• Structural Engineering and Mechanics
• /
• v.83 no.5
• /
• pp.693-707
• /
• 2022

Bonded joints have proven their performance against conventional joining processes such as welding, riveting and bolting. The single-lap joint is the most widely used to characterize adhesive joints in tensile-shear loadings. However, the high stress concentrations in the adhesive joint due to the non-linearity of the applied loads generate a bending moment in the joint, resulting in high stresses at the adhesive edges. Geometric optimization of the bonded joint to reduce this high stress concentration prompted various researchers to perform geometric modifications of the adhesive and adherends at their free edges. Modifying both edges of the adhesive (spew) and the adherends (bevel) has proven to be an effective solution to reduce stresses at both edges and improve stress transfer at the inner part of the adhesive layer. The majority of research aimed at improving the geometry of the plate and adhesive edges has not considered the effect of temperature and water absorption in evaluating the strength of the joint. The objective of this work is to analyze, by the finite element method, the stress distribution in an adhesive joint between two 2024-T3 aluminum plates. The effects of the adhesive fillet and adherend bevel on the bonded joint stresses were taken into account. On the other hand, degradation of the mechanical properties of the adhesive following its exposure to moisture and temperature was found. The results clearly showed that the modification of the edges of the adhesive and of the bonding agent have an important role in the durability of the bond. Although the modification of the adhesive and bonding edges significantly improves the joint strength, the simultaneous exposure of the joint to temperature and moisture generates high stress concentrations in the adhesive joint that, in most cases, can easily reach the failure point of the material even at low applied stresses.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.35 no.4
• /
• pp.77-90
• /
• 2022

Objectives: This study was aimed to figure out korean medicine doctors' opinion and treatment of Korean medicine clinical practice guidelines (CPG) for premenstrual syndrome (PMS). Methods: We conducted a questionnaire survey targeting korean medicine doctors belonging to the Korean Association of Oriental Medicine by e-mail and text and analyzed the answers. Results: 1. The average monthly number of patients visiting the respondents' clinics for PMS was 2.7, the main age group was 20-30s (80.8%) and the treatments the patients given before were mostly western treatments such as painkiller and combined oral contraceptives. 2. The treatment period for PMS was mostly less than 3 months (69%), and the frequency of acupuncture treatment was the most twice per week (41.1%). 3. The most effective herbal medicine for affective symptoms was Soyo-san, and for physical symptoms was Gyejibokryung-hwan. The most commonly used acupuncture point was 三陰交 (SP6). 4. Other opinions of the clinicians about Korean medicine clinical practice guideline of PMS were the need for promotion of PMS, convenience of taking herbal medicines and price competitiveness. Conclusions: We figured out korean medicine doctors' opinion of PMS CPG, clinical diagnosis and treatment.

• Geomechanics and Engineering
• /
• v.31 no.5
• /
• pp.519-527
• /
• 2022

Shear failure in soil is the primary cause of most geotechnical structure failures or instability. Soil water content is a significant factor affecting soil shear strength. In this study, the shear strength of samples with different water contents was tested. The shear strength, cohesion, and internal friction angle decreased with increasing water content. Based on the variation of cohesion and internal friction angle, the water content zone was divided into a high-water content zone and low-water content zone with a threshold water content of 15.05%. Cohesion and internal friction angle have a good linear relationship with water content in both zones. Environmental Scanning Electron Microscopy (ESEM) test presented that the aggregates size of the compacted loess gradually increases with increasing water content. Meanwhile, the clay in the compacted loess forms a matric that envelops around the surface of the aggregates and fills the inter-aggregates pores. A quantitative analysis of bound water and free water under different water contents using a nuclear magnetic resonance (NMR) test was carried out. The threshold water content between bound water and free water was slightly below the plastic limit, which is consistent with the results of shear strength parameters. Combined with the T2 distributions obtained by NMR, one can define a T2 relaxation time of 1.58 ms as the boundary point for bound water distribution without free water. Finally, the effects of bound water and free water on shear strength parameters were analyzed using linear regression analysis.

• Restorative Dentistry and Endodontics
• /
• v.48 no.2
• /
• pp.16.1-16.11
• /
• 2023

Objectives: The aim of this study was to evaluate the influence of peak kilovoltage (kVp) and a metal artifact reduction (MAR) tool on image quality and the diagnosis of vertical root fracture (VRF) in cone-beam computed tomography (CBCT). Materials and Methods: Twenty single-rooted human teeth filled with an intracanal metal post were divided into 2 groups: control (n = 10) and VRF (n = 10). Each tooth was placed into the socket of a dry mandible, and CBCT scans were acquired using a Picasso Trio varying the kVp (70, 80, 90, or 99), and the use of MAR (with or without). The examinations were assessed by 5 examiners for the diagnosis of VRF using a 5-point scale. A subjective evaluation of the expression of artifacts was done by comparing random axial images of the studied protocols. The results of the diagnoses were analyzed using 2-way analysis of variance and the Tukey post hoc test, the subjective evaluations were compared using the Friedman test, and intra-examiner reproducibility was evaluated using the weighted kappa test (α = 5%). Results: The kVp and MAR did not influence the diagnosis of VRF (p > 0.05). According to the subjective classification, the 99 kVp protocol with MAR demonstrated the least expression of artifacts, while the 70 kVp protocol without MAR led to the most artifacts. Conclusions: Protocols with higher kVp combined with MAR improved the image quality of CBCT examinations. However, those factors did not lead to an improvement in the diagnosis of VRF.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1075-1084
• /
• 2022

The use of Hi-Tech in cultural heritage preservation and the promotion of cultural heritage values in general, particularly artifacts, opens new opportunities for attracting tourists while also posing a challenge due to the need to reward high-quality excursions to visitors historical and cultural values. Building Information Modeling (BIM) and Hi-Tech in new building management have been widely adopted in the construction industry; however, Historic Building Information Modeling (HBIM) is an exciting challenge in 3D modeling and building management. For those reasons, the Scan-to-HBIM approach involves generating an HBIM model for existing buildings from the point cloud data collected by Terrestrial 3D Laser Scanner integrated with Virtual Reality (VR), Augmented Reality (AR), contributes to spatial historic sites simulation for virtual experiences. Therefore, this study aims to (1) generate the application of Virtual Reality, Augmented Reality to Historic Building Information Modeling - based workflows in a case study which is a monument in the city; (2) evaluate the application of these technologies to improve awareness of visitors related to the promotion of historical values by surveying the experience before and after using this application. The findings shed light on the barriers that prevent users from utilizing technologies and problem-solving solutions. According to the survey results, after experiencing virtual tours through applications and video explanations, participant's perception of the case study improved. When combined with emerging Hi-Tech and immersive interactive games, the Historic Building Information Modeling helps increase information transmission to improve visitor awareness and promote heritage values.

• Journal of Environmental Science International
• /
• v.32 no.5
• /
• pp.315-328
• /
• 2023

Cyanobacteria have been used as pollution indicator species in freshwater ecosystems, and identifying their fluctuations can be an important part about management of surface waters globally. Cyanotoxins produced by cyanobacteria are directly or indirectly a threat to human and environmental health. In order to confirm the potential risk of these cyanotoxins, the fluctuations of phytoplankton and phylogenetic analysis of cyanotoxin synthetase genes were conducted at each point in the Yeongsan River water system in Gwangju from November 2021 to October 2022. Diatoms which grow well in winter were dominant at 99.4 ~ 99.5%, and diatoms and green algae were dominant from the spring to autumn when the water temperature rises. Stephanodiscus spp. were dominant at 92.7 to 97.5 % at all sites in the winter, and Aulacoseira spp., which grow in warm water temperatures, were dominant in summer and autumn. Microcystis aeruginosa was dominant at 25.2% in summer only at site 5. mcyB and anaC have been detected as cyanotoxin synthetase genes. The phylogenetic tree of anaC could be divided into two groups (Group 1 & Group 2). Group 1 contained Aphanizomenon sp. and Cuspidothrix issatschenkoi. It is combined with Aphanizomenon sp. and Cuspidothrix issatschenkoi, which are known to produce cyanotoxins.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.232-240
• /
• 2023

The ecological expression of art in modern society takes the harmonious developmental relationship between man and nature as an element and combines it with the various manifestations of painting as an expression of ecological artistic development. The necessary relationship for the harmonious development of nature is accurately articulated, and the ecological changes in people are expressed in integrated materials that inspire human reflection. In the pursuit of material pleasures, mankind is neglectful and indifferent to the environment. The development of composite painting in art and ecology is a process that more reveres the harmony between man and nature as well as satisfying the creative value of the work. After systematic evaluation and research, people have engaged in various structural forms of composite art painting development in the long history of art development, focusing on the integration of environmental and ecological culture. In the process of nature education going through development, the comprehensive practical development of nature education is enhanced and efforts are made to feel new ecological art ideas and new ways of valuing environmental protection. In this paper, an observational study of eco-art will be carried out, starting from the theory of hierarchical division and analyzing the contradictory relationship between man and nature. Recognize nature, understand it and feel it through eco-art painting. The analysis of the contradictory relationship between man and nature is combined with the identification of various types of information that give value to the environmental protection public, and the combination of ecological painting and nature art to achieve an upgrade of the environmental protection idea of the value of painting. In the development of artistic ecological comprehensive painting, it is necessary to put forward technical requirements and standards that meet the development of modern industry according to the characteristics and methods of ecological painting. The author of this paper discusses the necessity and social value of artistic ecological painting creation from the artist's point of view, expounds the practical achievements of ecological painting from the perspective of the history and present situation of the development of ecological aesthetics at home and abroad, and gives the concept and creative method of contemporary art comprehensive material painting in combination with his own actual situation.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.75.2-76
• /
• 2021

MESSIER is a science satellite project to observe the Low Surface Brightness (LSB) sky at UV and optical wavelengths. The wide-field, optical system of MESSIER is optimized minimizing optical aberrations through the use of a Linear Astigmatism Free - Three Mirror System (LAF-TMS) combined with freeform mirrors. One of the key factors in observations of the LSB is the shape and spatial variability of the Point Spread Function (PSF) produced by scatterings and diffraction effects within the optical system and beyond (baffle). To assess the various factors affecting the PSF in this design, we use PhoSim, the Photon simulator, which is a fast photon Monte Carlo code designed to include all these effects, and also atmospheric effects (for ground-based telescopes) and phenomena occurring inside of the sensor. PhoSim provides very realistic simulations results and is suitable for simulations of very weak signals. Before the application to the MESSIER optics system, PhoSim had not been validated for confocal off-axis reflective optics (LAF-TMS). As a verification study for the LAF-TMS design, we apply Phosim sequentially. First, we use a single parabolic mirror system and compare the PSF results of the central field with the results from Zemax, CODE V, and the theoretical Airy pattern. We then test a confocal off-axis Cassegrain system and check PhoSim through cross-validation with CODE V. At the same time, we describe the shapes of the freeform mirrors with XY and Zernike polynomials. Finally, we will analyze the LAF-TMS design for the MESSIER optical system.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.165-172
• /
• 2019

The animated film Big Fish & Begonia is a new attempt of Chinese animated films in recent years. Both market performance and artistic creation are an improvement. In the process of creation in the past ten years, Big Fish & Begonia has profoundly excavated Chinese myths and legends and combined them with modern art. This study takes the traditional Chinese cultural elements in the film as the starting point for research, from the aspects of character design, scene design and national culture. Through the analysis of the traditional cultural elements in Big Fish & Begonia, try to find a better direction for the development of animated films, such as the integration of modern art and traditional culture. It is precisely because of the large number of Chinese cultural elements incorporated in the Big Fish & Begonia that it is ingeniously set up to bring visual enjoyment and inner resonance to the audience.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.23-23
• /
• 2022

Recently, soybean production and market price are unstable, even if demand of soybean is maintained. Diverse conditions such as climate change, a decrease in rural population, and consuming affect food industry. In this situation, food security is soaring as important key-word again, and MAFRA is promoting policies for improving soybean self-sufficiency with the goal of 40% until 2030. The point of policy is to extend a production and stabilize a demand for soybean with supporting large-scale soybean paddy-field complex. According to the background, soybean breeding and production research in NICS are proceeded with three parts. First, production improvement with soybean cultivation land enlargement and high-yield cultivar development. Various growth period soybean cultivars for double cropping, irrigation management technologies in paddy field, and hyper-yield and specific-region adaptable cultivar development. Second, reduction of production expense with mechanized cultivation and digital-based field management technologies. Third, consumer-friendly and high quality soybeans with high protein cultivar for alternative protein usage and high food process-ability for soy milk, tofu, soybean sprouts, and grain usage. Each part need to be combined and advanced to improve soybean industry and soybean self-sufficiency.