• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.9
• /
• pp.417-423
• /
• 2001

This paper proposes a technique for fault detection and classification for both LIF(Low Impedance Fault)s and HIF(High Impedance Fault)s using Adaptive Network-based Fuzzy Inference System(ANFIS). The inputs into ANFIS are current signals only based on Root-Mean-Square(RMS) values of 3-phase currents and zero sequence current. The performance of the proposed technique is tested on a typical 154 kV Korean transmission line system under various fault conditions. Test results show that the ANFIS can detect and classily faults including (LIFs and HIFs) accurately within half a cycle.

• Genomics & Informatics
• /
• v.6 no.3
• /
• pp.130-135
• /
• 2008

The haplotypes of a 200 kb region in the human chromosome X terminal band (q28) were analyzed using the International HapMap Project Phasell data, which had been collected for three analysis panels (YRI, CEU, and CHB＋JPT). When multiple linkage disequilibrium blocks were encountered for a panel, the neighboring haplotypes that had crossover rate of 5% or more in the panel were combined to generate 'haploid' configurations. This resulted in 8, 7, and 5 'haploid' configurations for the panels of YRI, CEU, and CHB＋JPT, respectively. The multiple sequence alignment of these 'haploids' was used for the calculation of allele-sharing distances and the subsequent principal coordinate analysis. Two 'haploids' in CEU and CHB＋JPT were hypothesized as 'parental' in light of the observations that the successive recombinants of these haploids can model two other haploids in CEU and CHB＋JPT, and that their configurations were consistent with those in YRI. This study demonstrates the utility of haplotype phylogeny in understanding population evolution.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.405-412
• /
• 2004

MC-CDMA, a multicarrier (MC) modulation scheme based on code division multiple access (CDMA), is the most likely candidate for the next generation of mobile radio communications. The rate compatible punctured turbo (RCPT) coded hybrid automatic repeat request (HARQ) has been found to give improved throughput performance in a direct sequence (DS) CDMA system. However, the extent to which the RCPT HARQ improves the throughput performance of an MC-CDMA system has not been fully understood. In this paper, we apply the RCPT HARQ to MC-CDMA and evaluate by computer simulations its performance in a frequency selective Rayleigh fading channel. We found that the performance of RCPT HARQ MC-CDMA is almost insensitive to channel characteristics. The performance can be drastically improved with receive diversity combined with space-time transmit diversity. In addition, the comparison of RCPT HARQ MC-CDMA, orthogonal frequency division multiplexing, and DS-CDMA shows that under similar conditions the throughput of MC-CDMA is the best in a frequency selective fading channel.

• Structural Engineering and Mechanics
• /
• v.6 no.1
• /
• pp.17-30
• /
• 1998

The method of pairwise comparison inherently contains information of ambiguity, fuzziness and conflict in design goals for a multiobjective structural design. This paper applies the principle of paired comparison so that the vaguely formulated problem can be modified and a set of numerically acceptable weight would reflect the relatively important degree of multiple objectives. This paper also presents a fuzzy global criterion method ($FGCM_{\lambda}$) included fuzzy constraints that coupled with the objective weighting rank obtained from the modified pairwise comparisons for fuzzy multiobjective optimization problems. Descriptions in sequence of this combined method and problem solving experiences are given in the current article. Multiobjective design examples of truss and mechanical spring structures illustrate this optimization process containing the revising judgement techniques.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.168-173
• /
• 2005

Composite material is combined with two or more chemical ingredient and different components. FRP has been widely used for the structure of aircraft, ships, automobiles, sporting goods and other machines because of their high specific strength, high specific stiffness and excellent fatigue strength. Recently, the development of machine tool and cutting tool greatly relies on high speed process to satisfy high precision, high efficient machining, shortened process time to maximize material removal rate (MRR) through high cutting speed and feed speed. The research molded CFRP, GFRP as stacking sequence methods of two direction (orientation angle $0^{\circ}\;and\;0^{\circ}/9^{\circ}$) hand lay-up, drilled molded plates using cemented carbide drill and examined chip shapes, surface roughness properties.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.71-77
• /
• 2001

On-machine measuring system of Numerically Control(NC) machines permit computer control of basic material cutting processes of moulds. A part of mould designed within a CAD/CAM system can be manufactured by generation of tool paths by the measuring systems. Since the three-dimensional geometry by AutoCAD of the part is contained in the data base, the manufacturing specialist combined with the appropriate software simulation, can not only create the commands to drive the virtual measuring and standardization of measuring modules but also can check for mistakes by viewing the computer graphics simulation of the tool cutting sequence.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1405-1416
• /
• 1995

An effective algorithm for implementation of unmanned surveillance system which detects moving object from image sequences, predicts the direction of it, and drives the camera in real time is proposed. Outputs of proposed algorithm are coordinates of location of moving object, and they are converted to the values according to camera model. As a pre- processing, extraction of moving object and shape discrimination are performed. Existence of the moving object or scene change is detected by computing the temporal derivatives of consecutive two or more images in a sequence, and this result of derivatives is combined with the edge map from one original gray level image to obtain the position of moving object. Shape discri-mination(Target identification) is performed by analysis of distribution of projection profiles in x and y directions. To reduce the prediction error due to the fact that the motion cha- racteristic of walking man may have an abrupt change of moving direction, an order adaptive lattice structured linear predictor is proposed.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.167-177
• /
• 2012

In this paper, we raised the performance of heuristic algorithm to assign job to workers in parallel line inspection process without sequence. In previous research, we developed the heuristic algorithm. But the heuristic algorithm can't find optimal solution perfectly. In order to solve this problem, we proposed new method to make initial solution called FN(First Next) method and combined the new FN method and old FE method using previous heuristic algorithm. Experiments of assigning job are performed to evaluate performance of this FE+FN heuristic algorithm. The result shows that the FE+FN heuristic algorithm can find the optimal solution to assign job to workers evenly in many type of cases. Especially, in case there are optimal solutions, this heuristic algorithm can find the optimal solution perfectly.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.497-511
• /
• 2004

A PSV (pressurizer safety valve) popping test carried out in the early phases of a refueling outage may trigger a test-induced LOCA(loss of coolant accident) if a PSV fails to fully close and is stuck in a partially open position. According to a KSNP (Korea standard nuclear power plant) low power and shutdown PSA (probabilistic safety assessment), the failure of a high pressure safety injection (HPSI) accompanied by the failure of a PSV to fully close was identified as a dominant accident sequence with a significant impact on low power and shutdown risks (LPSR). In this study, we aim to investigate and verify a new means for mitigating this type of accident using a thermal-hydraulic analysis. In particular, we explore the applicability of an aggressive cool-down combined with operator actions. The results of the various sensitivity studies performed there will help reduce LPSR and improve Refueling outage safety.

• Journal of Microbiology
• /
• v.43 no.1
• /
• pp.49-53
• /
• 2005

Putative genes for a two-component signal transduction system (akbS and akbT) were detected near the alkylbenzene-degrading operon of Rhodococcus sp. DK17. Sequence analysis indicates that AkbS possesses potential ATP-binding and histidine autophosphorylation sites in the N- and C-terminal regions, respectively, and that AkbT has a typical response regulator domain. Mutant analysis combined with RT-PCR experiments further shows that AkbS is required to induce the expression of o-xylene dioxygenase in DK17.