• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.4
• /
• pp.347-355
• /
• 2019

As a solution to the growing concern on the global warming, researches are being actively carried out to apply carbon dioxide capture and storage technology to power generation systems. In this study, the integrated gasification combined cycle (IGCC) adopting oxy-combustion carbon capture was modeled and the effect of replacing the conventional air separation unit (ASU) with the ion transport membrane (ITM) on the net system efficiency was analyzed. The ITM-based system was predicted to consume less net auxiliary power owing to an additional nitrogen expander. Even with a regular pressure ratio which is 21, the ITM-based system would provide a higher net efficiency than the optimized ASU-based system which should be designed with a very high pressure ratio around 90. The optimal net efficiency of the ITM-based system is more than 3% higher than that of the ASU-based system. The influence of the operating pressure and temperature of the ITM on system efficiency was predicted to be marginal.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.123-130
• /
• 2010

A steering control system based on CAN(Controller Area Network) for autonomous tractor was developed to reduce duty of a central processing computer and to improve performance of steering control in terms of reduced control interval and error. The steering control system consisted of a SCU (Steering Control Unit), an EHPS system, and a potentiometer. The SCU consisted of an MCU (Micro Controller unit), an A/D converter, and a DC-DC converter, and a PID controller was used to control steering angle. The steering control system was communicated with the computer by CAN-bus. Each actuator and implement was connected to a multi-function board interfacing with the computer through a USB cable. Without CAN, control interval of the autonomous tractor was 1.5 seconds. When the CAN-based steering control system was combined with the autonomous tractor, however, control interval of the integrated system was reduced to those less than 0.05 seconds. When the autonomous tractor was operated with 1.5-s and 0.05-s control cycles at a 0.63-m/s travelling speed, the trajectories were close to straight lines for both of the control cycles. For a 1.34-m/s traveling speed, tractor trajectory was close to sine wave with a 1.5-s control cycle, but was straight line with a 0.05-s control cycle.

• Plant Journal
• /
• v.9 no.1
• /
• pp.36-42
• /
• 2013

In this study, repowering scenarios are analyzed and evaluated from the economical point of view on a case by case basis. Based on the result of evaluation, the IRR indicates 2.34% on single 750 MW LNG combined cycle unit, 3.56% on 500 MW sub-bituminous PC units and 2.31% on 200 MW circulating fluidized bed combustion units, resulting in not reaching 7% rate of discount rate and being concluded uneconomical. However, proposes that it is most economical and feasible to repower power plant into 750 MW LNG combined cycle unit as long as the economic feasibility can be improved and it is necessary for old anthracite power plant to be repowered than rebuilt under the circumstances of lacking power supply.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.4
• /
• pp.311-321
• /
• 2005

A competitive generating company (GENCO) could maximize its payoff by optimizing its generation assets. This paper considers the GENCO's arbitrage problem using price-based unit commitment (PBUC). The GENCO could consider arbitrage opportunities in purchases from qualifying facilities (QFs) as well as simultaneous trades with spots markets for energy, ancillary services, emission, and fuel. Given forecasted hourly market prices for each market, the GENCO's generating asset arbitrage problem is formulated as a mixed integer program (MIP) and solved by a branch-and-cut algorithm. A GENCO with 54 thermal and 12 combined-cycle units is considered for analyzing the proposed formulation. The proposed case studies illustrate the significance of simultaneous arbitrage by applying PBUC to multi-commodity markets.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.334-336
• /
• 2000

In Korea, the CCGTs have been installed to about 25% of the total generating capacity. Generally CCGTs determine the System Marginal Prices(SMP) in Cost Based Generation Pool. So the scheduling of CCGTs is very important in daily generation scheduling. This paper describes the scheduling of CCGTs which considers the operating characteristics of them. We use lagrangian relaxation method which decomposes the unit committment problem into the subproblems of the individual unit. In the CCGT subproblem, we define the cost function of CCGT in two way. In Case study, the daily generation scheduling is performed using the data of Korean thermal system.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.885-892
• /
• 2011

In this study, LCA(Life Cycle Assessment) on 'Saemangum CSO Project' was carried out to evaluate environmental impact which occurred during the construction and operation periods and the potential environmental impact reduction was analyzed by comparing production and reduction level of pollution loads. LCA was conducted out according to the procedure of ISO14040 which suggested Goal and Scope Definition, Life Cycle Inventory Analysis, Life Cycle Impact Assessment and Interpretation. In the Goal and Scope Definition, the functional unit was 1 m3 of CSO, the system boundary was construction and operation phases, and the operation period was 20 years. For the data collection and inventory analysis, input energies and materials from civil, architecture, mechanical and electric fields are collected from design sheet but the landscape architecture field is excepted. LCIA(Life Cycle Impact Assessment) was performed following the procedure of Eco-Labelling Type III under 6 categories which were resource depletion, eutrophication, global warming, ozone-layer destruction, and photochemical oxide formation. In the result of LCA, 83.4% of environmental impact occurred in the construction phase and 16.6% in the operation phase. Especially 78% of environmental impact occurred in civil works. The Global warming category showed the highest contribution level in the environmental impact categories. For the analysis on potential environmental impact reduction, the reduction and increased of environmental impact which occurred on construction and operation phases were compared. In the case of considering only the operation phase, the result of the comparison showed that 78% of environmental impact is reduced. On the other hand, when considering both the construction and operation phases, 50% of environmental impact is increase. Therefore, this study showed that eco-friendly material and construction method should be used for reduction of environmental impact during life cycle, and it is strongly necessary to develop technology and skills to reduce environmental impact such as renewable energies.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2003

Pressurized fluidized bed combustion unit is operated at pressures of 1~1.5 MPa with combustion temperatures of 850~87$0^{\circ}C$. The pressurized coal combustion system heats steam, in conventional heat transfer tubing, and produces a hot gas supplied to a gas turbine. Gas cleaning is a vital aspect of the system, as is the ability of the turbine to cope with some residual solids. The need to pressurize the feed coal, limestone and combustion air, and to depressurize the flue gases and the ash removal system introduces some significant operating complications. The proportion of power coming from the steam : gas turbines is approximately 80:20%. Pressurized fluidized bed combustion and generation by the combined cycle route involves unique control considerations, as the combustor and gas turbine have to be properly matched through the whole operating range. The gas turbines are rather special, in that the maximum gas temperature available from the FBC is limited by ash fusion characteristics. As no ash softening should take place, the maximum gas temperature is around 90$0^{\circ}C$. As a result a high pressure ratio gas turbine with compression intercooling is used. This is to offset the effects of the relatively low temperature at the turbine inlet.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.188-194
• /
• 2001

The process simulations are made on the IGCC power plant using heavy residue oil from refinery process. In order to model combined power block of IGCC, the present study employs the gas turbine of MS7001FA model integrated with ASU (Air Separation Unit), and considers the air extraction from gas turbine and the combustor dilution by returned nitrogen from ASU. The exhaust gas energy of gas turbine is recovered through the bottoming cycle with triple pressure HRSG (Heat Recovery Steam Generator). Clean syngas fuel of the gas turbine is assumed to be produced through Shell gasification of Visbreaker residue oil and Sulfinol-SCOT-Claus gas cleanup processes. The process optimization results show that the best efficiency of IGCC plant is achieved at 20% air extraction condition in the case without nitrogen dilution of gas turbine combustor find at the 40% with nitrogen dilution. Nitrogen dilution of combustor has very favorable and remarkable effect in reducing NOx emission level, while shifting the operation point of gas turbine to near surge point.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.45-48
• /
• 1999

석탄가스화복합발전(Integrated Gasification Combined Cycle)기술은 우수한 환경성능과 열성능을 지니고 있어 장래 미분탄화력을 대신할 수 있는 대체기술로서 각광을 받고 있다. IGCC는 석탄가스화, 정제, 복합발전계통 및 공기분리계통 등 그 구성요소가 복잡하여 이들간의 시스템 최적화 정도에 따라 경제성 및 플랜트 성능이 크게 좌우된다. 최근에 가스터빈과 공기분리설비(Air Separation Unit)를 연계시켜 IGCC플랜트 성능을 향상시키는 연구가 다수 진행되었다[1],[2],[3]. 본 연구에서는 가스터빈과 ASU 간의 연계시 공기추출량을 결정하는 인자들을 검토하고 Texaco quench 가스화공정을 채용한 IGCC 플랜트에 대해 GatecCyle code등 상용코드를 이용하여 모델링하고 가스터빈 압축기 공기추출량에 따른 IGCC 플랜트 성능을 분석하였다. 본 연구 결과를 통하여 대상 IGCC 플랜트의 적정 공기추출량을 결정하고 플랜트 성능을 계산하였다. 본 연구 결과는 전력연구원에서 수행중인 300MW급 IGCC 예비기본설계에 활용될 것이다.(중략)

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.1-6
• /
• 2017

Total capacity of pumped hydro storage(PHS) in Korean power system reaches 4,700MW, though the share of it is about 4.56% of total capacity The Unit Commitment program, E-terracommit which is used for the operational purpose by KPX, includes the PHS model. But the model has a defect that it does not include the information of water level of upper reservoir. Therefore two types of improved the PHS models are represented in this paper. The first model is a optimized model by connecting the upper reservoir water level to the non-spinning reserve. The other model is to have priority allocate both the PHS and combined cycle generator for non-spinning reserve. The proposed two models and the E-terracommit model is compared and resulting to have improvement in estimating non-spinning reserve when using the proposed models.