• 한국가스학회지
• /
• 제12권2호
• /
• pp.92-98
• /
• 2008

가스배관 열화부재의 실시간 역학물성 측정기술로 계장화 압입과 압입흔적 입체측정의 융합이 시도되었다. 압입하중-변위곡선을 계장화 압입시험으로 획득한 후 반사식 레이저 스캔너를 이용하여 압입흔적을 3차원으로 관찰하였다. 압흔 단면프로파일로부터 소성역 크기와 실제 접촉경계를 분석할 수 있었고, 두 값을 이용하여 소재의 항복강도와 경도를 계산하였다. 항복강도는 단축 인장시험에서 얻어진 값과 유사한 경향을 나타내었고, 경도는 재료쌓임 영향으로 압입곡선에서 계산된 값에 비해 $20{\sim}30%$ 낮은 값을 나타내었으나 최대 인장강도와 정량적인 관련성이 있음을 확인할 수 있었다. 덧붙여 압입하중 인가부의 형태를 수정하여 압입시험과 동시에 압흔주변 형상변화를 측정하기 위한 시스템도 고안되었다.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.189-213
• /
• 2020

Stainless-clad (SC) bimetallic steels that are manufactured by metallurgically bonding stainless steels as cladding metal and conventional mild steels as substrate metal, are kind of advanced steel plate products. Such advanced composite steels are gaining increasingly widespread usage in a range of engineering structures and have great potential to be used extensively for large civil and building infrastructures. Unfortunately, research work on the SC bimetallic steels from material level to structural design level for the applications in structural engineering field is very limited. Therefore, the aim of this paper is to investigate the material behaviour of the SC bimetallic steels under the cyclic loading which structural steels usually could encounter in seismic scenario. A number of SC bimetallic steel coupon specimens are tested under monotonic and cyclic loadings. The experimental monotonic and cyclic stress-strain curves of the SC bimetallic steels are obtained and analysed. The effects of the clad ratio that is defined as the ratio of the thickness of cladding layer to the total thickness of SC bimetallic steel plate on the monotonic and cyclic behaviour of the SC bimetallic steels are studied. Based on the experimental observations, a cyclic constitutive model with combined hardening criterion is recommended for numerical simulation of the cyclic behaviour of the SC bimetallic steels. The parameters of the constitutive model for the SC bimetallic steels with various clad ratios are calibrated. The research outcome presented in this paper may provide essential reference for further seismic analysis of structures fabricated from the SC bimetallic steels.

• Coupled systems mechanics
• /
• 제2권3호
• /
• pp.231-253
• /
• 2013

The impact of spar-nacelle-blade coupling on edgewise dynamic responses of spar-type floating wind turbines (S-FOWT) is investigated in this paper. Currently, this coupling is not considered explicitly by researchers. First of all, a coupled model of edgewise vibration of the S-FOWT considering the aerodynamic properties of the blade, variable mass and stiffness per unit length, gravity, the interactions among the blades, nacelle, spar and mooring system, the hydrodynamic effects, the restoring moment and the buoyancy force is proposed. The aerodynamic loads are combined of a steady wind (including the wind shear) and turbulence. Each blade is modeled as a cantilever beam vibrating in its fundamental mode. The mooring cables are modeled using an extended quasi-static method. The hydrodynamic effects calculated by using Morison's equation and strip theory consist of added mass, fluid inertia and viscous drag forces. The random sea state is simulated by superimposing a number of linear regular waves. The model shows that the vibration of the blades, nacelle, tower, and spar are coupled in all degrees of freedom and in all inertial, dissipative and elastic components. An uncoupled model of the S-FOWT is then formulated in which the blades and the nacelle are not coupled with the spar vibration. A 5MW S-FOWT is analyzed by using the two proposed models. In the no-wave sea, the coupling is found to contribute to spar responses only. When the wave loading is considered, the coupling is significant for the responses of both the nacelle and the spar.

• Earthquakes and Structures
• /
• 제20권4호
• /
• pp.431-444
• /
• 2021

T-shaped column is usually used as side column in buildings, which is one of the weak members in structural system. This paper presented a quasi-static cyclic loading experiment of six specimens of reinforced concrete (RC) T-shaped columns under compression-flexure-shear-torsion combined loadings to investigate the effect in the ratio of torsion to moment (T/M) and axial compression ratio (n) and height-thickness ratio of flange plate (φ) on their seismic performance. Based on the test results, the failure characteristics, hysteretic curves, ductility, energy dissipation, stiffness degradation and strength degradation were analyzed. The results show that the failure characteristics of RC T-shaped columns mainly depend on the ratio of torsion to moment, which can be divided into bending failure, bending-torsion failure and shear-torsion failure. With the increase of T/M ratio, the torsion ductility coefficient increased, and in a suitable range, the torsion and horizontal displacement ductility coefficient of RC T-shaped columns could be effectively improved with the increase of axial compression ratio and the decrease of height-thickness ratio of flange plate. Besides, the energy dissipation capacity of the specimens mainly depended on the bending and shear energy dissipation capacity. On the other hand, the increase of axial compression ratio and the ratio of torsion to moment could accelerate the torsional and bending stiffness degradation of RC T-shaped columns. Moreover, the degradation coefficient of torsion strength was between 0.80 and 0.98, and that of bending strength was between 0.75 and 1.00.

• 한국산학기술학회논문지
• /
• 제20권8호
• /
• pp.362-370
• /
• 2019

격납구조는 사고시 방사능 유출을 막기 위해 내압성능을 확보해야 하므로 소형 원자로용 격납구조에 모듈 방식을 적용하기 위해서는 내압성능의 분석이 필요하다. 따라서 소형 원자로용 모듈화 격납구조의 내압성능 분석을 위해 프리캐스트 콘크리트 모듈과 모듈 사이의 연결부 접촉면과 긴장재 배치를 고려한 FEM모델을 작성하고 정적해석을 수행한다. 이를 통해 모듈화 격납구조의 하중단계별 변위 및 응력의 변화특성을 분석한다. 그리고 변수 분석을 위해 선정된 각 변수가 모듈화 격납구조의 내압성능에 미치는 영향을 분석한다. 비교를 위해 일체화 격납구조의 내압성능도 함께 분석한다. FEM해석을 통한 변수 분석을 통해 긴장력 크기, 긴장재 배치 간격, 콘크리트 두께방향 긴장재 위치, 연결부 접촉면 마찰 계수 크기, 콘크리트 두께 등과 같은 변수 값의 범위가 제시되었다. 모듈화 격납구조의 모듈 간 접촉면에서 합성효과를 발생시켜주는 주요인자는 긴장재에 의한 긴장력과 연결부 접촉면의 마찰력이다. 일체화 격납구조 대비 추가적인 긴장재배치를 통해 긴장력을 증가시키면 모듈화 격납구조에서도 일체화 격납구조와 동등 수준의 내압성능을 확보할 수 있다.

• 한국해양공학회지
• /
• 제33권3호
• /
• pp.259-271
• /
• 2019

It is important to obtain reasonable predictions of the extent of the damage during maritime accidents such as ship collisions and groundings. Many fracture models based on different mechanical backgrounds have been proposed and can be used to estimate the extent of damage involving ductile fracture. The goal of this study was to compare the damage extents provided by some selected fracture models. Instead of performing a new series of material constant calibration tests, the fracture test results for the ship building steel EH36 obtained by Park et al. (2019) were used which included specimens with different geometries such as central hole, pure shear, and notched tensile specimens. The test results were compared with seven ductile fracture surfaces: Johnson-Cook, Cockcroft-Latham-Oh, Bai-Wierzbicki, Modified Mohr-Coulomb, Lou-Huh, Maximum shear stress, and Hosford-Coulomb. The linear damage accumulation law was applied to consider the effect of the loading path on each fracture surface. The Swift-Voce combined constitutive model was used to accurately define the flow stress in a large strain region. The reliability of these simulations was verified by the good agreement between the axial tension force elongation relations captured from the tests and simulations without fracture assignment. The material constants corresponding to each fracture surface were calibrated using an optimization technique with the minimized object function of the residual sum of errors between the simulated and predicted stress triaxiality and load angle parameter values to fracture initiation. The reliabilities of the calibrated material constants of B-W, MMC, L-H, and HC were the best, whereas there was a high residual sum of errors in the case of the MMS, C-L-O, and J-C models. The most accurate fracture predictions for the fracture specimens were made by the B-W, MMC, L-H, and HC models.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.221-230
• /
• 2019

In this paper, shear behavior of non-persistent joint surrounded in concrete and gypsum layers has been investigated using experimental test and numerical simulation. Two types of mixture were prepared for this study. The first type consists of water and gypsum that were mixed with a ratio of water/gypsum of 0.6. The second type of mixture, water, sand and cement were mixed with a ratio of 27%, 33% and 40% by weight. Shear behavior of a non-persistent joint embedded in these specimens is studied. Physical models consisting of two edge concrete layers with dimensions of 160 mm by 130 mm by 60 mm and one internal gypsum layer with the dimension of 16 mm by 13 mm by 6 mm were made. Two horizontal edge joints were embedded in concrete beams and one angled joint was created in gypsum layer. Several analyses with joints with angles of $0^{\circ}$, $30^{\circ}$, and $60^{\circ}$ degree were conducted. The central fault places in 3 different positions. Along the edge joints, 1.5 cm vertically far from the edge joint face and 3 cm vertically far from the edge joint face. All samples were tested in compression using a universal loading machine and the shear load was induced because of the specimen geometry. Concurrent with the experiments, the extended finite element method (XFEM) was employed to analyze the fracture processes occurring in a non-persistent joint embedded in concrete and gypsum layers using Abaqus, a finite element software platform. The failure pattern of non-persistent cracks (faults) was found to be affected mostly by the central crack and its configuration and the shear strength was found to be related to the failure pattern. Comparison between experimental and corresponding numerical results showed a great agreement. XFEM was found as a capable tool for investigating the fracturing mechanism of rock specimens with non-persistent joint.

• 한국물환경학회지
• /
• 제35권1호
• /
• pp.9-18
• /
• 2019

Recently, it was realized that a significant portion of pollution from urban areas originates from non-point sources such as construction sites, washoff from impervious surfaces, and sewage input from unsewered areas and combined sewer overflows. Especially, Urban stormwater runoff is one of the most extensive cause of the deterioration of the water quality in streams located in urban area. The objective of this study was to investigate runoff characteristics of non-point pollutants source at the urban area in the Suyeong River. Water quality variations were investigated at two points of Suyeong River during a period of 10 rainfall events. Concentration difference of non-point pollution source appeared big by precedent number of days of no rainfall. In addition, Event mean Concentration (EMCs) that well represents runoff characteristics of storm water during rainfall, was calculated, and runoff pollutants loading was also examined. The probability distribution of EMCs of BOD, COD, TOC, T-N, T-P, and TSS were analyzed and the mean values of observed EMC and the median values of estimated EMCs compared through probability distribution. Other objectives of this study were the characterization of discharge from non-point source, the analysis of the pollutant loads and an establishment of a management plan for non-point source of Suyeong River. Also, It was established that the most important thing for the administration of non-point pollution source is to come up with the solution for the reduction of effluent at the beginning.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.11-20
• /
• 2019

The purpose of this study was to propose a new approach for quantifying in situ rock mass damage, which would include a degree-of-damage and the degraded strength of a rock mass, along with its prediction based on real-time Acoustic Emission (AE) observations. The basic approach for quantifying in-situ rock mass damage is to derive the normalized value of measured AE energy with the maximum AE energy, called the degree-of-damage in this study. With regard to estimation of the AE energy, an AE crack source location algorithm of the Wigner-Ville Distribution combined with Biot's wave dispersion model, was applied for more reliable AE crack source localization in a rock mass. In situ AE wave attenuation was also taken into account for AE energy correction in accordance with the propagation distance of an AE wave. To infer the maximum AE energy, fractal theory was used for scale-independent AE energy estimation. In addition, the Weibull model was also applied to determine statistically the AE crack size under a jointed rock mass. Subsequently, the proposed methodology was calibrated using an in situ test carried out in the Underground Research Tunnel at the Korea Atomic Energy Research Institute. This was done under a condition of controlled incremental cyclic loading, which had been performed as part of a preceding study. It was found that the inferred degree-of-damage agreed quite well with the results from the in situ test. The methodology proposed in this study can be regarded as a reasonable approach for quantifying rock mass damage.

• 정보보호학회논문지
• /
• 제19권5호
• /
• pp.105-118
• /
• 2009

현대사회는 IT 기술의 급속한 발달과 초고속망을 통한 인터넷 및 컴퓨터의 보급으로 인해 정보사회라는 새로운 문화적 변환기를 맞이하고 있으며, 다양한 서비스 및 디바이스의 발전을 가져오고 있다. 그러나 보안 측면에서 고려해야 할 요구사항은 더욱 복잡해지고 다양화되고 있으며, 기존의 매체나 프로토콜이 갖고 있는 보안 취약성을 그대로 내포하게 된다. 유비쿼터스 오피스 네트워크 환경에서 이동성을 제공하는 디바이스는 상대적으로 컴퓨팅 능력이 낮아 기존에 개발된 보안 기능의 탑재가 어려우므로 단말 해킹, 바이러스 공격, 정보유출 등 다양한 공격이 시도될 가능성이 높다고 할 수 있다. 이에 대한 대책으로 제안된 PKI 인증 기술은 유비쿼터스 오피스 네트워크 서비스 제공 구조인 멀티도메인 환경에 적용하기에 적합하지 않으며, 변형된 인증체계 개발이 필요하다. 따라서 본 논문에서는 아이디 기반 공개키 방식 및 인가 티켓을 이용하여 안전하고 효율적인 로밍과 Main 디바이스 인증/인가 기술 및 Sub 디바이스 티켓을 이용한 인증/인가 기술에 관한 연구를 통하여 안전성과 효율성을 제공할 수 있다.