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.183-196
• /
• 1997

Gas flow field within the cylinder which is called a tumble flow is important factor in improving lean combustion stability. In this study, steady state flow tests were performed to quantify tumble ratio of flowfields generated by a tumble intensifying valve(TIV). In addition, velocity and fluctuation profiles in an intake port and flowfields in th cylinder were inspected using a hotwire anemometer and a laser light sheet method with various TIV configurations. These experimental results show that installated TIV has a great effect on flow field distribution in an intake port and test effects enhance a tumble flow in the cylinder.

• 로봇학회논문지
• /
• 제17권4호
• /
• pp.477-483
• /
• 2022

In this paper, we propose waste collection vehicle system with a safety device for worker safety and an autonomous driving function. The steering system is applied as MDPS (Motor Drive Power Steering) system to control the waste collection vehicle of the internal combustion engine. Safety-related errors is prevented through redundancy brake of the integrated system and the control braking system. In order to ensure safety between workers and waste collection vehicles, work guidelines and safety devices for emergency stop in case of danger are applied to vehicles. In addition, this research is conducted on improving the working efficiency through vehicle condition monitoring system and a short-range control system for field test. This research is aimed to secure stability through demonstration and contribute to the industrialization of unmanned waste collection vehicles.