• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3206-3210
• /
• 2013

This study focused on the matrix interference for the qualitative and quantitative analysis of inorganic arsenic species in seaweed by ion chromatography (IC) combined with inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The matrix of seaweed has a significant effect on the determination of inorganic arsenic species. In particular, the retention times of inorganic arsenic species in the in the standard solution were different from those in seaweed because of the matrix interference. Thus, it was not suitable to use the chromatographic method for the determination of the arsenic species in seaweed. We investigated an alternative method for the determination of inorganic arsenic species in seaweed. The method was applied for the seaweed samples such as laver, green laver, sea tangle and sea mustard. The sample extraction methods of the arsenic species were also investigated in this study.

• Advances in Computational Design
• /
• 제7권2호
• /
• pp.129-137
• /
• 2022

Compo-casting method is one of the popular technique to produce metal based matrix composites. But, one of the main challenges in this process is un-uniform spreading of reinforced subdivisions (particles) inside the metallic matrix and the lack of desirable mechanical properties of the final produced composites due to the low bonding strength among the metal matrix and reinforcement particles. To remove these difficulties and to promote the mechanical properties of these kind of composites, the WARM ARB technique was utilized as supplementary technique to heighten the mechanical and microstructural evolution of the casted Al/Al₂O₃ composite strips. The microstructure evolution and mechanical properties of these composites have been considered versus different WARM ARB cycles by tensile test, average Vickers micro hardness test, wear test and scanning electron microscopy (SEM). The SEM results revealed that during the higher warm- ARB cycles, big alumina clusters are broken and make a uniform distribution of alumina particles. It was shown that cumulating the forming cycles improved the mechanical properties of composites. In general, combined compo-casting and ARB process would consent making Al/Al₂O₃ composites with high consistency, good microstructural and mechanical properties.

• Journal of Periodontal and Implant Science
• /
• 제53권6호
• /
• pp.467-477
• /
• 2023

Purpose: The purpose of this study was to evaluate the regenerative capacity of stem cells combined with bone graft material and a collagen matrix in rabbit calvarial defect models according to the type and form of the scaffolds, which included type I collagen matrix and synthetic bone. Methods: Mesenchymal stem cells (MSCs) were obtained from the periosteum of participants. Four symmetrical 6-mm-diameter circular defects were made in New Zealand white rabbits using a trephine drill. The defects were grafted with (1) group 1: synthetic bone (β-tricalcium phosphate/hydroxyapatite [β-TCP/HA]) and 1×10⁵ MSCs; (2) group 2: collagen matrix and 1×10⁵ MSCs; (3) group 3: β-TCP/HA, collagen matrix covering β-TCP/HA, and 1×10⁵ MSCs; or (4) group 4: β-TCP/HA, chipped collagen matrix mixed with β-TCP/HA, and 1×10⁵ MSCs. Cellular viability and cell migration rates were analyzed. Results: Uneventful healing was achieved in all areas where the defects were made at 4 weeks, and no signs of infection were identified during the healing period or at the time of retrieval. New bone formation was more evident in groups 3 and 4 than in the other groups. A densitometric analysis of the calvarium at 8 weeks post-surgery showed the highest values in group 3. Conclusions: This study showed that the highest regeneration was found when the stem cells were applied to synthetic bone along with a collagen matrix.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.141-144
• /
• 2004

A QVGA active-matrix backplane is produced on a 25${\mu}m$ thin plastic substrate. A 4-mask photolithographic process is used. The insulator layer and the semiconductor layer are organic material processed from solution. This backplane is combined with the electrophoretic display effect supplied by SiPix and E ink, resulting in an electronic paper display with a thickness of only 100${\mu}m$. This is world's thinnest active-matrix display ever made.

• 대한전자공학회논문지
• /
• 제12권1호
• /
• pp.27-33
• /
• 1975

한글의 기하학적 배조상의 복잡도로 부터 한글 각 자소의 character generator용 diode matrix의 size를 추산하고 이자소 matrix 3성(초성, 중성, 종성)의 OR동작으로시 모아쓰기 한글의 모든 조합이 가능합을 보였고 수평각음순가성과 수직모음용초성의 자판 선택자, 종성이 있을 때와 없을때의 중용길이의 변경등이 비교적 간단한 논리회로로서 switch될 수 있음을 보였다. 새로 15bit내부 code를 제안하였는데 이는 86개의 sparse diode matrix로시 모든 조합을 다 카버하고 그러면서도 decodig기구의 규모를 줄여준다. The required minimum size of character diode matrix of Korean letters is estimated from the topological complexity of letter structure. The OR aombination of three letter boards (diode matrice) gives all possible Hangout whole letters in proper traditional combined form with minimum required discernibility. Two forms of first consonants (centre located ones for horizontal vowels and leftward displaced ones for vertical and composed vowels) are switched by only 1 bit of the vowel code. The vowel pattern length is modified by again the last four bits of the code. A new 15bit sized inner code is proposed which permits considerably small sized decoding mechanism.

• Composites Research
• /
• 제14권5호
• /
• pp.1-11
• /
• 2001

본 논문은 금속복합재료를 반용융상태로 재가열하여 Thixoforming을 하는데 필요한 소재를 제공하기 위한 장비 설계와 제조방법 등에 관한 내용을 소개하고 있다. 장비 설계에서 기지재내에 강화재가 균일하게 분산되도록 하기 위하여 강화재의 연속주입 방법과 강화재의 온도를 제어하는 방법을 소개하고 있다. 일정한 양의 강화재를 기지재료 내에 분산시키는 것은 균일 혼합을 위하여 필요한 기술이다. 또한 분산시 강화재의 수분제거를 위하여 강화재의 온도를 제어하면서 연속적으로 강제분산시키는 것은 균일분산을 위하여 필요하다. 기지재의 초정 $\alpha$의 크기가 강화재의 분산성에 크게 영향을 미치기 때문에 기지재의 초기 온도가 초정$\alpha$의 크기에 미치는 영향 등을 검토하여 복합재료 빌렛트의 제조조건에 이용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.180-183
• /
• 1997

The forming process of metal matrix composites by the die casting and squeeze casting process are limited in size and dimension in term of final parts without machining. The thixoforming process for metal matrix composites has numerous advantages compared to die casting, squeeze casting and compocasting. The characteristics of thixoforming process can decrease the liquid segregation because of he improvement in fluidity in a globular microstructure state and utilizes flow without air entrapment. Therefore, in order to obtain the sound parts of metal matrix composites by using thixoforming process which as co-existing solidus-liquidus pahse, it si very important to obtain reheating condition. However, for he thixoforming process, the billet with the desired volume fraction must be heated to obtain a uniform temperature distribution over the entire cross-sectional areas. To obtain the reheating conditions of composites, the particulate reinforced metal matrix composites for thixoforming were fabricated by combined stirring process which is simultaneously performed with electro-magnetic stirring process which is simultaneously performed with electro-magnetic stirring and mechanical stirring process.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.74-80
• /
• 2008

This paper develops a direct torque control method (DTC) using a matrix converter fed induction motor. The advantages of matrix converters are combined with the advantages of the DTC technique; under the constraint of the unity input power factor, the required voltage vectors are generated to implement the conventional DTC method of induction motor. The proposed DTC algorithm is applied to induction motors and the experimental results are given in steady-state and transient conditions, while the discussion about the trend of the DTC method using the MC is also carried out. Furthermore, the entire system of the matrix converter configuration using 7.5kW IGBT module is explained in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.385-388
• /
• 2001

In part forming process of metal matrix composites, the die casting and squeeze casting process are limited the size and dimension in term of final parts without machining. The thixoforming process for metal matrix composites has numerous advantages compared to die casting squeeze casting and compocasting. However, for the thixoforming process, the billet with the desired volume fraction must be heated to obtain a uniform temperature distribution over the entire cross-sectional areas. To obtain the reheating conditions of composites, the particulate reinforced metal matrix composites for thixoforming were fabricated by combined stirring process which is simultaneously performed with electro-magnetic stirring and mechanical stirring process.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.445-450
• /
• 2018

Reliable detection and parameter estimation of a radar cross section(RCS) fluctuating target have been known as a difficult task. To reduce the effect of RCS fluctuation, various diversity techniques have been considered. This paper presents a new method for synthesizing a covariance matrix applicable to a coherent multi-input multi-output(MIMO) radar with frequency diversity. It is achieved by efficiently combining covariance matrices corresponding to different carrier frequencies such that the signal-to-noise ratio(SNR) in the combined covariance matrix is maximized. The value of a synthesized covariance matrix is assessed by examining the phase curves of its entries and the improvement on direction of arrival(DOA) estimation.