• 대한치과교정학회지
• /
• 제34권4호
• /
• pp.303-312
• /
• 2004

전치의 후방 견인시 교정력은 치아의 저항중심에서 벗어난 브라켓을 통해 적용되기 때문에 바람직하지 못한 경사이동이 발생하게 되고 이를 방지하기 위한 여러 가지 방법 중 호선에 curve나 전치부 호선에 치근 설측 토그를 부여하는 방법이 많이 사용된다. 이에 본 연구는 combination loop archwire와 hook을 이용한 활주역 학을 이용하여 전치를 후방 견인 시, compensating curve를 0도, 15도, 30도 부여하고, 이 때 나타나는 효과를 광탄성법으로 비교 연구하기 위하여 치아와 치조골 모형을 광탄성 모형으로 대체시키고 와이어와 브라켓을 주어진 조건으로 위치시 킨 후 편광판을 이용하여 초기 응력 상태를 분석하여 다음과 같은 결과를 얻었다. 1. Combination loop archwire와 활주역학으로 전치를 후방 견인 시 compensating curve가 0도, 15도, 30도로 증가할수록 전치부 치근단 부위의 최대 무의차수가 감소하였다. 2. Combination loop archwire와 활주역 학으로 전치를 후방 견인 시 compensating curve가 0도, 15도, 30도로 증가할수록 견치와 소구치 부위의 최대 무의차수가 증가하였다. 3. Combination loop archwire로 전치를 견인할 때보다 동일한 힘을 사용하여 활주역 학으로 견인할 때 전치부 치근단 부위에서 다소 낮은 무의차수를 나타내었다. 이상의 결과에서 Combination loop archwire와 활주역학을 이용한 상악전치의 후방 견인시 견인방법에 큰 차이 없이 호선에 부여한 compensating curve는 전치의 설측 경사이동 양상을 어느 정도 감소시킬 수 있음을 확인하였다. 또한 힘의 적용위치가 저항중심에 더욱 가까운 hook을 이용한 활주 역학이 전치의 설측경사 방지에 더 효과적일 것으로 판단된다.가 높게 나타나는 현상을 부분적으로 설명하여 주는 것으로 사료된다.용한 정보를 제공할 수 있을 것으로 보인다.ing할 경우, arch perimeter의 증가량은 Curve of Spee의 최대 길이의 1/2보다 적게 나타났다.$(_{60}PBS)$는 전단결합강도(SBS)의 $34\%$ 수준이었으며, 인장결합강도(TBS)에 대해서는 $61\%$ 수준이었으며, Non-etched Foil-Mesh base에서 최저 Peel 결합 강도$(_{60}PBS)$는 전단결합강도(SBS)의 $34\%$ 수준이었으며, 인장결합강도(TBS)에 대해서는 $55\%$ 수준이었다. 4. 단위 면적 당 결합강도에 있어서 전단결합강도(SBS)와 인장결합강도(TBS) 및 $75^{\circ}\;와\;90^{\circ}$ peel 결합강도는 Micro-Loc base와 Chessboard base에서 차이 가 없었으며 Non-etched Foil-Mesh base에서 가장 작았고(p<0.05), $0^{\circ},\;15^{\circ},\;30^{\circ},\;60^{\circ}$ peel응력을 적용한 결과 Chessboard base에서 가장 큰 Peel결합강도를, Non-etched Foil-Mesh base에서 가장 작은 결합강도를 보였다(p<0.05).았다. 6. 주사전자현미경으로 본 표면은 모든 제품에서 생산과정 중에 보이는 압흔과 pitting이 관찰되는데, 진성기업의 Stainless Steel은 가늘고 긴 압흔이 있으며 비교적 매끄러운 표면을 보이고, Unitek사의 경우 압흔과 함께 pitting 이 관찰되며, Ormco Stainless Steel의 경우 불규칙한 pitting이 다수 존재했다

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권7호
• /
• pp.41-53
• /
• 2013

The study is to propose the optimal separation technique of heavy metals (Pb and Zn) contaminated in soil for improving the removal efficiency by various applicable techniques. The heavy metal contaminated soil samples near abandoned mine X-1 and X-2 were used for the study. Firstly, the wet classification process was shown more than 80% of removal efficiency for lead and zinc. Meanwhile, the magnetic separation process was shown low removal efficiency for lead and zincs because those heavy metals were non-magnetic materials. For the next step, the flotation separation process was shown approximately 24.4% of removal efficiency for zinc, while the gravity concentration process was shown approximately 57% of removal efficiency for lead, and 19.9% of removal efficiency for zinc, respectively. Therefore, zinc contaminated in soil would be effectively treated by the combination technique of the wet classification and the flotation technique. Meanwhile, lead contaminated in soil would be effectively treated by the combination technique of the wet classification process and the flotation process. Furthermore, the extraction of organic matter was shown more effective with aeration, 3% of hydrogen peroxide and 3% of lime such as calcium hydroxide.

• 척추신경추나의학회지
• /
• 제9권1호
• /
• pp.89-101
• /
• 2014

상기 증례에서 저자는 극상근건 부분 파열 환자에게 한방치료 및 ART 치료를 적용하여 견관절 ROM, VAS 평가를 통해 다음과 같은 결론을 얻었다. 1. 극상근건 부분 파열로 견통 및 견관절 ROM 제한 발생한 환자에게 한방치료 및 ART 치료를 적용하여 견관절 ROM, VAS에서 현저한 개선 보인 것을 확인할 수 있었다. 2. 비교적 증례가 많지 않고 한방적 치료 과정이 정립되어 있지 않은 극상근건 부분 파열에 한방 치료와 ART 치료를 병행하는 것이 효과가 있음 을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1140-1145
• /
• 2004

Laser-induced incandescence (LII) is introduced as a valuable tool for the characterization of nanoparticles in flame environments. This technique is based on the heating of the particles by a short laser pulse and the subsequent detection of the thermal radiation. It has been applied successfully for the investigation of soot in different fields of application. The evaluation of the temporal decay of the laser-induced incandescence (LII) signal from soot particles is introduced as a technique to obtain two-dimensional distributions of particle sizes and is applied to a laminar diffusion flame. This novel approach to soot sizing exhibits several theoretical and technical advantages compared with the established combination of elastic scattering and LII, especially as it yields absolute sizes of primary particles without requiring calibration. With this technique a spatially resolved 2-D measurement of soot primary particle sizes is feasible in a combination process form the ratio of emission signals obtained at two delay times after a laser pulse, as the cooling behavior is characteristic of particle size.

• PNF and Movement
• /
• 제16권3호
• /
• pp.333-343
• /
• 2018

Purpose: The purpose of this study was to investigate the effects of a neck exercise using a proprioceptive neuromuscular facilitation (PNF) neck flexion and extension pattern on body balance in a progressive range of positions (supine, prone on elbow, and sitting), on numbness in the upper extremities, and on neck flexion motions in cervical myelopathy patients. Methods: One participant who was diagnosed with cervical myelopathy participated in this study. A reversal design (A-B-A') was used. The A and A' were the baseline period (no intervention), and B was the intervention period. The intervention used a neck extension pattern with a hold-relax technique and a neck flexion pattern with a combination of isotonic techniques in the supine position. Then, neck flexion and extension patterns were applied together with a reversal technique for stabilization, followed by a neck extension pattern with a combination of isotonic techniques in the prone position on the elbows. Finally, a neck flexion and extension pattern was used with a stabilizing reversal technique, and a neck extension pattern was applied with a combination of isotonic techniques in the sitting position for 60 minutes per day, 3 times per week for 8 weeks. To measure balance, numbness, and neck motion during neck flexion, the one-leg stand test and the visual analogue scale were used. Results: The right and left one-leg stand tests showed increased balance ability in the intervention phase. Upper extremity numbness was decreased in the intervention phase, and neck flexion motion was increased in the intervention phase. These increases were maintained after the intervention (Baseline II). Conclusion: These results suggest that a neck exercise using a PNF neck pattern with additional techniques in a progressive range of positions has a positive effect on cervical myelopathy patients for balance, numbness, and neck motion.

• The Korean Journal of Ecology
• /
• 제20권5호
• /
• pp.303-313
• /
• 1997

A new evaluation technique, i.e. multicriterion matrix technique, on the vegetation assessment was proposed and compared with several techniques having been previously used in the environmental impact assessment. Four criterias and 10 subcriterias were selected for two evaluation indices such as vegetation naturalness value and vegetation class. These criterias were characterized by syntaxonomical informations of hemeroby concept and potential vegetation, hierarchical system between criterias, and ordinal scale of vegetation naturalness valuse. Vegetation naturalness values were classified into 11 ordinal levels and condensed to five vegetation classes for facilitating practical use. In the example study two sites were compared by using two indices. This technique could have useful applications for ssessment of regional vegetation. A vegetation map of naturalness described by combination of two indices was proposed in order to illustrate regional vegetation naturalness.

• Architectural research
• /
• 제11권2호
• /
• pp.43-49
• /
• 2009

Since the late 1980s, the schedule technique applied to the construction industry around the world has rapidly changed from the traditional ADM (Arrow Diagramming Method) to the PDM (Precedence Diagramming Method) technique. The main reason for this change is to overcome the limits and inconveniences of the traditional ADM technique. The time-cost trade-off is one of the core scheduling techniques to establish the best optimized combination plan in terms of a relationship between the cost and schedule. However, most of the schedule-related textbooks and research papers have discussed and proposed applications of a time-cost trade-off technique based only on the Finish to Start relationship. Therefore, there are almost no consideration and discussion of problems or restrictions that emerge when the time-cost trade-off technique is applied to the PDM network that has overlapping relationships. This paper proposes the lead-time adjustment method as a methodology for overcoming some restrictions that are encountered when the time-cost trade-off technique is applied to the overlapping relationships of the PDM network.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.526-534
• /
• 2000

Near-net-shape forming of zirconia powder was investigated under the combination of cold die and isostatic pressing and pressureless sintering. A novel combination pressing technique, i.e., die com paction under cold isostatic pressing, allowed to produce a complex shaped ceramic powder compact with the controlled dimensions and relatively uniform density distributions. The constitutive models proposed by Kim and co-workers for densification of ceramic powder under cold compaction and high temperature were implemented into a finite element program (ABAQUS). Experimental data for relative density distributions and deformations of zirconia powder compacts produced by cold combination pressing and pressureless sintering were compared with finite element results. Finite element results agreed well with experimental data.

• 한국콘텐츠학회논문지
• /
• 제20권12호
• /
• pp.49-57
• /
• 2020

본 연구는 우리나라 수출 분야 산업의 경쟁력을 나타내는 부가가치율을 다양한 머신러닝 기법을 활용하여 예측하였다. 아울러, 예측의 정확성 및 안정성을 높이기 위하여 머신러닝 기법 예측값들에 예측조합 기법을 적용하였다. 특히, 본 연구는 산업별 부가가치율에 영향을 주는 다양한 변수를 고려하기 위하여 재귀적특성제거 방법을 사용하여 주요 변수를 선별한 후 머신러닝 기법에 적용함으로써 예측과정의 효율성을 높였다. 분석결과, 예측조합 방법에 따른 예측값은 머신러닝 기법 예측값들보다 실제의 산업 부가가치율에 근접한 것으로 나타났다. 또한, 머신러닝 기법의 예측값들이 큰 변동성을 보이는 것과 달리 예측조합 기법은 안정적인 예측값을 나타내었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권9호
• /
• pp.1192-1196
• /
• 2004

In order to detect the molecular mechanism of heterosis in pigs, the mRNA differential display technique was performed to investigate the differences in gene expression of pig's Longissimus dorsi between the high-parent heterosis cross combination Landrace${\times}$Large White and the mid-parent heterosis cross combination Large White${\times}$Meishan. Three pig purebreds, Large White, Meishan, and Landrace and four types of reciprocal $F_1$ hybrids were analyzed using nine 3'-end anchored primers in combination with ten 5'-end arbitrary primers and nearly 7,000 reproducible bands were examined. The patterns of gene expression of each cross combination were analyzed and eight common patterns (fifteen kinds) were found. When the results from the two cross combinations were put together and compared, eight different typical expression patterns were observed, these indicated that the patterns of gene expression of these two cross combinations had obvious differences. Gene expression correlation and cluster analyses of the two cross combinations indicated that the gene expression of the mid-parent heterosis cross combination was correlated with maternal effect, but in the high-parent heterosis cross combination, paternal effect acted in the gene expression of the hybrids or the gene expression of the hybrids was biased towards one parent.