• 제목/요약/키워드: Combustible Gas

검색결과 181건 처리시간 0.022초

접촉연소식 가스 센서의 검지특성 (Detecting Characteristics of Catalytic Combustible Gas Sensor)

  • 박찬원;원창섭;유영한;안형근;한득영
    • 한국전기전자재료학회논문지
    • /
    • 제13권10호
    • /
    • pp.865-870
    • /
    • 2000
  • In this paper, catalytic combustible gas sensor was fabricated and tested under flammable gases such as CH$_4$and $C_4$H$_{10}$by using Pt coil as a heater and/or temperature sensing element. Fine $Al_2$O$_3$powder was used for a bead and Pt, Pd noble metal powder for a catalyst. Resistance variation of Pt wire was traced by the changes of the gas concentrations in a chamber. Output voltage was then monitored to obtain the gas concentration from the resistance variation. In this experiment, MgO was used to protect cracks in the based and TiO$_2$to increase the sensitivity of the sensors. Water glass was also added to enhance the selectivity to the combustible gases.s.

  • PDF

가연성 유해가스 처리를 위한 연소기 개발 (Development of Combustor for Combustible Hazardous Gas)

  • 전영남;채종성;김미환
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.479-485
    • /
    • 1996
  • Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

  • PDF

적외선 가연성 가스검지기의 농도 산출 알고리즘의 설계 및 구현 (Design and Implementation of Concentration Calculation Algorithm for the Infrared Combustible Gas Detector)

  • 한승호;유근준;이연재;김희식;박규태
    • 에너지공학
    • /
    • 제25권1호
    • /
    • pp.145-152
    • /
    • 2016
  • 가스사고 연감에 의하면 최근 가연성 및 독성 가스로 인한 사고가 끊임없이 발생하고 있다. 이러한 사고를 예방하기 위하여 위험지역에서도 안전하게 가스 누출여부를 검사할 수 있는 검지기를 개발하고자 한다. 따라서 본 논문에서는 적외선 가스센서의 응답특성에 근사하는 방정식을 선형회귀를 이용하여 도출하였다. 선형회귀방정식을 통해 도출된 결과를 Neville 반복 보간법을 활용하여 알고리즘을 제안하였다. 또한, 제안한 알고리즘을 시판중인 가연성 가스누출검지기와 한국가스안전공사에서 제조한 7종의 표준가스를 이용하여 시험을 한 결과 성능이 향상될 수 있음을 확인하였다. 향후 경년변화, 온 습도 조건에 따른 성능변화를 분석하고, 방폭구조를 적용한 회로를 적용함으로서 신뢰성과 안정성을 향상시키고자 한다.

연소시 생성된 CO가스의 고찰을 통한 인명피해 최소화 방안에 관한 연구 (A Study on the ways to minimize Casualties through a consideration of the CO gas generated during combustion)

  • 최만철;김병석
    • 대한안전경영과학회지
    • /
    • 제15권1호
    • /
    • pp.133-140
    • /
    • 2013
  • Recently developed a variety of architectural interior decoration according hwadoeme type of toxic gases generated during fire also are becoming diversified, resulting in fatal casualties occurred in the trend is also being increased. During a fire, toxic gas that is generated varies depending on the combustible material occurs. However, all combustible materials, including carbon, incomplete combustion of carbon monoxide which is generated in the most common toxic gases can be seen as one. Accordingly, in this study of organic solids that are generated in case of fire toxic gases, and briefly discuss the characteristics of the risks and, by far the most common Co gas for measures to prevent human casualties, seolbijeok, the temperature dependence, divided into four aspects of administrative daechaekdeung explained.

화재시 생성된 유독가스로부터의 소방 안전관리 방안 연구(Co 가스 대책을 중심으로) (A Study on the Fire Safety Management measures from during a fire toxic gases generated (Focus to Co gas measures))

  • 김병석;장병집;최만철
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2011년도 추계학술대회
    • /
    • pp.55-66
    • /
    • 2011
  • Recently developed a variety of architectural interior decoration according hwadoeme type of toxic gases generated during fire also are becoming diversified, resulting in fatal casualties occurred in the trend is also being increased. During a fire, toxic gas that is generated varies depending on the combustible material occurs. However, all combustible materials, including carbon, incomplete combustion of carbon monoxide which is generated in the most common toxic gases can be seen as one. Accordingly, in this study of organic solids that are generated in case of fire toxic gases, and briefly discuss the characteristics of the risks and, by far the most common Co gas for measures to prevent human casualties, seolbijeok, the temperature dependence, divided into four aspects of administrative daechaekdeung explained.

  • PDF

천연가스의 열용량을 측정하기 위한 촉매가스센서의 특징 (Characterization of A Catalystic Gas Sensor for Measuring Heat Content of Natural Gas)

  • 이기용
    • 한국가스학회:학술대회논문집
    • /
    • 한국가스학회 1997년도 추계학술발표회 논문집
    • /
    • pp.229-235
    • /
    • 1997
  • A low power (300 mW) catalytic bead combustible gas sensor is developed and utilized with a computer controlled sampling system for measuring heat content of natural gas. The heat content of gas is proportional to the change in the energy required to exposure to the sample of combustible gas. The heat content of natural gas samples ranging 36.30 - 39.88 MJ/$m^3$ is measured in the range of approximately $1\%$ error, which is comparable to its nominal heat content. Each gas has a slightly different curve of sensitivity vs. sensor temperature. Thus there Is no temperature at which all sensitivities are equal. In calibration process the choice of a optimum operating temperature is an important factor that influences the overall performance of the measurement system.

  • PDF

가연성 폐기물의 가스화에 관한 연구 (A Study on the Gasification of Combustible Waste)

  • 정준화
    • 한국환경보건학회지
    • /
    • 제16권2호
    • /
    • pp.89-95
    • /
    • 1990
  • This study was investigated to the energy recovery by the pyrolysis of waste tyre. the pyrolysis of the waste tyre was made by using the pyrolysis chamber for the gasification and the combustion chamber for the combustion of the pyrolysis gas. In batch system, the amount of waste tyre was put 150kg in the pyrolysis chamber and the proper air flow rate for the stable production of the pyrolysis gas was 0.95Nm$^{3}$ /min. the production time of the pyrolysis gas was stable above 210minutes, and the stable production rate was above 3.8Nm$^{3}$ /min. The production temperature of pyrolysis gas was 170$^{\circ}$C and combustion temperature of pyrolysis gas was 1,000$^{\circ}$C. The combustible component of washing gas in pyrolysis gas of waste tyre was CO, CH$_{4}$, $C_{2}H_{6}$ and $C_{3}H_{8}$, and total amount was 22.7%. Heat value of condensed material was 9,804Kcal/kg. The average concentration of air pollutants between cyclone and scrubber was CO 420.4ppm, SO$_{x}$ 349.8ppm. NO$_{x}$ 68.Sppm, HCl 24.4ppm and Dust 240.0g / Nm$^{3}$, respectively.

  • PDF

가연성 금속분진 폭발시 저장 및 포집용 구조물에 대한 3차원 유한요소 해석 (3-Dimensional Finite Element Analysis for Collecting Structure of Combustible Metal Dust During Explosion)

  • 장창봉;용종원;백종배;권혁면;고재욱
    • 한국가스학회지
    • /
    • 제15권5호
    • /
    • pp.19-24
    • /
    • 2011
  • 최근 산업구조가 미래 첨단산업 위주로 전환되면서 자동차를 비롯한 항공기, 휴대폰, 전자기기 등 다양한 산업분야의 제품에 Al, Mg, Li, Zn과 같은 가연성 금속의 사용량이 크게 증가하고 있으며 이러한 가연성 금속의 가공과 정에서 발생하는 금속분진에 의한 폭발 사고 또한 증가하고 있다. 금속분진에 의한 폭발사고는 가연성 금속분진을 포집 및 저장하는 국소배기설비의 공기정화장치에서 대부분 발생함에 따라 공기정화장치내 폭발 발생시 폭발압력에 의한 공기정화장치 구조물의 변형과 파열형태를 단순 예측이 아닌 유한요소해석(FEA)법에 의해 기술적으로 분석 및 제시하고자 본 연구를 수행하였다.

가연성가스에 대한 정전기 대전방지복의 정전기 위험성 평가 (Hazard analysis for electrostatic of Electrostatic removing wear about combustible gas)

  • 정재희;서대원;구자혁;이영철;조병학;박성수;류근창;홍성경;김준호
    • 한국가스학회지
    • /
    • 제4권2호
    • /
    • pp.33-36
    • /
    • 2000
  • 가연성가스의 정전기 대전방지복에 대한 정전기 위험성 평가결과 사용기간에 따라 대전압이 증가하는 경향을 나타내었다. 그러나 대전전하량은 정전기 대전 방지복의 기준치인 0.6$\mu$C 이하였다. 대전압이 증가하는 원인은 일반섬유의 부플음 현상 및 기타 현상 때문으로 판단된다. 또한, 제전 방한복 ('96)의 대전전하량은 0.82$\mu$C로 화재$\cdot$폭발 가능성이 있는 것으로 나타났다. 따라서 이에 대한 개선 및 관리대책이 요구된다.

  • PDF

LPG 가연성 혼합물에 대한 고형 금지제의 억제 효과 (Inhibitory Effect of Solid Inhibitors on LPG Combustible Mixtures)

  • Hamdan, M. A.;Yamin, J. A.;Dabbas, R. K.
    • 대한화학회지
    • /
    • 제54권3호
    • /
    • pp.295-299
    • /
    • 2010
  • 액화석유가스-공기 불꽃에 대한 2가지 열적 금지제(즉, 돌가루, 탄산칼슘)의 억제효과를 연구하였다. 이를 위해 이들 금지제를 가하기 전과 후 가연성 혼합물의 가연성 한도를 측정하여 조사하였다. 그 결과, 탄산칼슘이 돌가루에 비해 억제 효과가 우수하였다.