• 제목/요약/키워드: Combined Deterioration

검색결과 179건 처리시간 0.024초

노년기 정신장애의 전기경련치료 (Electroconvulsive Therapy for Psychiatric Disorders in Elderly Adults)

  • 주은정;김희철;강웅구;이남영;박승현;김정민;김용식;정인원
    • 생물정신의학
    • /
    • 제27권2호
    • /
    • pp.42-57
    • /
    • 2020
  • Electroconvulsive therapy (ECT) is indicated for various mental disorders (e.g., major depressive disorder, schizophrenia, and bipolar disorder) and the behavioral and psychological symptoms of dementia in elderly patients. Furthermore, ECT is a useful first-line treatment in emergency and crisis situations such as suicide risk, violent behavior, catatonia, and food refusal, which are more frequent in elderly patients. ECT is also effective in the treatment of the motor symptoms of neurological disorders, such as Parkinson's disease and Huntington's disease. Due to the high risk of various physical diseases, the comorbid physical conditions of elderly patients should be individually controlled to optimize ECT treatment. Compared to young adults, in elderly patients the seizure threshold is higher, the seizure duration is shorter, and the anesthetic dose is lower. On the contrary, the response rate in the elderly is both faster and higher. Considering potential cognitive decline and the prevention of further deterioration of cognitive function in elderly patients, in the absence of significant comorbidities, twice weekly sessions and right unilateral electrode placement with a lower seizure threshold and less cognitive effect are preferred to bilateral electrode placement, which has a high risk of adverse cognitive effects. After an acute course of ECT, continuation and maintenance of ECT, combined with prescription of therapeutic drugs, may prevent possible relapse or recurrence of mental disorders. In conclusion, ECT can be used to treat mental disorders in elderly adults, with safety and effectiveness comparable to that in young adults.

강우 시 수영강 유역의 수질변화 특성 (Characteristics of Changes in Water Quality in the Suyoung River During Rainfall Event)

  • 김수현;김정선;강임석
    • 한국물환경학회지
    • /
    • 제35권1호
    • /
    • pp.9-18
    • /
    • 2019
  • Recently, it was realized that a significant portion of pollution from urban areas originates from non-point sources such as construction sites, washoff from impervious surfaces, and sewage input from unsewered areas and combined sewer overflows. Especially, Urban stormwater runoff is one of the most extensive cause of the deterioration of the water quality in streams located in urban area. The objective of this study was to investigate runoff characteristics of non-point pollutants source at the urban area in the Suyeong River. Water quality variations were investigated at two points of Suyeong River during a period of 10 rainfall events. Concentration difference of non-point pollution source appeared big by precedent number of days of no rainfall. In addition, Event mean Concentration (EMCs) that well represents runoff characteristics of storm water during rainfall, was calculated, and runoff pollutants loading was also examined. The probability distribution of EMCs of BOD, COD, TOC, T-N, T-P, and TSS were analyzed and the mean values of observed EMC and the median values of estimated EMCs compared through probability distribution. Other objectives of this study were the characterization of discharge from non-point source, the analysis of the pollutant loads and an establishment of a management plan for non-point source of Suyeong River. Also, It was established that the most important thing for the administration of non-point pollution source is to come up with the solution for the reduction of effluent at the beginning.

요소제거모델을 활용한 열전달해석에서 터널 화재이력곡선의 초기가열구배에 따른 대류열전달계수의 변화 (Variation of time-dependent convection beat transfer coefficients in beat transfer analysis at various initial beating rates of tunnel fire scenarios)

  • 최순욱;장수호;이춘환;안성율
    • 한국터널지하공간학회 논문집
    • /
    • 제12권3호
    • /
    • pp.223-237
    • /
    • 2010
  • 본 연구에서는 화재에 의한 콘크리트의 단면손실과 역학적 특성을 저하하는 주요 요인 가운데 온도증가율, 즉 초기가열구배를 변화시키면서 모의화재실험을 수행하였다. 그리고 수행된 모의화재실험에서 관찰된 단면손실을 모사하기 위하여 요소제거모델을 활용한 유한요소해석법에 의해 열전달해석을 수행하였다. 이때 모의화재실험결과와 수치해석결과가 가장 일치하는 대류열전달계수를 반복적인 해석과정을 통해 도출하였다 이상의 과정으로부터 얻어진 초기가열구배에 따른 대류열전달계수의 변화를 조사한 결과, 각 초기가열구배별 대류열전달계수의 변화는 분수함수 형태로 근사시킬 수 있었다. 최종적으로 모의화재실험으로부터 도출된 초기가열구배별 대류열전달계수의 변화 결과를 내삽하여 다양한 초기가열구배에 따른 화재경과시간별 대류열전달계수의 변화를 추정할 수 있는 수식을 함께 제시하였다.

사출 성형 공정에서의 변수 최적화 방법론 (Methodology for Variable Optimization in Injection Molding Process)

  • 정영진;강태호;박정인;조중연;홍지수;강성우
    • 품질경영학회지
    • /
    • 제52권1호
    • /
    • pp.43-56
    • /
    • 2024
  • Purpose: The injection molding process, crucial for plastic shaping, encounters difficulties in sustaining product quality when replacing injection machines. Variations in machine types and outputs between different production lines or factories increase the risk of quality deterioration. In response, the study aims to develop a system that optimally adjusts conditions during the replacement of injection machines linked to molds. Methods: Utilizing a dataset of 12 injection process variables and 52 corresponding sensor variables, a predictive model is crafted using Decision Tree, Random Forest, and XGBoost. Model evaluation is conducted using an 80% training data and a 20% test data split. The dependent variable, classified into five characteristics based on temperature and pressure, guides the prediction model. Bayesian optimization, integrated into the selected model, determines optimal values for process variables during the replacement of injection machines. The iterative convergence of sensor prediction values to the optimum range is visually confirmed, aligning them with the target range. Experimental results validate the proposed approach. Results: Post-experiment analysis indicates the superiority of the XGBoost model across all five characteristics, achieving a combined high performance of 0.81 and a Mean Absolute Error (MAE) of 0.77. The study introduces a method for optimizing initial conditions in the injection process during machine replacement, utilizing Bayesian optimization. This streamlined approach reduces both time and costs, thereby enhancing process efficiency. Conclusion: This research contributes practical insights to the optimization literature, offering valuable guidance for industries seeking streamlined and cost-effective methods for machine replacement in injection molding.

저온살균과 대기압플라즈마의 병용처리에 의한 고춧가루 중 대장균의 저감화 효과 및 관능적 품질 (Combined Effects of Low-Temperature Heating and Atmospheric Plasma on the Populations of Escherichia coli and Sensorial Quality of Red Pepper Powder)

  • 전은비;최만석;김지윤;박신영
    • 한국식품위생안전성학회지
    • /
    • 제35권1호
    • /
    • pp.68-74
    • /
    • 2020
  • 본 연구는 저온살균(60℃, 5-20분)과 대기압플라즈마(5-20분)를 병용한 고춧가루 중의 E. coli 저감화 및 시너지 효과를 조사하였다. 저온살균 단일처리시 대장균의 불활성화는 최대 2 log10 CFU/g(=99% 감소) 이상 나타내었으며, 대기압플라즈마 5, 10, 15, 및 20분간 단일처리 하였을 때 각각 0.4, 0.8, 0.9 및 1.4 log10 CFU/g 감소되었다. 저온살균 및 대기압플라즈마 단독 처리만으로는 만족할 만한 미생물 저감화효과를 얻을 수 없었기에 저온살균 처리 후, 대기압플라즈마를 병용처리 하여 대장균의 불활성화는 1-6 log10 CFU/g 이상 감소되었다. 그러나, 저온살균과 대기압플라즈마 병용처리에 따른 관능적 품질 (색, 이취, 맛, 조직감 및 전체적인 기호도)에 대한 유의적인 차이는 관찰되지 않았다(P>0.05). 따라서 고춧가루의 미생물학적 안전성 확보를 위해 저온살균과 대기압플라즈마 단독처리보다 이 둘의 병용처리가 E. coli의 확실한 저감화 효과를 유도하고 식품 고유의 품질특성을 유지하는데 효과적이었음을 본 연구를 통해 확인되었다.

반응표면분석법으로 최적화한 초음파와 저온 블랜칭의 병용처리 조건이 신선편이 양상추의 갈변과 품질에 미치는 영향 (Effects of Optimized Co-treatment Conditions with Ultrasound and Low-temperature Blanching Using the Response Surface Methodology on the Browning and Quality of Fresh-cut Lettuce)

  • 김도희;김수민;김한빛;문광덕
    • 한국식품저장유통학회지
    • /
    • 제19권4호
    • /
    • pp.470-476
    • /
    • 2012
  • 신선편이 양상추는 유통 중 갈변과 이취 및 무름현상이 발생되고, 미생물의 증식에 의해 안전성이 위협받는 등 원재료보다 품질 저하현상이 빠르다는 문제점이 있다. 또한, 건강지향적인 시대가 도래함에 따라, 선도 유지를 위한 화학적 처리를 거친 식품은 기피하는 실정이다. 이에 일반적인 블랜칭의 단점을 보완할 수 있는 저온블랜칭과, 다른 기술과 병용처리 시 synergy effect를 기대할 수 있는 초음파를 병용처리함으로써 신선편이 양상추의 품질특성 변화에 대해 알아보고자 하였다. 최적 병용처리조건은 예비실험을 토대로 확립하였으며, central composite design에 의한 반응표면분석법을 이용하였다. 즉, 독립변수를 ultrasonication time ($x_1$), blanching temperature ($x_2$) 및 blanching time ($x_3$), 종속변수를 ${\Delta}E$ value (y)로 하여 반응표면분석을 실시한 결과, 90초간 ultrasonication한 후 $45^{\circ}C$에서 90초간 blanching (US+LB)하는 것이 색도 변화가 가장 적은 것으로 나타났다. 최적병용처리구와 각각의 단일처리구 및 무처리구를 $10^{\circ}C$에서 9일간 저장하면서 실험을 실시한 결과, 전반적으로 US+LB 처리구가 유의적으로 높은 $L^*$값이 나타났으며, $a^*$, $b^*$, ${\Delta}E$ value, browning index, PPO 및 POD 활성, 총균수에서 유의적으로 낮은 것으로 나타났다(p<0.05). 또한, appearance, color, aroma, freshness, texture, overall acceptibility의 6가지 항목으로 관능평가를 실시한 결과, 모든 항목에서 US+LB 처리구가 가장 우수한 것으로 나타나, 이화학적 실험결과와도 일치하는 경향임을 알 수 있었다. 이로써, 초음파와 저온블랜칭의 병용처리는 신선편이 양상추의 품질 유지에 효과적인 방법인 것으로 확인되었다.

수화물 및 공극률 관측 실험을 통한 시멘트모르타르의 탄산화 특성 변화에 대한 연구 (A Study on Change in Cement Mortar Characteristics under Carbonation Based on Tests for Hydration and Porosity)

  • 권성준;송하원;박상순
    • 콘크리트학회논문집
    • /
    • 제19권5호
    • /
    • pp.613-621
    • /
    • 2007
  • 내구성에 대한 중요성이 부각됨에 따라, 주요 열화현상인 탄산화에 대한 연구가 많이 진행되고 있다. 그러나 탄산화에 대한 연구는 주로 탄산화 깊이의 도출에 국한하고 있으며 경화된 콘크리트를 가정하므로 실제적인 탄산화 거동과는 많은 차이를 보이고 있다. 강재와는 다르게 콘크리트는 공극률과 내부의 수화물의 거동이 매우 중요한데, 탄산화 진행에 따라 초기재령에서 결정되어지는 거동 (공극률 및 수화물)이 다르게 변화한다. 열화 물질의 이동은 주로 콘크리트의 공극률 및 포화도에 의존하므로, 탄산화 후의 거동 평가는 장기열화해석 및 복합열화해석 등에 고려되는 것이 바람직하다. 공극률의 경우, 변화된 공극률이 고려되지 않으면 확산계수의 감소가 구현될 수 없으며 이에 따라 과다한 탄산화 해석을 야기하게 된다. 한편 수화물, 특히 수산화칼슘의 잔존량 평가는 탄산화 깊이의 평가 및 내부 공극수의 특성 변화를 결정하기도 하며, 복합열화에서 발생하는 고정화 염화물량에 큰 영향을 주게 된다. 그러므로 실내 실험들을 통한 공극률 및 수화물 분석은 최근들어 탄산화에 대해서도 많이 적용되고 있다. 본 연구는 미세 관측 실험을 통하여, 탄산화 전후의 공극률 분포 변화, 수화물 거동의 변화를 실험적으로 수행하였다. 공극률 측정으로는 MIP 실험을, 수화물 변화에서는 TGA 실험을 수행하였으며, 기존의 해석 모델인 다상복합수화발열모델 및 미세 공극 구조 형성모델을 개선하여 각각의 탄산화 이후의 공극률 변화 및 수화물 변화를 개발하였다. 개발된 각각의 모델의 결과는 탄산화 전후의 공극률 및 수화물의 변화를 잘 예측하였으며, 탄산화 이후의 열화현상 등에 기초적으로 사용될 수 있을 것으로 평가되었다.

The Role of Radiosurgery in Patients with Brain Metastasis from Small Cell Lung Carcinoma

  • Jo, Kwang-Wook;Kong, Doo-Sik;Lim, Do-Hoon;Ahn, Yong-Chan;Nam, Do-Hyun;Lee, Jung-Il
    • Journal of Korean Neurosurgical Society
    • /
    • 제50권2호
    • /
    • pp.99-102
    • /
    • 2011
  • Objective : The purpose of this retrospective study was to evaluate the outcome of gamma knife radiosurgery (GKRS) and/or whole brain radiation therapy (WBRT) for the treatment of small cell lung carcinoma (SCLC) metastasis to the brain. Methods : From 2000 to 2010, 50 patients underwent GKRS for metastatic brain lesions originating from SCLC. Among these patients, 11 received prophylactic cranial irradiation (PCI) before the development of metastatic lesions (PCI group), and GKRS was performed as an initial treatment for newly diagnosed lesions in 12 patients who had not received PCI (primary GKRS group). In addition, GKRS was performed as a salvage treatment for progressive lesions after WBRT in 27 patients (salvage GKRS group). The medical records and imaging data of all patients were retrospectively analyzed. Results : The overall survival of the 50 patients was 20.8 months (range 1-53) after the diagnosis of primary tumor and 12.0 months (range 1-47) after the development of cerebral metastasis. Median survival after GKRS was 4.8 months (range 1-15) in the PCI group, 4.6 months (range 0-18) in the primary GKRS group, and 7.6 months (range 0-33) in the salvage GKRS group. Further treatment for progressive lesions after GKRS was necessary in 15 patients, after a mean interval of 3.8 months. Causes of death were systemic organ failure in 15 patients, deterioration of neurological state in 13 patients, and unknown or combined causes in 16 patients. The local control rate of the lesions treated with GKRS was 76.4% (decreased in 13 patients and stable in 16 patients at the final imaging follow-up (mean 5.60 months). Conclusion : GKRS is an effective local treatment for brain metastasis from SCLC both as an initial treatment for newly diagnosed lesions after PCI and as a salvage treatment for recurrent or progressive lesions. However, the survival benefit is not significant because most patients die of systemic multi-organ failure with a short life expectancy.

TDMA 방식에서 ATM 전송을 위한 셀 지연 변이의 보상 해석 (Compensation Analysis of Cell Delay Variation for ATM Transmission in the TDMA Method)

  • 김정호;최경수
    • 한국정보처리학회논문지
    • /
    • 제3권2호
    • /
    • pp.295-304
    • /
    • 1996
  • 여러가지 미디어를 통합하여 처리가 가능한 광대역 ISDN의 서비스 전개를 경제적 으로 실현하기 위해서는 지상망과 위성망을 조합한 시스템을 구축하는 것이 필요하다. 이러한 위성을 이용한 전송방식으로서는 다양한 지역에 산재한 사용자를 효율적으로 수용 가능한 TDMA 방식이 활용되고 있다. 그러나 동기 방식인 위성 TDMA회선과 비동기 전송 모드인 ATM을 이용하는 지상망의 접속에 있어서는 셀 지연 변이로 대표되는 ATM 전송품질의 열화가 큰 문제로 된다. 따라서 비동기 전송에 대응 가능한 지연 변이의 보상 방식이 필요하게 된다. 이 ATM과 TDMA 간의 변환에서는 지연 변이의 초대 효율을 요구값 이하로 억제하고 전송 셀의 버스트 특성이 증가하지 않는 조건으로 위성회선을 효율적으로 이용하는 방법 등이 연구되고 있다. 본 논문에서는 우선 지상망에서 검토되 殷있는 타임 스탬프(time stamp)방식을 지연변이 보상 방법으로 위성회선에 이용한 경우의 문제점을 해석하였다.그리고이를 해결하기 위한 이산 셀 계수 방법을제안하여 셀전송 타이밍 정보의 전송용량과 오류율을 해석하였다. 또한 셀 전송타이밍 정보에 부호 오류가 일어난 경우에도 시스템은 안정되게 동작하고 신뢰성이 검증되어 제안된 보상 방법이 우수함을 알 수 있다.

  • PDF

논산 관촉사 석조미륵보살입상의 재질분석과 표면상태 변화 모니터링 (Material Analysis and Surface Condition Monitoring of Standing Buddha Statue in the Gwanchoksa Temple, Nonsan, Korea)

  • 이명성;최명주;유지현;안유빈
    • 암석학회지
    • /
    • 제28권4호
    • /
    • pp.227-236
    • /
    • 2019
  • 논산 관촉사 석조미륵보살입상은 중립 내지 조립질의 흑운모 화강섬록암으로 구성되어 있으며 석불의 제작 시기 및 장소에 대해 고문헌에 반야산의 서북쪽에서 제작되어 동쪽으로 이동하였다는 기록이 있어 채석지가 명확하다. 또한 석불과 주변 기반암의 암상, 조직, 전암대자율 및 감마스펙트로미터 비교 결과, 모두 유사한 특성으로 보여 동일한 기원의 암석으로 판단된다. 이 석불에서 관찰되는 표면오염물에 의한 훼손은 환경적인 요인과 보수물질의 노후에 의한 복합적 요인이 발생하는 것이며, 2007년 제거작업 이후에도 점차 증가하는 경향을 보이므로 지속적인 모니터링이 필요할 것으로 판단된다. 조류의 경우 석조문화재의 표면에 생물학적 오염이 발생하는 경우 착생이 가장 빠르게 진행되며, 곰팡이와 공생체를 이루어 이차적으로 지의류의 착생 가능성이 있어 위치 및 분포 범위에 대한 변화 관찰이 요구된다. 또한 노후된 보수물질은 염의 정출에 따른 오염물 발생, 탈락으로 인한 결합력 저하 등으로 이차적인 훼손이 발생할 수 있으므로 적절한 보존관리를 통해 안정성을 확보하는 것이 바람직하다.